• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.2
• /
• pp.135-141
• /
• 2015

In this study, two different uniform placement methods are proposed for each of Tetrapod, Rakuna-IV, and Dimple armoring a rubble mound breakwater, and the corresponding stability coefficients are determined by hydraulic experiments. The Tetrapod and Rakuna-IV show similar stability coefficients regardless of the placement methods, whereas the Dimple shows somewhat different stability coefficients depending on the placement methods. It is shown that the Dimple gives the largest stability coefficient, whereas the Tatrapod gives the smallest value. The uniform placement methods of Tatrapod and Rakuna-IV give slightly larger stability coefficients than the random placement, whereas the uniform placements of Dimple give much larger stability coefficients than the random placement. However, the small void ratio of uniform placements of Dimple requires attention because the blocks would behave like single layer system blocks so that brittle failure could occur.

• The Korean Journal of Applied Statistics
• /
• v.30 no.6
• /
• pp.931-941
• /
• 2017

Typical Nonparametric methods for randomized block design with replications are two methods proposed by Mack (1981) and Mack and Skillings (1980). This method is likely to cause information loss because it uses the average of repeated observations instead of each repeated observation in the processing of each block. In order to compensate for this, we proposed a test method using linear placement statistics, which is a score function applied to the joint placement method proposed by Chung and Kim (2007). Monte Carlo simulation study is adapted to compare the power with previous methods.

• International Journal of Computer Science & Network Security
• /
• v.22 no.4
• /
• pp.147-158
• /
• 2022

Cloud Computing offers flexible, on demand, ubiquitous resources for cloud users. Cloud users are provided computing resources in a virtualized environment. In order to meet the growing demands for computing resources, data centres contain a large number of physical machines accommodating multiple virtual machines. However, cloud data centres cannot utilize their computing resources to their total capacity. Several policies have been proposed for improving energy proficiency and computing resource utilization in cloud data centres. Virtual machine placement is an effective method involving efficient mapping of virtual machines to physical machines. However, the availability of many physical machines accommodating multiple virtual machines in a data centre has made the virtual machine placement problem a non deterministic polynomial time hard (NP hard) problem. Metaheuristic algorithms have been widely used to solve the NP hard problems of multiple and conflicting objectives, such as the virtual machine placement problem. In this context, we presented essential concepts regarding virtual machine placement and objective functions for optimizing different parameters. This paper provides a taxonomy of metaheuristic algorithms for the virtual machine placement method. It is followed by a review of prominent research of virtual machine placement methods using meta heuristic algorithms and comparing them. Finally, this paper provides a conclusion and future research directions in virtual machine placement of cloud computing.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.6
• /
• pp.58-65
• /
• 1993

In this research, we developed a new algorithm for hierarchical placement of integrated circuits. For efficient placement of a large circuit, the given circuit is recursively partitioned to form a hierarchy tree and then simulated-annealing-based placement method is applied at each level of the hierarchy to find a near optimum solution. During the placemtnt, global optimization is performed at high levels of the hierarchy and local optimization is performed at low levels. When compared with conventional placement methods, the new hierarchical placement method produced favorable results.

• Smart Structures and Systems
• /
• v.14 no.1
• /
• pp.55-70
• /
• 2014

The paper presents a multi-objective optimization strategy for a multi-type sensor placement for Structural Health Monitoring (SHM) of long span bridges. The problem is formulated for simultaneous placement of strain sensors and accelerometers (heterogeneous network) based on application demands for SHM system. Modal Identification (MI) and Accurate Mode Shape Expansion (AMSE) were chosen as the application demands for SHM. The optimization problem is solved through the use of integer Genetic Algorithm (GA) to maximize a common metric to ensure adequate MI and AMSE. The performance of the joint optimization problem solved by GA is compared with other established methods for homogenous sensor placement. The results indicate that the use of a multi-type sensor system can improve the quality of SHM. It has also been demonstrated that use of GA improves the overall quality of the sensor placement compared to other methods for optimization of sensor placement.

• Smart Structures and Systems
• /
• v.4 no.4
• /
• pp.465-492
• /
• 2008

Proper pretest planning is a vital component of any successful vibration test on engineering structures. The most important issue in dynamic testing of many engineering structures is arriving at the number and optimal placement of sensors. The sensors must be placed on the structure in such a way that all the important dynamic behaviour of a structural system is captured during the course of the test with sufficient accuracy so that the information can be effectively utilised for structural parameter identification or health monitoring. Several optimal sensor placement (OSP) techniques are proposed in the literature and each of these methods have been evaluated with respect to a specific problem encountered in various engineering disciplines like aerospace, civil, mechanical engineering, etc. In the present work, we propose to perform a detailed characteristic evaluation of some selective popular OSP techniques with respect to their application to practical civil engineering problems. Numerical experiments carried out in the paper on various practical civil engineering structures indicate that effective independence (EFI) method is more consistent when compared to all other sensor placement techniques.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.91-108
• /
• 2000

Most of cervical abrasion and erosion lesions show gingival margin where the cavosurface angle is on cementum or dentin. Composite resin restoration of cervical lesion shrink toward enamel margin due to polymerization contraction. This shrinkage has clinical problem such as microleakage and secondary caries. Several methods to diminish contraction stress of composite resin restoration, such as modifying cavity form and building up restorations in several increments have been attempted. The purpose of this study was to compare polymerization contraction stress of composite resin in Class V cavity subjected to cavity forms and placement methods. In this study, finite element model of 5 types of Class V cavity was developed on computer tomogram of maxillary central incisor. The types are : 1) Box cavity 2) Box cavity with incisal bevel 3) V shape cavity 4) V shape cavity with incisal bevel 5) Saucer shape cavity. The placement methods are 1) Incisal first oblique incremental curing 2) Bulk curing. An FEM based program for light activated polymerization is not available. For simulation of curing dynamics, time dependent transient thermal conduction analysis was conducted on each cavity and each placement method. For simulation of polymerization shrinkage, thermal stress analysis was performed with each cavity and each placement method. The time-temperature dependent volume shrinkage rate, elastic modulus, and Poisson's ratio were determined in thermal conduction data. The results were as follows : 1. With all five Class V cavifies, the highest Von Mises stress at the composite-tooth interface occurred at gingival margin. 2. With box cavity, V shape cavity and saucer cavity, Von Mises stress at gingival margin of V shape cavity was lower than the others. And that of box cavity was lower than that of saucer cavity. 3. Preparing bevel at incisal cavosurface margin decreased the rate of stress development in early polymerization stage. 4. Preparing bevel at incisal cavosurface margin of V shape cavity increased the Von Mises stress at gingival margin, but decreased at incisal margin. 5. At incisal margin, stress development by bulk curing method was rapid at early stage. Stress development by first increment of incremental curing method was also rapid but lower than that by bulk curing method, however after second increment curing final stress was the same for two placement methods. 6. At gingival margin, stress development by incremental curing method was suddenly rapid at early stage of second increment curing, but final stress was the same for two placement methods.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.97-105
• /
• 2018

PURPOSES : Asphalt concrete pavement is damaged by various causes such as traffic and environmental loads. The distressed pavement should be maintained by various methods to provide a comfortable and safe pavement for the driver. This study evaluates the effect of adding a mixing procedure to enhance the mixture quality in the hot in-placement recycled asphalt pavement method, which is an asphalt-pavement maintenance method. METHODS : Various test methods such as Marshall stability and dynamic stability, were employed to estimate the recycled asphalt mixture with and without an additional mixing, using the hot in-placement recycled asphalt pavement method. RESULTS : The mixture samples used in this study were taken before and after the addition of the mixer in the hot in-placement recycled asphalt pavement method (HIR) at field construction sites in GongJu and JinJu in South Korea. The test results of both mixtures satisfied the asphalt-mixture standard specifications. CONCLUSIONS : This study confirmed that adding a mixer in the HIR method results in a well-mixed new asphalt mixture, rejuvenator, and reclaimed asphalt mixture.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.421-431
• /
• 1999

NOD systems contain the data of multiple types such as text, image and video, and the size of NOD data depend on their data types. Therefore, in this paper, we propose a Data Placement Method based on Data Types(DPMDT), in which the data placement method depends on their type. Then, we analyze the performance of DPMDT with that of a Time Based Storage Management(TBSM) in which the data placement method depends on their created date, and that of Rate Based Storage Management(RBSM) in which the data placement method depends on their created date and accessed rate. In case of long playback of video news and a few disks(one disk), our results show that the performance of DPMDT is less efficient than that of TBSM and RBSM methods, however, in case of over 2 disks, the performance of DPMDT is more efficient than that of TBSM and RBSM methods.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.43-52
• /
• 2008

The paper presents the problem definition of video placement and efficient methods for placing video data on a cluster of video servers. The video placement is to place each of video replicas on one of the servers where the number and location of the servers are already determined. The rejection ratio of user requests is one of most important user-perceive performance measures, so it has been used as a performance criteria in many researches on the VOD system. The objective of our video placement is to achieve the load balancing among servers and the minimization of total network loads. To our experiment, the presented methods show better performance in terms of the rejection ratio of user requests than the methods for video placements in which only either server load balancing or network load minimization is considered. Also, it is observed that considerations on server load balancing is especially important in video placement. To our survey, little research has been published on video placement in which server and network load are considered together in a video server cluster environment.