• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.477-482
• /
• 2001

To realize higher track density of HDD, the servo bandwidth should be higher, however, is limited by the mechanical resonances of the arm, coil of the VCM and ball bearing pivot. The dual-stage actuator systems have been suggested as a possible solution. For the dual-stage actuator systems based on the suspension, the suspension resonance frequencies in the radial access direction are important factors to increase a servo bandwidth, however the improvement of these frequencies may affect the shock resistance performance and spring constant. The slider's flying stability can be deteriorated by the change of a vertical stiffness. In this work, we have investigated a suspension design scheme possessing a milliactuator for dual-stage actuator systems and also achieved higher mechanical characteristics. Design parameters are deduced by finite element analysis with sensitivity function. It is confirmed that the proposed suspension with the milliactuator has the capability of fine tracking motion, due to its hinge structure on the spring region, and achieves higher mechanical resonance frequencies in the radial access direction with a high-shock resistance and a low-spring constant.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.6
• /
• pp.974-980
• /
• 2008

Generally. most of the physical systems affected by disturbance or incomplete knowledge are complex and highly nonlinear. To control under these circumstances. many researches are ongoing in modern control theory recently. But the researches need apparatuses. which can verify the controller for being not damaged the real plant. In this paper. therefore. a seesaw system is considered control system to analyze and apply the control theory. A seesaw system consists of a moving cart on the rail and seesaw frame made to demonstrate the effectiveness of the control theory. The system has balancing and positioning problems. and the driving force is applied on the DC motor of cart. but not on the pivot. The purpose of control is to maintain an equilibrium of seesaw frame in spite of an allowable disturbance. Computer simulations are given to illustrate the control performance of the proposed scheme.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1111-1116
• /
• 2001

A transient T-F(time-frequency) signal processing technique is applied to a tilt drop and a linear shock test rigs for identification of shock characteristics of hard disk drive (HDD). The T-F technique essentially tracks the shock characteristics of pivot point response as well as head slap and lift-off phenomena. From the T-F analysis result, the shock characteristic in HDD is modeled by the two degree of freedom coupled-dynamic system, which consists of actuator arm and suspension. As shock designing tool, the maximax shock response spectrum is employed for prediction of shock performance. Finally, the shock control technique is tested with newly designed actuator arm and suspension. Experimental head slap test result shows that the shock performance is much higher with the new shockproof designed model than the current model

• Annual Conference on Human and Language Technology
• /
• 1996.10a
• /
• pp.329-337
• /
• 1996

일-한 기계 번역을 연구하는 많은 연구자들은 양국어의 문절-어절 단위의 어순 일치와 같은 구조적 유사성을 최대한 이용하기 위해 직접 번역 방식을 채택하고 있다. 그러나, 일본어와 한국어 술부간에는 대응하는 품사의 불일치 및 국부적인 어순의 불일치 등이 어려운 문제로 남아 있다. 본 논문에서는 이들 술부 표현의 불일치를 해결하기 위해 이미 제안하였던 "양상 테이블을 기반으로 한 한국어 술부의 생성 방법"에 대해 좀더 체계적인 평가를 하고자 한다. 이 방법은 술부만을 대상으로 하는 추상적이고 의미 기호적인 양상 자질(modality feature)을 테이블화(양상 테이블)하여, 양국어의 술부 표현의 피봇(pivot)으로 이용함으로써 술부 양상 표현의 효과적인 번역을 가능하게 하였다. 일본어 499 문을 대상으로 실제 술부의 번역처리를 시행해 본 결과, 약 97.7%가 자연스럽게 번역됨을 확인하였다. 특히, 술부의 생성 부분은 일본어에 의존하지 않는 양상 테이블을 도입함으로써 일-한뿐만 아니라 다른 언어로부터의 한국어 술부 생성에도 적용시킬 수 있을 것이다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.2 no.2
• /
• pp.93-103
• /
• 1979

As principles of our country's Business Enterprises Account are being developed, Customs of Business Enterprises Account are in the state of change and then Principles of that are in revision. According to systematizing contents of such a principle of Business Enterprises Account, having made an analysis and Investigation from versatile situation, I can deprive of the following conclusions from above facts. 1. The prelude of a general principle involves compulosory character like a forced law rather than a theoretical teaching of original character. 2. Because of making much of supply of account information, To make mistakes, emphasis on function of an information, on the other side, being apt to disregard control function of original account. 3. There is no such a mutual relation as theoretical systematic form among general rule, a profit-and-loss account, balance sheet and drawing principle. These rules which don't form gradual structure are prescribed respectively according to business like necessity. 4. An overall contents of account principle are regarded as principle near financial account rather than the Pivot of administration account. In the future, The whole academic world of account and business practice should become the idealistic account principle with lots of study and effort.

• The Journal of Korean Physical Therapy
• /
• v.21 no.3
• /
• pp.119-124
• /
• 2009

Purpose: The National Institute for Occupational Safety and Health (NIOSH) lifting equation (NLE) is a useful tool to ergonomically analyze a workload. The NLE has high reliability and it can assess tasks by analyzing the work process. The purpose of this case study was to try using the NLE to analyze the workload of transferring patients by physical therapists in the hospital setting. Methods: We observed a physical therapist (PT) transferring patients from a wheelchair to a tilt table and a therapeutic table in one day. Two types of patient transferring methods were evaluated; (1) the manual single person method of stand, pivot and transfer, and (2) manual two person lifting under the thigh and grasping the waist for totally dependent patients. Results: The NIOSH lifting indexes of a person grasping the waist during the manual two person lifting were 5.52~4.48 according to the patient's weight. The NIOSH lifting indexes were 3.34 and 4.48 for the tasks performed by the manual single person method. Conclusion: Because transferring patients is not done very frequently, patients transferring tasks by a PT are not included as one of the musculoskeletal disorder related risky work criteria of the Korea Ministry of Labor. But the NIOSH lifting indexes of a person grasping the waist during the manual two person lifting and the manual single person method were over the NIOSH recommended weight limit threshold.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.95-100
• /
• 2002

Built-in Eccentric Bearing-Torsional Spring (BEBTS) type Automatic Belt Tension Unit (ABTU) is one of typical belt tension units. The BEBTS type ABTU system frequently experiences torsional vibration about its pivot due to the variation of belt tension. However, it is very difficult to analyze the rotational (or torsional) vibration of the ABTU because the exciting moment varies according to the change of belt tension. To get over this difficulty, in this paper. the ABTU was simplified as 1-DOF translational motion model in the tangential direction. Its equation of motion was derived and solved. The time history and frequency responses were computed and examined for three of BEBTS type ABTUs which are made by different manufacturers but the tame kind.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.4
• /
• pp.133-140
• /
• 2017

Recently, the interest in the smart buildings is increasing in the architecture field. Among them, a research of facade design using a transformable system that can adjust the effect of the external environment is in progress. One of a typical example of the deployable system is a Scissors system that can change shape by using the geometric conditions of a unit member. Scissors system is a high-tech structural system which can construct the deployable plan and curved space by using the SLE (Scissors-Like Element) consisted of two Bar and Pivot. If the facade is designed by applying Scissors system, it is possible to maximize the performance and aesthetic effect of the structure by using a shape change of the line member. This paper presents a study of deployable facade design applying hybrid-typed Scissors system. A new deployable pattern of facade design is developed by combining Angulated Scissors system and tessellation pattern. Applying the deployable pattern a double skin construction method which is to add an outer wall for design, it raises three dimensional effects and can maximize the artistic essence of the change in shape upon deployment.

• Journal of Mechanical Science and Technology
• /
• v.17 no.5
• /
• pp.679-690
• /
• 2003

As the rate of increase in areal density of the HDD has accelerated, dynamic characteristics of the HDD actuator need to be improved with respect to the performance of the tracking servo and shock transmission. Therefore, it is important to analyze the vibration characteristic of the HDD actuator that consists of the VCM part, E-block and pivot bearing. In this paper, vibration modes of the HDD actuator are investigated the using finite element and experimental modal analyses methods. To develop a detailed finite element model, finite element models of each components of the actuator assembly are constructed and tuned to the results of the EMA. The VCM coil is modeled as an equivalent finite element model that has an orthotropic material property using auto-model updating program. Auto-model updating program with improved sensitivity based iterative method is applied to build a detailed finite element model using the result of the EMA. A detailed finite element model of the HDD actuator is then constructed and analyzed.

• Journal of the Korean Arthroscopy Society
• /
• v.1 no.1
• /
• pp.123-127
• /
• 1997

Arthroscopic anterior cruciate ligament reconstructions using bone-patella tendon-bone have been considered the best method by which others are compared. The notchyplasty is one of the important steps of this procedure and it is emphasized recently to prevent retear of the reconstructed ACL caused by impingement. However, until now, there is controversy about adequate amount of notchyplasty. Also, it is hard to examine the adequacy of notchyplasty even in the arthroscopic field, The purpose of this paper is to describe the surgical technique of notchyplasty, using the flexible reamer and preliminary result of its operation. In this study the results of ACL reconstruction with notchyplasty which is made by us were analized from January. 1994 to December, 1995. The results were as follows: 1. The notchyplasty with flexible reamer is the method that can be obtained adequate amount of removal, perfectly smooth notchyplasty. 2. The range of motion of the affected knee joint was normal ROM after post operation 6 month. 3. In the last follow up, 2 cases were positive in anterior drawer test 4 cases were positive in Lachmann's test and 1 knee was positive in Pivot shift test 4. Average Lysholm knee scoring scale was 70 points at preoperative and 92 points at the last follow up.