• 한국실내디자인학회논문집
• /
• 제26권3호
• /
• pp.121-129
• /
• 2017

The study is to identify the status of the ward of public hospital for integrated nursing care service. Integrated nursing service has expanded nationwide from 2016 but 10 out of 34 public hospitals are currently unable to operate as nurses due to the shortage. Analyze each floor plan and space program of ward and provide the basic data for the construction of the architecture plans for Integrated nursing care service. For this study, selecting 14 wards of public hospital in Korea and then analyzes space organization, distance from NS to bedroom and NS to core(Elevator) and spatial hierarchy of them. Among the 14 public hospitals, there are 7 types of double-loaded corridor, 4 types of double corridor and 3 types of single corridor. If NS is placed centrally, the control of the outsider and the patient's control would be efficient, but most of NS are lean on one side of floor. the placement of NS should be independent of individual arrangements, but it should be smooth alignment with patient spaces, staff spaces, and public spaces. This study could serve as basic research for the architectural plan for future integrated nursing care in ward of public hospital.

• Journal of Periodontal and Implant Science
• /
• 제37권3호
• /
• pp.647-653
• /
• 2007

Rapid crestal bone resorption following maxillary tooth loss is further accentuated in the posterior regions because of pneumatization and enlargement of the maxillary sinuses. A treatment rationale that allows preservation and augmentation of vertical available bone at the time of posterior maxil-lary tooth extraction may offer numerous therapeutic benefits which are more short courses of ther-apy and no needs of additional surgical augmentation. The present study comprised 3 patients who had 4 posterior maxillary teeth with no evident bone between the tooth apex and sinus floor, as estimated through preoperative radiographic analysis. Sinus floor augmentation at the time of tooth extraction was chosen for the ltreatment of these patients. After the tooth was carefully extracted, the empty alveolus was thoroughly debrided and a trephine approach was performed. Particulated autogenous bone was gently pushed beyond the empty alveolus to elevate the sinus membrane using an osteotome. The distance between bone crest and si-nus floor was radiographically estimated 4 months after the first procedure. Another procedure was then carried out to place the implants of 11 mm length without another augmentation procedure. All implant were clinically stable, with no sign of infection. The presented surgical procedure performed at the time of extraction of posterior maxillary teeth in close proximity to the sinus floor allowed placement of implants of proper length.

• The Journal of Advanced Prosthodontics
• /
• 제3권1호
• /
• pp.47-50
• /
• 2011

Despite the greater retention and low maintenance of bar attachment system, the longer clinical time and increased number of visits were the assignments to overcome in bar attachment system. This case report describes SFI-Bar$^{(R)}$ (Cendres et Me$\'{e}$taux, Biel/Bienne, Switzerland) to be solve those problems. A 65-year-old female, who had severely absorbed mandible, hoped to wear a stable mandibular denture without pain. As soon as two implants were placed on mandible, a tube bar was connected to two adaptors connected to each implant. The length of the tube bar was adjusted considering inter implant distance, and reconnected to the adaptors. Finally a female part was seated beneath the denture. This case report showed that a satisfactory clinical result was achieved by delivering bar overdenture immediately after implant placement without laboratory procedure.

• 콘크리트학회논문집
• /
• 제16권2호
• /
• pp.283-291
• /
• 2004

Recently, the construction of underwater structures has been gradually increased, but underwater concrete got some problems of quality deterioration and water contamination around cast-in-situ of construction. In addition, massive underwater structures such as LNG tank, underwater concrete structures of large and continuous high- strength subterranean wall under water are being demanded lower heat of hydration. In this paper, the mechanical properties of high-strength antiwashout underwater concrete (HAWC) containing with two kinds of mineral admixtures respectively were investigated. On the basis of these results, the pH value and suspended solids of HAWC manufactured in the mock-up test were 10.0$\Box$11.0 and 51 mg/${\iota}$ at 30 minutes later, respectively, initial and final setting time were about 30,37 hours, and the slump flow was 530$\pm$20Tm. In the placement at a speed of $27 m^3/hr$, there was no large difference in flowing velocity with or without reinforcing bar, and flowing slope was maintained at horizontal level. Compressive strength and elastic modulus of the cored specimen somewhat decreased as flowing distance was far; however, those of central area showed the highest value.

• Imaging Science in Dentistry
• /
• 제44권2호
• /
• pp.129-135
• /
• 2014

Purpose: The objective of this study was to assess the trabecular bone changes that occurred around functional endosseous dental implants by means of radiographic image analysis techniques. Materials and Methods: Immediate preoperative and postoperative periapical radiographs of de-identified implant patients at the University Dental Hospital of Manchester were retrieved, screened for specific inclusion criteria, digitized, and quantified for structural elements of the trabecular bone around the endosseous implants, by using image analysis techniques. Data were analyzed using SPSS version 11.5. P values of less than 0.05 were considered statistically significant. Results: A total of 12 implants from 11 patients were selected for the study, and 26 regions of interest were obtained. There was a significant increase in the bone area in terms of the mean distance between nodes (p=0.006) and a significant decrease in the marrow area in terms of the bone area (p=0.006) and the length of marrow spaces (p=0.032). Conclusion: It appeared that the bone around the implant underwent remodeling that resulted in a net increase in bone after implant placement.

• 전자공학회논문지B
• /
• 제32B권5호
• /
• pp.720-729
• /
• 1995

We proposed a XMESH(crossed-mesh) topology as a suitable interconnection for the massively parallel computer architectures, and presented performance analysis of the proposed interconnection topology. Horizontally, the XMESH has the same links as those of the toroidal mesh(TMESH) or toroid, but vertically, it has diagonal cross links instead of the vertical links. It reveals desirable interconnection characteristics for the massively parallel computers as the number of nodes increases, while retaining the same structural advantages of the TMESH such as the symmetric structure, periodic placement of subsystems, and constant degree, which are highly recommended features for VLSI/WSI implementations. Furthermore, n*k XMESH can be easily expanded without increasing the diameter as long as n.leq.k.leq.n+4. Analytical performance evaluations show that the XMESH has a shorter diameter, a shorter mean internode distance, and a higher message completion rate than the TMESH or the diagonal mesh(DMESH). To confirm these results, an optimal self-routing algorithm for the proposed topology is developed and is used to simulate the average delay, the maximum delay, and the throughput in the presence of contention. In all cases, the XMESH is shown to outperform the TMESH and the DMESH regardless of the communication load conditions or the number of nodes of the networks, and can provide an attractive alternative to those networks in implementing massively parallel computers.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권2호
• /
• pp.96-101
• /
• 2016

The thermal management of high-power LED components in an assembly structure is crucial for the stable operation and proper luminous function. This study employs numerical tools to determine the optimum thermal design in LEDs with a heat sink consisting of a crevice-type vapor-chamber heat pipe. The effects of the MCPCB are investigated in terms of the substrate thicknesses on which the LEDs are mounted. Further, different placement configurations in a system module are considered. This study found that for a confined area, a power of 40 W/LED is applicable to a high-power package. Furthermore, the thermal conductivity of dielectric layer materials should ideally be greater than 0.9 W/m.K. The temperature conditions of the vapor chamber in a heat pipe greatly affect the thermal performance of the system. At an offset distance of 9.0 mm and a $2^{\circ}C$ increase in the temperature of the heat pipe, the resulting maximum temperature increase is approximately $1.9^{\circ}C$ for each heat dissipation temperature. Finally, at a thermal conductivity of 0.3 W/m.K, it was found that the total thermal resistance changes dramatically. Above 1.2 W/m.K, the resistance change reduces exponentially.

• 한국산업융합학회 논문집
• /
• 제17권3호
• /
• pp.151-169
• /
• 2014

We propose a new technique for autonomous navigation and travelling of mobile robot based on ultrasonic sensors through the narrow labyrinth that leave only distance of a few centimeters on each side between the guides and the robot. In our current implementation the ultrasonic sensor system fires at a rate of 100 ms, that is, each of the 8 sensors fires once during each 100 ms interval. This is a very good firing rate, implemented here for optimal performance. This paper presents an extensively tested and verified solution to the problem of obstacle avoidance. Our solution is based on the optimal placement of ultrasonic sensors at strategic locations around the robot. Both the sensor location and the associated navigation algorithm are defined in such a way that only the accurate radial sonar data is used for accurate travelling.

• 한국주거학회논문집
• /
• 제14권6호
• /
• pp.59-67
• /
• 2003

The development of science technology and high growth of economy have influenced on the change of living environment and have changed people's way of thinking and behavior. Also, apartments has appeared to solve the shortage of housing in cities. This study has a thorough grasp about problems of juvenile playground in the apartments and comes the following conclusion as a result that all sorts of details for amusement behavior have been analyzed. First, juvenile playground should be harmonized with nature, and needs a construction of amusement place that include fixed amusement facilities. Second, for a constitution of dynamic amusement place, a school playground should be opened in the public and parking lots should be utilized for dynamic amusement place in a different time. Third, juvenile playground should be classified by age, especially infant amusement facilities should be installed where a landscape architecture has placed between buildings. Also a daylight should be shined into the place, under considering the installation of bench for parents and rest space. Fourth, a location of amusement place is needed a careful consideration of the environment and building placement, in addition that suitable distance should be set up for children to come into contact easily. Fifth, insufficient things should be complemented as compared with the standards of foreign amusement facilities and guideline should be suggested for maintenance and management of amusement place.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.62-65
• /
• 2003

When a mobile robot moves around autonomously without man-made corrupted bye landmarks, it is essential to recognize the placement of surrounding objects especially for self localization, obstacle avoidance, and target classification and localization. To recognize the environment we use many Kinds of sensors, such as ultrasonic sensors, laser range finder, CCD camera, and so on. Among the sensors, ultra sonic sensors(sonar)are unexpensive and easy to use. In this paper, we analyze the sonar data and propose a method to recognize features of indoor environment. It is supposed that the environments are consisted of features of planes, edges, and corners, For the analysis, sonar data of plane, edge, and corner are accumulated for several given ranges. The data are filtered to eliminate some noise using the Kalman filter algorithm. Then, the data for each feature are compared each other to extract the character is ties of each feature. We demonstrate the applicability of the proposed method using the sonar data obtained form a sonar transducer rotating and scanning the range information around a indoor environment.