• 펄프종이기술
• /
• 제42권3호
• /
• pp.1-6
• /
• 2010

A new testing method named pitch deposit tester (PDT) was developed by KRICT in order to evaluate the deposit potential of micro-stickies. The new method involves depositing the potential pitch particles on the air bubble covered plastic film set in the pitch deposit tester (PDT) and analysing the deposited area by an image analyzer. In this study, the effect of fixing agents on potential pitch deposition was elucidated. The effects of some fixing agents (polyamine and polyethyleneimine) on pitch control were investigated by the PDT test of 100% recycled newsprint stock. The study suggested that proper use of the PEI can lead to better pitch control than that of polyamine. The efficiency of novel screening method using the PDT and retention and drainage analyser (RDA) for fixing agents in terms of retention and deposit contamination could be confirmed by above mentioned results.

• 펄프종이기술
• /
• 제41권2호
• /
• pp.26-33
• /
• 2009

A new testing method to evaluate the deposition potential of white pitch was developed. The new method involves depositing the potential white pitch particles on the air bubble covered plastic film in the pitch deposit tester (PDT) developed by KRICT and analysing the deposited area of white pitch using an image analyzer. In addition, the effect of two important factors (pH and calcium hardness) on white pitch deposition potential was elucidated. When pH of the coated broke stock was increased from neutral to alkali or the calcium hardness of the stock was decreased, the pitch deposit area was decreased, implying that these two factors have to be controlled during the evaluation of pitch deposition potential. It was found that hydrophobicity of the surface of latex binding films repulped is a key factor influencing white pitch deposition.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 추계학술발표회 논문집
• /
• pp.39-41
• /
• 2011

The recycling rate of recovered paper in Korea is the highest in the world, 92%, but remanufacturing yield is low due to the extremely poor quality of the paper. The poor quality, in turn, influences to the reject amount in deinking process. To increase the yield of old newspaper recycling process, hydrophobic degree of inorganic pigments of deinking stock must be reduced. To determine the hydrophobicity, Pitch Potential Deposit Tester (PDT) was newly designed and applied with respect to the SB latex property of various quality used in Korea; its hydrophobic degree according to Tg, gel content, charge and particle size of latex and optimum designing condition of SB latex. And below are the conclusions: 1. The reason of excessive reject from old newspaper deinking process for total amount of printed ink is loss of inorganic pigments. When lipase, a biochemical catalyst, was applied with the purpose of preventing inorganic pigments loss about more than 70% of total reject weight and promoting hydration of pulp for deinking, deinking process yield of pre flotation secondary stage increased remarkably without any changes of deinking efficiency. 2. Lipase improved deinking stock by cutting ester linkage on surface of hydrophobic materials to promote its hydration. From this, it reached the conclusion that hydration degree of stock exercises significant effect on flotation deinking process yield. 3. Inorganic alkali promotes hydration of deinking stock. But there have been needs for more fundamental measures other than inorganic alkali of promoting hydration for yield improvement. For this, this study intended to find out reasons of chemical properties change on surface of hydrophobic material by change of pH. 4. Pitch Deposit Test (PDT) was performed for understanding principle of why surface of coating flake from OMG is hydrophobic and why it becomes hydrophilic when pH of stock is alkaline. As a result of this test, it is determined that swelling property by change of pH of latex film, which were used as coating adhesive is the reason for hydrophobic change. 5. Hydrophilicity of coating flake increased with hydrophilic pigments. And as more of SB Latex adhesive was used and higher of calcium hardness of stock became, its hydrophilicity decreased. SB Latex adhesive film is reformed by mechanical friction. For having hydrophilicity under neutral pH, strong bruising action such as kneading is required. 6. Because swelling of adhesive film decreases as Tg of SB latex gets lower and mean diameter gets smaller, it shows hydrophobicity under neutral pH. This lowers hydrophilicity of coating flake, which leads to easy elimination with flotation reject on DIP process. Therefore, for improving future flotation yield, it is necessary to develop to use eco-friendly clean SB latex by raising Tg and increasing mean diameter for recycling, and as a result, to reduce excessive loss of coating flake as a reject from deinking process.

• 마이크로전자및패키징학회지
• /
• 제8권3호
• /
• pp.55-62
• /
• 2001

최근 전자 제품에서 사용이 폭발적으로 증가하고 있는 BGA, CSP 등의 면실장형 부품의 폭 넓은 채용에 따라서 베어 보드에서 solderability에 영향을 미치는 평탄한 표면 처리에 대한 요구는 갈수록 증가되고 있다. 무전해 Ni/Au도금 처리는 이러한 요구에 대한 해결책을 가지고 있어서 많은 전자제품에서 평탄한 표면 처리를 요구하는 응용 분야에 폭 넓게 사용되고 있다. 그러나, 무전해 Ni/Au 도금은 평탄한 표면 처리를 가지는 반면에 도금 공정에서 Ni의 산화와 적정한 P성분과 같은 몇 가지 해결요소를 가지고 있는 실정이다. 본 연구에서는 무전해 Ni/Au 도금 처리를 한 보드에서 BGA의 solderability에 미치는 영향을 사전 조사한 후, NiP 산화 특성과 보드의 휨과 간은 주요 인자를 선정하였다. 이를 위하여 먼저, 다양한 도금 조건을 가지는 테스트 보드를 제작한 후, 도금 공정에서 P성불을 감소시켜 NiP 산화 특성을 개선하였다. 또한 다양한 내층 구조와 휨 분석을 통해 내층 구조를 개선하여 보드의 휨을 최소화하였다. Solderability의 평가를 위해서 최적의 조건으로 제작된 보드에 BGA를 실장하여 보드의 휨과 도금 특성을 분석하였다. BGA의 접합부 조직은 주사 전자현미경(SEM: Scanning Electronic Microscope)과 광학 현미경(Optical Microscope)으로 관찰하였으며, 성분 분석은 EDS(Energy Dispersive Spectroscopy)를 활용하였다. 또한 기계적인 특성은 ball shear tester를 사용해서 파괴 강도와 모드를 분석하였다.