• 한국유체기계학회 논문집
• /
• 제6권4호
• /
• pp.45-49
• /
• 2003

This work focuses on eliminating tiny particles from the coolant in a nuclear pipe line by using a permanent magnet on the exterior surface of the pipe. This method have some merits compared with the currently applied methods and is expected to be applied to most of the pipe lines in the nuclear plant. For instance in this method, a ring is attacked to the exterior surface of the pipe, so that it does not affect the inflows directly. Further, the cost needed in the initial build-up of the facility is low.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.155-158
• /
• 2003

Orbital GTA welding is used in the pressure pipe line of auto-mobile, LNG and plant piping. To weld the pipe line safely, to some extent, the back bead must be formed in the root pass. In the plate welding the back bead can be observed, but in the pipe welding, the back bead can not be observed directly. In the welding around circumference, the parameters such as gravity, surface tension and arc force are different at each position. And then D/B for welding condition at each position are required. We also studied about the setting of the optimum orbital welding condition by controlling heat input.

• 한국지반환경공학회 논문집
• /
• 제8권6호
• /
• pp.13-19
• /
• 2007

본 연구에서는 ${\bigcirc}{\bigcirc}$ 도시철도 ${\bigcirc}$ 호선 ${\bigcirc}$ 공구의 지중 전력구관로 매설공사 후 발생한 합성수지 직관의 파손에 대한 원인을 고찰하기 위하여 문헌연구를 통하여 설계 및 구조해석에 사용된 매개변수를 분석하였다. 그리고 현장조건을 면밀히 분석하고 현장 관로를 모사한 관로의 시험시공 및 물다짐 시험을 수행하였다. 또한, 송전관로의 구조적 안정성과 수치해석을 통한 송전관로 기초지반 침하영향 검토를 수행하였다. 수행결과 물다짐에 의하여 얻을 수 있는 상대밀도는 보통 이상이었으며 시방기준에 의거한 상대다짐도는 양호한 물다짐을 수행할 경우 90%정도의 결과를 얻을 수 있었다.

• 상하수도학회지
• /
• 제27권3호
• /
• pp.331-337
• /
• 2013

Post-chlorination for disinfection in portable water process is final process. The design factors of post-chlorination are inflow pipe line from tank of filtrated water to cleanwell, injection point of chlorine, appropriate shape of baffle in cleanwell for disinfection efficient improvement. Until now, we did not have the design standard for post-chlorination. we evaluated most suitable design method of post-chlorination process in portable water process by using computational fluid dynamics in this research. We found the result that the pipe to connect the cleanwell should be one. If pipe line split into two or more, uniform distribution of the flow is difficult. Second, optimal injection point of chlorine is the middle of pipe line to connect the cleanwell. Therefore, it is not economical to install chlorine contact basin in cleanwell. Third, the shape of baffle should be designed in order to water flows in one direction. And we found that it is better to design the low number of flow turning.

• 대한토목학회논문집
• /
• 제32권5D호
• /
• pp.473-481
• /
• 2012

천연가스는 타 화석연료에 비해 온실가스를 적게 배출하는 청정연료로서 가채연수가 길고 상대적으로 가격 변동이 적어 세계적으로 사용량이 증대되고 있으며, 이에 따라 신규 가스전 개발 및 대규모의 천연가스 플랜트 건설 사업이 세계 각지에서 추진되고 있다. 특히 다양한 플랜트 사업 중 해외 천연가스 파이프라인 사업의 경우 보다 안정적이고 효율적인 천연가스의 수송을 위해 지역 간이나 국가 간에 적용되는 방식으로서 건설 수요가 괄목할만하게 증가하고 있으며 이미 전체 천연가스 교역의 72%를 차지하고 있다. 그러나 우리나라의 경우 해외의 주요 가스전과의 물리적인 거리 및 저장시설에 한정된 수요 발생으로 인해 해외 파이프라인 공종의 참여가 뒤떨어져 있는 것이 현실이다. 따라서 본 연구에서는 해외 천연가스 파이프라인 사업의 진출을 위해 사업계획 단계를 중심으로 표준화된 업무 프로세스 모델을 구축하고자 하였다. 국 내외의 파이프라인 사업 및 해외건설 프로세스를 분석하고, 해외 천연가스 파이프라인 사업의 특성을 반영하여 3단계의 레벨을 가진 업무 프로세스 모델을 도출하였다. 이후 전문가를 활용하여, 업무 프로세스 모델을 테스트베드에 적용하여 실무적 검증을 수행하였으며, 이와 별도로 추가적인 설문조사를 통해 본 연구에서 제시된 업무 프로세스 모델의 적용성과 효용성을 확인하였다. 본 연구에서 제시된 업무 프로세스 모델을 기반으로 기업의 노하우를 반영한다면, 해외 천연가스 사업 의사결정을 위한 객관적인 기준으로 활용할 수 있을 것으로 기대된다.

• 디지털융복합연구
• /
• 제17권6호
• /
• pp.169-175
• /
• 2019

본 연구의 목적은 합류식 하수처리구역 내에 대형 건축물을 건설하는 경우, 정화조를 설치하는 대안과 정화조를 대신하여 전용오수관로를 설치하는 대안의 경제성을 비교분석하는 것이다. 이를 위해 우리나라 대표적 대형 건축물인 롯데월드타워의 사례를 들어 두 대안 간의 비용편익분석을 수행하였다. 롯데월드타워 건물에 정화조를 설치하는 대신에 전용오수관로를 설치할 경우, 회수기간은 6.2년, 순현재가치(NPV)는 약 61.7억 원이 발생하며, B/C비율은 1.93인 것으로 나타났다. 이러한 사례분석 결과는 향후 정화조 폐쇄에 대한 정책수립과 대형 건축물 신축 시 전용오수관로 건설에 대한 타당성을 검토할 때 적용할 수 있는 유용한 지침을 제공해 줄 것으로 보인다. 향후에는 원인자부담금과 전용오수관로 관리책임 부담여부, 악취감소에 따른 경제적 효익 등을 비용편익분석에 추가적으로 고려할 필요가 있다.

• 상하수도학회지
• /
• 제16권6호
• /
• pp.710-716
• /
• 2002

A General Pipe Break Prediction Model that incorporates linear and exponential models in its form is developed. The model is capable of fitting pipe break trends that have linear, exponential or in between of linear and exponential trend by using a weighting factor. The weighting factor is adjusted to obtain a best model that minimizes the sum of squared errors of the model. The model essentially plots a best curve (or a line) passing through "cumulative number of pipe breaks" versus "break times since installation of a pipe" data points. Therefore, it prevents over-predicting future number of pipe breaks compared to the conventional exponential model. The optimal replacement time equation is derived by using the Threshold Break Rate equation by Loganathan et al. (2002).

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권1호
• /
• pp.5-14
• /
• 2002

In this paper, we analyze inductive interference in conductive material around 345 kV power transmission line, and evaluate the effects of mitigation wires. Finite element method (FEM) is used to numerically compute induced eddy currents as well as magnetic fields around powder transmission lines. In the analysis model, geometries and electrical properties of various elements such as power transmission line, buried pipe lines, overhead ground wire, and conducting earth are taken into accounts. The calculation shows that mitigation wire reduces fairly good amount of eddy currents in buried pipe line. To find the optimum magnetic field shielding location of mitigation wire, we applied evolution strategy algorithm, a kind of stochastic approach, to the analysis model. Finally, it was shown that we can find more effective shielding effects with optimum location of one mitigation wire than with arbitrary location of multi-mitigation wires around the buried pipe lines.

• 대한기계학회논문집B
• /
• 제26권1호
• /
• pp.1-11
• /
• 2002

Flow of fluid has been studied in various fields of fluid engineering. To hydraulic engineers, the unsteady flow such as pulsation and liquid hammering in pipes has been considered as a serious trouble. So we are supposed to approach the formalized mathematical model by using more exact momentum equation for fluid transmission lines. Most of recent studies fur pipe line have been studied without considerations of variation of viscosity and temperature, which are the main factors of pressure loss causing the friction of fluid inside pipe line. Frequency response experiments are carried out with use of a rotary sinusoidal flow generator to investigate wave equation take into account viscosity and temperature. But we observed that measured value of gains are reduced as temperature increased. And it was respectively observed that the measured value of gains are reduced and line width of gain is broadened out, when temperature was high in the same condition. As we confessed, pressure loss and phase delay are closely related with the length, diameter and temperature of pipe line. In addition, they are the most important factors, when we decide the momentum energy of working fluid.

• 한국압력기기공학회 논문집
• /
• 제7권3호
• /
• pp.40-47
• /
• 2011

KSNPs(Korea Standard Nuclear Power Plant) have been applied the break exclusion criteria to the high energy lines passing through containment penetration area to ensure that piping failures would not cause the loss of containment isolation function, and to reduce the resulting dynamic effects. Systems with the criteria are the Main Steam system, Feed Water system, Steam Generator Blowdown system, and Chemical & Volume Control system. In accordance with FSAR(Final Safety Analysis Report), a 100% volumetric examination by augmented in-service inspection of all pipe welds appled the break exclusion criteria is required for the break exclusion application piping. However, it is difficult to fully satisfy the requirements of inspection because 12", 8" and 6" weldolet weldments of Main Steam pipe line have complex structural shapes. To resolve the difficulty on the application of conventional UT(Ultrasonic Testing) technique, realistic mock-ups and UT calibration blocks were made. Simulations of conventional UT were performed utilizing CIVA, a commercial NDE(Nondestructive Examination) simulation software. Phased array UT experiments were performed through mock-up including artificial notch type flaws. A phased array UT technique is finally developed to improve the reliability of ultrasonic test at main steam line pipe to 12", 8" and 6" branch connection weld.