• Journal of Welding and Joining
• /
• v.33 no.1
• /
• pp.54-60
• /
• 2015

Laser-arc hybrid welding has been considered as an effective pipe girth welding process since early 2000's. Tolerance for fit-up offsets such as gap and edge misalignment is one of most important requirements in pipe girth laser-arc hybrid welding, and several approaches using parameter optimization, a laser beam scanning and an arc oscillation have been tried. However the required offset tolerance has not been fully accomplished up to now and laser-arc hybrid welding has not been widely applied in pipeline construction than expected, despite of its high welding speed and deep penetration. In this study, internal welding was adopted to ensure the offset tolerance and sound back bead. The effect of welding parameters on bead shape was investigated at the flat position. Also tolerances for gap and edge misalignment were verified as 0.5 mm and 2.0 mm, respectively. The position welding trials were conducted at several welding positions from the flat to the overhead position in a downward direction. With the fixed welding speed, arc current for gas metal arc welding current and laser output power, adequate welding voltages for gas metal arc welding were suggested for each position.

• Journal of Welding and Joining
• /
• v.28 no.6
• /
• pp.1-3
• /
• 2010

• Proceedings of the KWS Conference
• /
• 2000.04a
• /
• pp.287-289
• /
• 2000

• Journal of the Korean Institute of Gas
• /
• v.6 no.1 s.17
• /
• pp.17-23
• /
• 2002

This paper introduces the spring-mounted odometer system which maintains the correct contact with the pipe wall and measures the distance along the pipe. The odometer wheel is designed to keep contact to the pipelines inner wall and to generate fifty rectangular pulses per one turn(159.5681mm) during pigging. The pipeline has the defects in various types such as buckles, winkles, cracks, dents, welding point and so on. Specially girth welding points which exist each 12m of the pipeline, much affects the operational environment of the odometer. The measurement error of the distance along the pipe is accumulated, for the measurement error of wheel's circumference and the pipeline inner environment. So, this paper proposes the method for the error compensation based on the analysis of the odometer's behavior around the girth welding point of pipe. The experimental results show that developed odometer system can be used for the intelligent pig with good performances.

• Journal of Welding and Joining
• /
• v.35 no.1
• /
• pp.55-60
• /
• 2017

There are many Industry Code and Standard (ICS) for Structural Integrity Assessment (SIA) on welded structure with defect. The general ICSs, such as R6, BS 7910 and API 579-1/ASME FFS-1, provide equations to determine the upper bound residual stress profiles based on collections from many literatures. However, these residual stress profiles used in the SIA cause the conservative design for welded structures. In this study, the structural integrity assessment for girth weld in pipeline has been conducted based on fracture mechanics. In addition, thermo-elastic plastic FE analysis was performed for evaluating the residual stress of girth weld in pipeline. The weight function solution is used to determine the stress intensity factor using the residual stress profile obtained by the FE analysis. This approach can account for redistribution and relaxation of residual stress as the defects grow. In order to the evaluate quantitative comparison between BS 7910 and weight function solution, structural integrity assessment determining allowable crack size on cracked pipe was performed with failure assessment diagram.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.222-227
• /
• 2001

This paper introduces the spring-mounted odometer system which maintains the correct contact with the pipe wall and measures the distance along the pipe. The odometer wheel is designed to keep contact to the pipelines inner wall and to generate fifty rectangular pulses per one turn(l59.5681mm) during pigging. The pipeline has the defects in various types such as buckles, winkles, cracks, dents, welding point and so on. Specially, girth welding points which exist each 12m of the pipeline, much affects the operational environment of the odometer. The measurement error of the distance along the pipe is accumulated, for the measurement error of wheel's circumference and the pipeline inner environment. So, this paper proposes the method for the error compensation based on the analysis of the odometer's behavior around the girth welding point of pipe. The experimental results show that developed odometer system can be used for the intelligent pig with good performances.

• Journal of Welding and Joining
• /
• v.19 no.5
• /
• pp.454-459
• /
• 2001

결함평가에 사용되는 작업자기준과 공학적 해석기준에 대한 비교와 각국에서 가스배관 원주용접부 결합평가에 사용하는 규격에 대한 검토를 수행하였다. 우리나라 가스배관 시공에는 API 1104를 기분으로 사용하고 있으며, 결함평가기준은 KSB 0845를 따르고 있다. 가스배관용접부에 대해 안전성과 효율성이 겸비된 새로운 결함평가방안을 구축하기위해 실배관 파열시험 및 대변형시험이 국내외에서 지속적으로 수행하고 있다.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.84-84
• /
• 2009

파이프라인을 건설함에 있어 가장 중요한 기술이 배관 용접기술이다. 즉 파이프와 파이프를 연결하는 작업이 공사 진척도를 결정하기 때문에, 이를 얼마나 경제적으로 신속하게 수행해 나가느냐하는 것은 건설기간 및 건설비용을 결정하는 핵심 요소이다. 가스배관 시공 원주용접 방법은 여러 가지 있는데, 현재 국내에서는 전량 수동용접을 채택하고 있다. 이 방법은 국내 가스배관을 건설한 초기부터 적용해온 것으로 우수한 품질을 확보할 수 있으며, 취약한 국내 자동화기술과 열악한 도로 매설 시공여건에서 적용하기 용이한 방안이다. 그러나 우수한 용접기량을 보유한 용접사가 점차 부족해지고, 배관시공 시간을 단축하고 비용을 줄이기 위한 필요성이 점차 커지면서 이를 해결할 수 있는 기술로서 자동원주용접방안이 있다. 이 기술들은 해외 가스배관에 이미 오래전부터 적용되어 용접부위 신뢰성과 품질 우수성을 확보하고 시공비용절감을 달성하고 있다. 자동용접을 적용하기 위해서는 용접절차를 수립하여 절차인증시험을 수행하고, 기존방안과 동일이상의 품질이 확보되며 효율성을 겸비해야만 한다. 국가 기본에너지의 안정적인 공급을 위해 적기 시공이 필요하고, 1 km당 10 억원 이상이 소요되는 배관시공비용 중 약 1/3이 용접비파괴검사 비용인 점을 감안할 때 품질이 확보되면서 경제적인 시공방안이 있다면 이를 적용하는 것이 국가 산업 경제적 측면에서 필요한 일이다. 이와 관련된 연구에서는 국내 가스배관 원주용접에 적용 가능한 용접공정을 검토하고, 용접절차를 수립하여 절차인증시험을 수행하였으며, 추가로 배관 원주 자동용접부위에 대한 기계적 특성 평가를 실시하였다. 현재 국내 건설여건과 비파괴검사 기준을 만족시키고 안전성과 효율성을 겸비한 방법으로는 초층과 2층은 수동 GTAW를 적용하고 나머지 층은 반자동 FCAW를 적용하는 방안이 적절한 것으로 판단된다. 전 층을 자동 GTAW로 용접하는 방안은 품질은 확보되지만 효율성측면에서 대형배관에는 적용하기 어려울 것으로 보이며, 해외에서 많이 사용되는 자동 GMAW 방안은 국내 비파괴검사기준을 만족시키기 어려워 검토대상에서 제외하였다. 본 논문에서는 두 가지 용접방법에 대한 용접공정개발과정과 원주용접부위 기계적 특성을 검토하여 최적방안을 제시하고자 한다.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.204-206
• /
• 2005

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.165-167
• /
• 2004

The failure pressure for corroded pipeline was measured by burst testing and classified with respect to corrosion sizes and corroded regions - the body, the girth weld and the seam weld of pipe. A series of finite element analyses were performed to obtain a limit load solution for corrosion defects on the basis of burst test. As a result, the criteria for failure assessment of corrosion defect within the body, the girth weld and the seam weld of API 5L X65 gas pipeline were proposed.