• 제목/요약/키워드: Pitch link

검색결과 34건 처리시간 0.027초

무베어링 헬리콥터 주 로터의 허브 파라미터 변화에 따른 로터 안정성 특성 해석 (Hub Parametric Investigation of Main Rotor Stability of Bearingless Helicopter)

  • 윤철용;기영중;김태주;김덕관;김승호
    • 한국소음진동공학회논문집
    • /
    • 제22권8호
    • /
    • pp.784-790
    • /
    • 2012
  • This paper describes a stability and dynamic characteristics of bearingless helicopter main rotor in hover. Baseline rotor configuration is defined and modal analysis for the configuration is taken to verify the dynamic characteristics. The kinematic pitch-lag couplings through ways of pitch link installation are analyzed to know effects on loads, frequencies and stability. The effects of pitch link attachments in spanwise direction and chordwise direction as well as pitch link inclination on thrust, power, flpa-lag-pitch mode frequencies and inplane damping are examined. Pitch link at trailing edge location in chordwise direction has influence on aeroelastic stability of the rotor. Also, the pitch link with negative inclination angle makes inplane damping increase.

무베어링 헬리콥터 주 로터의 허브 파라미터 변화에 따른 로터 안정성 특성 해석 (Hub Parametric Investigation of Main Rotor Stability of Bearingless Helicopter)

  • 윤철용;기영중;김태주;김덕관;김승호
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2012년도 춘계학술대회 논문집
    • /
    • pp.394-399
    • /
    • 2012
  • This paper describes a stability and dynamic characteristics of bearingless helicopter main rotor in hover. Baseline rotor configuration is defined and modal analysis for the configuration is taken to verify the dynamic characteristics. The kinematic pitch-lag couplings through ways of pitch link installation are analyzed to know effects on loads, frequencies and stability. The effects of pitch link attachments in spanwise direction and chordwise direction as well as pitch link inclination on thrust, power, flpa-lag-pitch mode frequencies and inplane damping are examined. Pitch link at trailing edge location in chordwise direction has influence on aeroelastic stability of the rotor. Also, the pitch link with negative inclination angle makes inplane damping increase.

  • PDF

한국인 영어학습자의 지각 모음공간과 발화 모음공간의 연계 (A Link between Perceived and Produced Vowel Spaces of Korean Learners of English)

  • 양병곤
    • 말소리와 음성과학
    • /
    • 제6권3호
    • /
    • pp.81-89
    • /
    • 2014
  • Korean English learners tend to have difficulty perceiving and producing English vowels. The purpose of this study is to examine a link between perceived and produced vowel spaces of Korean learners of English. Sixteen Korean male and female participants perceived two sets of English synthetic vowels on a computer monitor and rated their naturalness. The same participants produced English vowels in a carrier sentence with high and low pitch variation in a clear speaking mode. The author compared the perceived and produced vowel spaces in terms of the pitch and gender variables. Results showed that the perceived vowel spaces were not significantly different in either variables. Korean learners perceived the vowels similarly. They did not differentiate the tense-lax vowel pairs nor the low vowels. Secondly, the produced vowel spaces of the male and female groups showed a 25% difference which may have come from their physiological differences in the vocal tract length. Thirdly, the comparison of the perceived and produced vowel spaces revealed that although the vowel space patterns of the Korean male and female learners appeared similar, which may lead to a relative link between perception and production, statistical differences existed in some vowels because of the acoustical properties of the synthetic vowels, which may lead to an independent link. The author concluded that any comparison between the perceived and produced vowel space of nonnative speakers should be made cautiously. Further studies would be desirable to examine how Koreans would perceive different sets of synthetic vowels.

영어 정보구조에서의 화제에 대한 억양 연구 (A Study on Intonation of the Topic in English Information Structure)

  • 이용재;김화영
    • 음성과학
    • /
    • 제13권2호
    • /
    • pp.87-105
    • /
    • 2006
  • Many researchers have studied the relationship between the information structure and intonation. Arguments about the relations between the information structure and intonation researched so far can be summarized as follows: the intonation of topic and focus in English information structure is represented as i) a pitch accent, ii) a tune (a pitch accent + an edge tone), or iii) a boundary tone. The purpose of this paper is to study various informational patterns of the topic in English information structure, using real TV discussion data. In this paper, the topic is classified as contrastive topics and non-contrastive topics, based on contrastiveness. The results show that the intonation of the topic in English information structure is implemented as a pitch accent, neither a tune nor a boundary tone. Of the non-contrastive topics, while anaphoric determinative NP topics (Lnc, Lncd) are mainly represented as a H* pitch accent, the pronoun topic(Lp) does not have a pitch accent. Of contrastive topics, while the semantically focused topic(Lci) is mainly represented as a H* pitch accent, the contrastively focused topic(Lcc) is represented as both H* and L+H* pitch accents. It shows that it is not always true that the topic or focus to have the meaning of contrast is represented as a L+H* pitch accent as argued in the previous researches.

  • PDF

가변 풍력발전 시스템의 최대출력 제어를 위한 Fuzzy 제어기 설계 (A Fuzzy Logic Controller Design for Maximum Power Extraction of Variable Speed Wind Energy Conversion System)

  • 김재곤;허욱열;김병륜
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제53권11호
    • /
    • pp.753-759
    • /
    • 2004
  • This paper presents a modeling and simulation of a fuzzy controller for maximum power extraction of a grid-connected wind energy conversion system with a link of a rectifier and an inverter. It discusses the maximum power control algorithm for a wind turbine and proposes, in a graphical form, the relationships of wind turbine output, rotor speed, power coefficient, tip-speed ratio with wind speed when the wind turbine is operated under the maximum power control. The control objective is to always extract maximum power from wind and transfer the power to the utility by controlling both the pitch angle of the wind turbine blades and the inverter firing angle. Pitch control method is mechanically complicated, but the control performance is better than that of the stall regulation method. The simulation results performed on MATLAB will show the variation of generator's rotor angle and rotor speed, pitch angle, and generator output.

계통연계 풍력발전 시스템의 최대출력 제어를 위한 PI 제어기의 성능 분석 (Performance of PI Controller for Maximum Power Extraction of a Grid-Connected Wind Energy Conversion System)

  • 노경수;류행수
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제51권8호
    • /
    • pp.391-397
    • /
    • 2002
  • This paper presents a modeling and simulation of a PI controller for maximum power extraction of a grid-connected wind energy conversion system with a link of a rectifier and an inverter. It discusses the maximum power control algorithm fnr a wind turbine and proposes, in a graphical form, the relationships of wind turbine output, rotor speed, power coefficient, tip-speed ratio with wind speed when the wind turbine is operated under the maximum power control. The control objective is to always extract maximum power from wind and transfer the power to the utility by controlling both the Pitch angle of the wind turbine blades and the inverter firing angle. Pitch control method is mechanically complicated, but the control performance is better than that of the stall regulation method. The simulation results performed on MATLAB will show the variation of generator's rotor angle and rotor speed, pitch angle, and generator output.

비원형기어를 이용한 부등속 회전기구의 설계 변수에 관한 연구 (Determination of Designing Condition for a Velocity of Inequality Rotatonal Equipment with Non-Circular Gears.)

  • 차철웅;최상훈
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 추계학술대회 논문집
    • /
    • pp.861-866
    • /
    • 1996
  • The Non-Circular Gears is more advantage than other machinery using link and cam in the automation equipment. We designed Non-Circular Gears for a velocity of inequalty rotational equipment according to the variation of pressure angle, radius of curvature etc., and studied about pitch curve.

  • PDF

선 기하학을 이용한 5-SS 멀티 링크 현가장치의 순간 스크류 축 해석 (Analysis of Instantaneous Screw Axis in 5-SS Multi-link Suspensions Using Line Geometry)

  • 최재성;심재경
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 추계학술대회논문집A
    • /
    • pp.635-640
    • /
    • 2000
  • This paper presents the analysis method of the instantaneous screw axis using line geometry in bump and rebound motion of 5-SS multi-link suspensions. Instantaneous screw axis is based on screw motion, and screw motion of zero pitch can be expressed as $Pl{\ddot{u}}cker$ line coordinates of line geometry instead of screw coordinates. In screw coordinates, twist and wrench are described by components of instantaneous screw axis. For instantaneous motion of wheel assembly, the principle of virtual work with twist and wrench is applied to 5-SS multi-link suspension, and it makes 5 linear equations. Therefore, it is possible to find instantaneous screw axis by solving these equations. This analysis by line geometry demands geometric values only, such as the locations of spherical joints in the case of multi-link suspensions.

  • PDF

개별 블레이드 조종을 통한 로터 허브 진동 저감 해석 (Rotor Hub Vibration Reduction Analysis Applying Individual Blade Control)

  • 김태주;위성용;김민우;이동건
    • 한국항공우주학회지
    • /
    • 제49권8호
    • /
    • pp.649-660
    • /
    • 2021
  • S -76 모델을 기준으로 해석을 통해 개별 블레이드에 대한 고조화 가진에 따른 로터 허브 진동 수준을 분석하였다. 개별 블레이드에 대한 고조화 가진 방법은 회전부에 있는 피치링크 자체에서 추가적인 가진력을 발생하는 방법(Actuating by Individual Pitch-link)과 블레이드 능동 뒷전 플랩조절을 통해 가진력을 발생하는 방법(Active Trailing Edge Flap)으로 구분하였다. 100kts의 전진비행 조건에서 개별 블레이드에 대한 2P/3P/4P/5P 조화 가진을 15도의 위상각을 변경시켜가며 허브 하중 해석을 수행하였다. 그 결과를 통해 가진 조건에 따른 로터 시스템의 민감도를 확인하였으며 이 정보를 기반으로 로터 시스템의 특성을 나타내는 전달 행렬(T-matrix)을 구성하였다. 그리고 전달 행렬을 통해 비행조건에 대해 허브 진동 수준을 최소화하는 최적의 고조화 가진 조건을 도출하였다. 그리고 최소 허브 진동 조건에서 로터 시스템의 성능 및 피치링크 하중에 대한 영향성과 더불어 소음해석을 통한 소음 영향성도 확인하였다.

동특성해석을 위한 계통연계 풍력발전 시스템의 모델링 (Modeling of a Grid-Connected Wind Energy Conversion System for Dynamic Performance Analysis)

  • 추연식;노경수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 B
    • /
    • pp.1358-1360
    • /
    • 2002
  • This paper presents a modeling and simulation of a utility-connected wind energy conversion system with a link of a rectifier and an inverter. It discusses the maximum power control algorithm for the wind turbine and presents the relationship of wind turbine output, rotor speed, power coefficient, tip-speed ratio and wind speed when the wind turbine is operated under the maximum power control algorithm. The control objective is to extract maximum power from wind and transfer the power to the utility. This is achieved by controlling the pitch angle of the wind turbine blades. Pitch control method is mechanically complicated, but the control performance is better than that of the stall regulation method. The simulation results performed on MATLAB will show the variation of generator's rotor speed, pitch angle, and generator output.

  • PDF