• 제목/요약/키워드: Piping design system

검색결과 264건 처리시간 0.031초

비 이상화된 원주방향 관통균열이 존재하는 두꺼운 배관의 균열 성장 매개변수 계산 (Evaluation of Crack Growth Estimation Parameters of Thick-Walled Cylinder with Non-Idealized Circumferential Through-Wall Cracks)

  • 한태송;허남수;박치용
    • 비파괴검사학회지
    • /
    • 제33권2호
    • /
    • pp.138-146
    • /
    • 2013
  • 본 논문에서는 두꺼운 배관에 존재하는 비 이상화된 원주방향 관통균열의 탄성 응력확대계수 해를 제시하였다. 이를 위해 3차원 탄성 유한요소해석을 수행하였으며, 배관의 형상 및 비 이상화된 원주방향 관통균열의 영향을 고려하기 위해 배관의 두께, 기준균열길이 및 관통균열길이 비를 체계적으로 변화시켰다. 하중 조건으로는 인장하중, 굽힘모멘트 및 내압을 고려하였다. 또한 본 논문에서는 이상화된 원주방향 관통 균열로부터 비 이상화된 원주방향 관통균열의 응력확대계수를 쉽게 계산하기 위해 관통균열 보정계수를 제시하였다. 본 논문의 결과는 실제 균열성장거동을 고려하여 원자력 배관의 배관파단확률을 보다 정확하게 계산하기 위해 적용될 수 있다.

Inelastic vector finite element analysis of RC shells

  • Min, Chang-Shik;Gupta, Ajaya Kumar
    • Structural Engineering and Mechanics
    • /
    • 제4권2호
    • /
    • pp.139-148
    • /
    • 1996
  • Vector algorithms and the relative importance of the four basic modules (computation of element stiffness matrices, assembly of the global stiffness matrix, solution of the system of linear simultaneous equations, and calculation of stresses and strains) of a finite element computer program for inelastic analysis of reinforced concrete shells are presented. Performance of the vector program is compared with a scalar program. For a cooling tower problem, the speedup factor from the scalar to the vector program is 34 for the element stiffness matrices calculation, 25.3 for the assembly of global stiffness matrix, 27.5 for the equation solver, and 37.8 for stresses, strains and nodal forces computations on a Gray Y-MP. The overall speedup factor is 30.9. When the equation solver alone is vectorized, which is computationally the most intensive part of a finite element program, a speedup factor of only 1.9 is achieved. When the rest of the program is also vectorized, a large additional speedup factor of 15.9 is attained. Therefore, it is very important that all the modules in a nonlinear program are vectorized to gain the full potential of the supercomputers. The vector finite element computer program for inelastic analysis of RC shells with layered elements developed in the present study enabled us to perform mesh convergence studies. The vector program can be used for studying the ultimate behavior of RC shells and used as a design tool.

광양만의 홍수기 및 갈수기의 오염물질 체류시간 산정 (Estimation of Pollutants Residence Time During the Flood and Dry Season in Gwangyang Bay)

  • 이인철;김진혁;공화훈
    • 한국해양공학회지
    • /
    • 제22권6호
    • /
    • pp.20-26
    • /
    • 2008
  • In this paper, in order to set up the management system of water quality environment in Gwangyang Bay, the cluster analysis of water quality environment, the estimation of inflowing pollutant loads and residence time of pollutants in this bay was carried out. The Gwangyang Bay was divided into eight sea areas by cluster analysis and spatio-temporal change of water quality. The river discharges in the Bay were calculated about $11,681{\times}103m^3/day$ from the numerical simulation by Tank model. In addition, inflowing pollutant loads of COD, SS, TN, TP, DIN and DIP in Gwangyang Bay were estimated at 398 ton-COD/day, 2,846 ton-SS/day, 195 ton-TN/day, 5 ton-TP/day, 126 ton-DIN/day and 3 ton-DIP/day, respectively. Moreover, residence times of COD, TN and TP in the Bay was estimated at 6 days-COD, 20 days-TN and 195 days-TP, respectively in the dry season, and 3 days-COD, 6 days-TN and 21 days- TP, respectively, in the flood season. The central part of Gwangyang Bay (Region IV) has the longest residence time of overall pollutants.

배열회수보일러 기수분리기의 응력해석 및 평가 (Stress Analysis and Evaluation of Steam Separator of Heat Recovery Steam Generator (HRSG))

  • 이부윤
    • 한국기계가공학회지
    • /
    • 제17권4호
    • /
    • pp.23-31
    • /
    • 2018
  • Stress of a steam separator, equipment of the high-pressure (HP) evaporator for a HRSG, was analyzed and evaluated according to ASME Boiler & Pressure Vessel Code Section VIII Division 2. First, from the analysis results of the piping system model of the HP evaporator, reaction forces of the riser tubes connected to the steam separator, i.e., nozzle loads, were derived. Next, a finite element model of the steam separator was constructed and analyzed for the design pressure and the nozzle loads. The results show that the maximum stress occurred at the bore of the riser nozzle. The primary membrane stresses at the shell and nozzle were found to be less than the allowable stress. Next, the steam separator was analyzed for the steady-state operating conditions of operating pressure, operating temperature, and nozzle loads. The maximum stress occurred at the bore of the riser nozzle. The primary plus secondary membrane plus bending stress at the shell and nozzle was found to be less than the allowable stress.

설비공학 분야의 최근 연구 동향 : 2009년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2009)

  • 한화택;이대영;김서영;최종민;백용규;권영철
    • 설비공학논문집
    • /
    • 제22권7호
    • /
    • pp.492-507
    • /
    • 2010
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

면내압축하중을 받는 유공판의 좌굴 및 최종강도 평가에 관한 연구 (Estimation of Buckling and Ultimate Strength of a Perforated Plate under Thrust)

  • 고재용;박주신;주종길
    • 해양환경안전학회지
    • /
    • 제10권2호
    • /
    • pp.41-47
    • /
    • 2004
  • 선체구조 부재에는 이중저의 거더 및 늑판등에서 유공을 가진 판이 많이 사용되고 있는데, 이는 중량 경감, 사람 및 화물의 이동, 배관 등의 목적이다. 보통은 강도상 큰 문제가 없는 부위에 위치하지만, 매로는 불가피하게 높은 응력이 작용하는 부위에 설치해야 할 경우가 있다. 이러한 판에 유공의 존재는 면내 하중에 의한 탄성좌굴강도 및 최종강도에 큰 영향을 주게 된다. 따라서, 유공판의 탄성좌굴강도 및 최종강도 평가는 선박의 초기 구조설계단계에서 구조부재 치수를 결정할 매, 검토해야 할 중요한 설계기준 중의 한가지가 된다. 그러므로, 유공판에 대한 합리적이고 신뢰적인 탄성좌굴강도 및 최종강도 설계식이 필요하게 되었다. 본 연구에서는 다양한 종횡비와 유공의 치수비 그리고 세장비의 영향을 고려하여 탄소성대변형 유한요소법을 근간으로 한 해석코드인 ANSYS(7.1)를 사용하여 시리즈해석을 수행하였다.

  • PDF

종횡방향 압축하중이 작용하는 유공판의 좌굴을 고려한 설계식 개발 (Development of Designed Formula considering Buckling under Longitudinal and Transverse Axial Compressive Load)

  • 박주신;고재용;이준교
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2005년도 춘계학술대회 논문집
    • /
    • pp.55-60
    • /
    • 2005
  • 선체구조 부재에는 이중저의 거더 및 늑판등에서 유공을 가진 판이 많이 사용되고 있고, 이는 중량 경감, 사람 및 화물의 이동, 배관 등의 목적으로, 보통은 강도상 큰 문제가 없는 부위에 위치하지만, 때로는 불가피하게 높은 응력이 작용하는 부위에 설치해야 할 경우도 있다. 이러한 판에 유공의 존재는 면내 하중에 의한 탄성좌굴강도 및 최종강도에 큰 영향을 주게 된다. 따라서, 유공판의 탄성좌굴강도 및 최종강도 평가는 선박의 초기 구조설계단계에서 구조부재 치수를 결정할 때 검토해야 할 중요한 설계기준 중의 한가지 이다. 그러므로, 유공판에 대한 합리적인 신뢰적인 탄성좌굴강도 및 최종강도 평가가 필요시 되고있다. 본 연구에서는 다양한 종횡비와 유공의 치수비 그리고 세장비의 영향을 고려하여 탄소성대변형유한요소법을 근간으로 한 구조해석프로그램인 ANSYS를 사용하여 수치계산을 수행하였다.

  • PDF

면내압축하중을 받는 유공판의 좌굴 및 최종강도 평가에 관한 연구 (Estimation of Buckling and Ultimate Strength of a Perforated Plate under Thrust)

  • 박주신;고재용
    • 해양환경안전학회:학술대회논문집
    • /
    • 해양환경안전학회 2004년도 추계학술발표회
    • /
    • pp.129-135
    • /
    • 2004
  • 선체구조 부재에는 이중저의 거더 및 늑판등에서 유공을 가진 판이 많이 사용되고 있고, 이는 중량 경감, 사람 및 화물의 이동, 배관 등의 목적으로, 보통은 강도상 큰 문제가 없는 부위에 위치하지만, 때로는 불가피하게 높은 응력이 작용하는 부위에 설치해야 한 경우도 있다. 이러한 판에 유공의 존재는 면내 하중에 의한 탄성좌굴강도 및 최종강도에 큰 영향을 주게 된다. 따라서, 유공판의 탄성좌굴강도 및 최종강도 평가는 선박의 초기 구조설계단계에서 구조부재 치수를 결정할 때 검토해야 할 중요한 설계기준 중의 한가지 이다. 그러므로, 유공판에 대한 합리적인 신뢰적인 탄성좌굴강도 및 최종강도 설계식이 필요시 되고 있다. 본 연구에서는 다양한 종횡비와 유공의 치수비 그리고 세장비의 영향을 고려하여 탄소성대변형 유한요소법을 근간으로 한 해석코드인 ANSYS를 사용하여 수치계산을 수행하였다.

  • PDF

수격 현상에 근거한 대형 주증기관의 구조건전성 평가 (Structural Integrity Evaluation of Large Main Steam Piping by Water Hammering)

  • 조종현;이영신;김연환;김해란
    • 대한기계학회논문집A
    • /
    • 제36권9호
    • /
    • pp.1103-1108
    • /
    • 2012
  • 주증기관은 보일러와 터빈을 연결하는 주요계통이다. 운전조건으로 인한 배관시스템에 손상을 제한 할 수 있기 때문에 수격현상 해석은 중요하다. 배관시스템의 불안정한 유동에 의해 생성되는 수격현상은 압력의 과도한 변화, 진동 및 소음을 일으킬 수 있다. 주증기관 구조는 운전환경아래 압력맥동 및 여러 진동 등을 안전하게 견딜 수 있도록 설계되어야 한다. 본 논문에서는 정지 및 정상 운전기간 동안 배관에 유입되는 수격현상을 과도조건에 적용하여 ASME 피로수명 방법론과 유한요소해석에 따라 주증기관의 구조건전성을 평가하였다. 계산된 교번응력 및 피로응력 평가 결과, ASME 피로수명의 허용요건을 만족하였다.

오일-질소가스 혼합유체를 이용한 고온 오일플러싱 시스템 공정설계에 관한 연구 (A Study on Process Design of Hot Oil Flushing System Using Oil-Nitrogen Gas Mixing Fluid)

  • 이윤호;최부홍
    • 해양환경안전학회지
    • /
    • 제23권5호
    • /
    • pp.541-548
    • /
    • 2017
  • 본 연구에서는 해양플랜트설비 건조 현장에서 사용되고 있는 기존 고온 오일 플러싱 장비에 대한 성능개선을 위해 기존의 플러싱 장치에 사용되던 오일에 질소가스를 혼합한 고온 오일 플러싱 시스템에 대하여 국제표준화기구 코드(ISO code)를 기준으로 이론적 연구를 수행하였다. 연구를 위해 오일-질소가스 혼합유체 플러싱 시스템 공정을 설계 후 청정성능에 영향을 주는 혼합유체의 혼합비율, 온도, 레이놀즈수 및 액상분율 등에 대한 공정모사 결과도 분석하였다. 그 결과 관 직경과 가스상의 체적분률이 일정한 상태에서 혼합유체의 체적유량이 증가될수록 수평 유압배관 입출구의 액상분율 차이 ${\Delta}{\alpha}_L$ 값은 증가하게 되고 배관길이 방향의 위치에 따라 오일과 질소가스 기포 사이의 상분포가 달라짐을 확인했다. 이러한 상분포의 변화는 오일-질소가스 혼합유체 플러싱 시스템의 청정성능에도 커다란 영향을 줄 것으로 예상된다.