• The Journal of the Acoustical Society of Korea
• /
• v.31 no.1
• /
• pp.39-50
• /
• 2012

A voice transformation (VT) method that can make the utterance of a source speaker mimic that of a target speaker is described. Speaker individuality transformation is achieved by altering three feature parameters, which include the LPC cepstrum, pitch period and gain. The main objective of this study involves construction of an optimal sequence of features selected from a target speaker's database, to maximize both the correlation probabilities between the transformed and the source features and the likelihood of the transformed features with respect to the target model. A set of two-pass conversion rules is proposed, where the feature parameters are first selected from a database then the optimal sequence of the feature parameters is then constructed in the second pass. The conversion rules were developed using a statistical approach that employed a maximum likelihood criterion. In constructing an optimal sequence of the features, a hidden Markov model (HMM) was employed to find the most likely combination of the features with respect to the target speaker's model. The effectiveness of the proposed transformation method was evaluated using objective tests and informal listening tests. We confirmed that the proposed method leads to perceptually more preferred results, compared with the conventional methods.

• Journal of Korea Multimedia Society
• /
• v.14 no.11
• /
• pp.1507-1515
• /
• 2011

As the first step in research for sound synthesis of Pyungjong, timbre was analyzed by FFT analysis. There was no significant difference in the pitch of scale between modern Pyungjong and western twelve-tone equal temperament scale. The timbre of Pyunjong chagnes over time. When striking Pyunjong, the noises to be generated across all frequencies will disappear in a short period of time, and a unique partial only is left. Then it disappear from the partial of high frequency components in order, and two partials remain at release time. At this time, the beating is occurring by the frequency of the remaining partial. Pyungjong used in this study is relatively a recently manufactured Pyungjong, and for original sound synthesis of Pyungjong, a study of ancient Pyungjong's timbre should be additionally conducted later.

• Speech Sciences
• /
• v.7 no.2
• /
• pp.19-35
• /
• 2000

Speech evaluation and treatment planning for the patients with articulation disorders have traditionally been based on perceptual judgement by speech pathologists. Recently, various computerized speech analysis systems have been developed and commonly used in clinical settings to obtain the objective and quantitative data and specific treatment strategies. 10 dysarthric children (6 neurogenic and 4 functional dysarthria) participated in this experiment. Speech evaluation of dysarthria was performed in two ways; first, the acoustic analysis by Visi-Pitch and a Computerized Speech Lab and second, the perceptual scoring of phonetic errors rates in 100 word test. The results of the initial evaluation served as primary guidlines for the indivisualized treatment planning of each patient's speech problems. After mean treatment period of 5 months, the follow-up data of both dysarthric groups showed increased maximum phonation time, increased alternative motion rate and decreased occurrence of articulatory deviation. The changes of acoustic data and therapeutic effects were more prominent in children with dysarthria due to neurologic causes than with functional dysarthria. Three cases including their pre- and post treatment data were illustrated in detail.

• International Journal of Ocean System Engineering
• /
• v.4 no.1
• /
• pp.19-28
• /
• 2014

The tension leg platform (TLP) is a vertically moored structure with excess buoyancy. The TLP is regarded as moored structure in horizontal plan, while inherit stiffness of fixed platform in vertical plane. In this paper, a numerical study using modified Morison equation was carried out in the time domain to investigate the influence of nonlinearities due to hydrodynamic forces and the coupling effect between surge, sway, heave, roll, pitch and yaw degrees of freedom on the dynamic behavior of TLP's. The stiffness of the TLP was derived from a combination of hydrostatic restoring forces and restoring forces due to cables and the nonlinear equations of motion were solved utilizing Newmark's beta integration scheme. The effect of tethers length and wave characteristics such as wave period and wave height on the response of TLP's was evaluated. Only uni-directional waves in the surge direction was considered in the analysis. It was found that for short wave periods (i.e. 10 sec.), the surge response consisted of small amplitude oscillations about a displaced position that is significantly dependent on tether length, wave height; whereas for longer wave periods, the surge response showed high amplitude oscillations about that is significantly dependent on tether length.

• Journal of computational fluids engineering
• /
• v.11 no.4 s.35
• /
• pp.1-8
• /
• 2006

Clocking effects of a stator on the performance and internal flow in an UTRC 1.5 stage axial turbine are investigated using a three-dimensional unsteady flow simulation. Six relative positions of two rows of stator are investigated by positioning the second stator being clocked in a step of 1/6 pitch. The relative efficiency benefit of about 1% is obtained depending on the clocking positions. However, internal flows have some different characteristics from that in the previous study at the best and worst efficiency positions, since the first stator wake is mixed out with the rotor wake before arriving at the leading edge of the second stator. Instead of the first stator wake, it is found that the wake interaction of the first stator and rotor has a important role on a relative efficiency variation at each clocking position. The time-averaged local efficiency along the span at the maximum efficiency is more uniform than that at the minimum efficiency. That is, the spanwise efficiency distribution at the minimum efficiency has larger values in mid-span but smaller values near the hub and casing in comparison to those at the maximum efficiency. Moreover, the difference between maximum and minimum instantaneous efficiencies during one period is found to be smaller at the maximum efficiency than at the minimum efficiency.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.1
• /
• pp.51-57
• /
• 2007

In process of reinforced concrete (RC) box structure. the heat of hydration may cause serious thermal cracking. In order to eliminate hydration heat of mass concrete. this paper reports results of hydration heat control in mass concrete structure using the pulsating heat pipe. There were three RC box molds($1.2{\times}l.8{\times}2.4m^3$) which shows a difference as compared with each other. One was not equipped with pulsating heat pipe. The others were equipped with pulsating heat pipe. All of them were cooled with natural air convection. The pulsating heat pipe was composed of serpentine type copper pipe with 10 turns (outer diameter: 4mm. inner diameter: 2.8mm). The working fluid was R-22 and its charging ratio was 40% by volume. The conditions such as the number of turns. the length and the pitch of the pulsating heat pipe and the size of concrete structure were changed. Based on these experiments, it was confirmed that this construction method using pulsating heat pipe was effective to remove hydration heat of mass concrete structure and thus it was possible to prevent harmful thermal crack and construction Period and costs of concrete structure would be cut down.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.42-47
• /
• 2001

This paper improves the performance of VAD (Voice Activity Detector) in G.723.1 Annex A 6.3kbps/5.3kbps dual rate speech coder, which is developed for Internet Phone and videoconferencing. The VAD decision is based on a three-level energy threshold. We evaluates for processing time, speech quality, and bit rate. The processing time is reduced due to the accuracy of VAD decision on the silence period. On subjective quality test there is almost no difference compared with the G.723.1. In order to measure the bit rate we count the active speech frame (VAD=1) and we can reduce more bit rate as silence periods are shown.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.61-70
• /
• 2003

In this paper, a transcoding algorithm for the Selectable Mode Vocoder (SMV) and the G.723.1 speech coder via direct parameter transformation is proposed. In contrast to the conventional tandem transcoding algorithm, the proposed algorithm converts the parameters of one coder to the other without going through the decoding and encoding process. The proposed algorithm is composed of four parts: the parameter decoding, line spectral pair (LSP) conversion, pitch period conversion, excitation conversion and rate selection. The evaluation results show that the proposed algorithm achieves equivalent speech quality to that of tandem transcoding with reduced computational complexity and delay.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.473-480
• /
• 2005

Clocking effects of a stator on the performance and internal flow in an UTRC 1.5 stage axial turbine are investigated using a three-dimensional unsteady flow simulation. Six relative positions of two rows of stator are investigated by positioning the second stator being clocked in a step of 1/6 pitch. The relative efficiency benefit of about 1% is obtained depending on the clocking positions. However, internal flows have some different characteristics from that in the previous study at the best and worst efficiency positions, since be first stator wake is mixed out with the rotor wake before arriving at the leading edge of the second stator. Instead of the first stator wake, it is found that the wake interaction of the first stator and rotor has a important role on a relative efficiency variation at each clocking position. The time-averaged local efficiency along the span at the maximum efficiency is more uniform than that at the minimum efficiency. That is, the spanwise efficiency distribution at the minimum efficiency has larger values in mid-span but smaller values near the hub and casing in comparison to those at the maximum efficiency. Moreover, the difference between maximum and minimum instantaneous efficiencies during one period is found to be smaller at the maximum efficiency than at the minimum efficiency.

• Coupled systems mechanics
• /
• v.1 no.3
• /
• pp.247-268
• /
• 2012

A finite element model is developed for dynamic response prediction of floating offshore wind turbine systems considering coupling of wind turbine, floater and mooring system. The model employs Morison's equation with Srinivasan's model for hydrodynamic force and a non-hydrostatic model for restoring force. It is observed that for estimation of restoring force of a small floater, simple hydrostatic model underestimates the heave response after the resonance peak, while non-hydrostatic model shows good agreement with experiment. The developed model is used to discuss influence of heave plates and modeling of mooring system on floater response. Heave plates are found to influence heave response by shifting the resonance peak to longer period, while response after resonance is unaffected. The applicability of simplified linear modeling of mooring system is investigated using nonlinear model for Catenary and Tension Legged mooring. The linear model is found to provide good agreement with nonlinear model for Tension Leg mooring while it overestimates the surge response for Catenary mooring system. Floater response characteristics under different wave directions for the two types of mooring system are similar in all six modes but heave, pitch and roll amplitudes is negligible in tension leg due to high restraint. The reduced amplitude shall lead to reduction in wind turbine loads.