• Journal of Ecology and Environment
• /
• v.29 no.6
• /
• pp.521-529
• /
• 2006

This study was carried out to classify all forest vegetation types in Ulleung Island, Korea using the methodology of the Z.-M. school's phytosociology, and map out the spatial distribution patterns of those vegetation types. The forest vegetation was classified into the mountain forest type (Acer okamotoanum community group) and maritime forest type (Artemisia scoparia community group). Vegetation units at the community level were divided into three categories; six communities, sixteen groups, and seven subgroups, giving a total of 22 communities. Total area for mapping was 5,544.9 ha, of which Fagus engleriana community accounted for 1,952 ha (35.2%), Hedera rhambea community ror 1,196 ha (21.6%), Camellia japonica community for 1,104 ha (19.9%), Sambucus sieboldiana var. pendula community for 612 ha (11.0%), Aster spathulifolius community for 506 ha (9.1%), and Tsuga sieboldii - Pinus parviflora community for 174 ha (3.1%). According to canonical correspondence analysis (CCA), variables such as $Mg^{2+}$, pH, $Ca^{2+}$ were positively correlated in maritime vegetation types, and variables such as total nitrogen, carbon content, C/N ratio and ration exchange capacity (CEC) were highly correlated in mountain vegetation types, respectively. The sea level and the slope direction were not showing regular trend as a factor to decide on species diversity, evenness and richness in this research area. But it seems to be affected by topography, slope degree and dominance vegetation.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.100-109
• /
• 2017

This study was conducted for preliminary survey and management support for Pine Wood Nematode (PWN) suppression. We took areal photographs of 6 areas for a total of 2,284 ha during 2 weeks period from 15/02/2016, and produced 6 ortho-images with a high resolution of 12 cm GSD (Ground Sample Distance). Initially we classified 423 trees suspected for PWN infection based on the ortho-images. However, low accuracy was observed due to the problems of seasonal characteristics of aerial photographing and variation of forest stands. Therefore, we narrowed down 231 trees out of the 423 trees based on the initial classification, snap photos, and flight information; produced thematic maps; conducted field survey using GNSS; and detected 23 trees for PWN infection that was confirmed by ground sampling and laboratory analysis. The infected trees consisted of 14 broad-leaf trees, 5 pine trees (2 Pinus rigida), and 4 other conifers, showing PWN infection occurred regardless of tree species. It took 6 days for 2.3 men from to start taking areal photos using UAV (Unmanned Aerial Vehicle) to finish detecting PNW (Pine Wood Nematode) infected tress for over 2,200 ha, indicating relatively high efficacy.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.2
• /
• pp.23-29
• /
• 2015

To fulfill the need for reuse indigenous tree to mitigate the elimination of nature forests due to road construction, one representative method for this reuse is to transplant them and re-establish in similar conditions. In order to investigate the transplant and establishment of indigenous tree, a correlation and regression analysis was conducted by species and tree size. Data were collected for 6 years(2008~2013) in 7 construction sites in cooperation with the Korea Expressway Corporation. Regarding the transplanted indigenous trees status, the success rate of transplant was 15,519(69%) of 22,521. The tree most transplanted was Pinus densiflora(15,562), followed by Quercus spp.(6,156), Prunus sargentii(235), and P. thunbergii(154). P. densiflora and P. thunbergii belong to the conifer group while Quercus spp., Prunus sargentii belong to the broadleaf group. As a result of a contrast test, the conifer group had a significantly lower success rate of transplant than the broadleaf group. In the relation of root collar diameter and success rate of transplant, there was the tendency that the larger the root collar diameter, the lower the success rate of transplant. This study demonstrated that there is a strong negative correlation between the two factors(r=-0.730, p>0.000). The predicted regression equation of the success rate of transplant was Y= -0.811X+88.627(X: root collar diameter, Y: success rate of transplant) and the $R^2$ value for the linear equation was 0.532.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.213-222
• /
• 2017

Heat treatment of wood is an attractive alternative environmentally-friendly treatment to add value of less valuable woods by improving color, dimensional stability, and natural durability. To improve the color properties of Korean white pine (Pinus koraiensis) and royal paulownia (Pauwlonia tomentosa), we treated the woods at $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$, and $220^{\circ}C$ for 2 hours. Color change after heat treatment was evaluated using the CIE-Lab color system and survey was conducted to determine the consumer preferences towards color of heat-treated wood. Lightness ($L^*$) decreased with increasing temperature and the higher degree of change was obtained in royal paulownia. The red/green chromaticity ($a^*$) in both wood decreased after heat treatment at $160^{\circ}C$, and constantly increased after heat treatment at $180^{\circ}C$ to $220^{\circ}C$. Yellow/blue chromaticity ($b^*$) in Korean white pine tended to increase after heat treatment at $160^{\circ}C$, then decreased gradually afterwards. In royal paulownia, $b^*$ values linearly increased with increasing temperature. Overall color change (${\Delta}E^*$) increased with increasing temperature with higher degree obtained in royal paulownia. Samples with the clamps in both wood species showed lower degree of the change in $L^*$, $a^*$, b and ${\Delta}E^*$. The results of the consumer preferences test showed that the darker colors of heat-treated woods were more preferred by consumers compared to the lighter colors of untreated woods. Consequently, heat treatment could enhance the color properties of Korean white pine and royal paulownia woods for value added products.

• Journal of Korean Society of Forest Science
• /
• v.79 no.2
• /
• pp.173-186
• /
• 1990

To investigate the structure of the plant community of Soribong area in Kwangnung forest, forty-six plots were set up by the clumped sampling method. The classification by TWINSPAN and four kinds of multivariate ordination(PO, PCA, RA, DCA) were applied to the study area in order to classify them into several groups based on woody plants and environmental variables. The classification had been successfully overlayed on an ordination of the same data using DCA. The plots can be classified into four groups by TWINSPAN and DCA. The successional trends of tree species by both techniques seem to be from Pinus densiflora through Quercus mongolica, Q. serrata, Q. aliena, Carpinus laxiflora, Sorbus alnifolia to C. cordata, Fraxinus rhynchophylla, Cornus controversa in the canopy layer, and from Rhododendron mucronulatum, Rhus triohocarpa, Lespeoleza cyrtobotrya, Weigela subsessilis through Corylus sieboldiana, Lindera obtusiloba to Slaphylea bumalda, Callicarpa japonica, Lonicera maackii in the understory layer. As a result of the analysis for the relationship between the stand scores of DCA and environmental variables, they had a tendancy to increase significantly from the P. densiflora community to C. cordata community that was soil pH and the amount of humus, total nitrogen and exchangeable cations.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.781-787
• /
• 2001

The spread rate of forest fire was analyzed on Samcheok forest fire that broke out on April 7, 2000 in Kunduck-Myun, Samcheok-City, Kangwon-Province and lasted for about 9 days. The spatial database including topography, overstory species distribution, micro-climate, daily fire front lines for the area was built using GIS and the daily spread pattern was investigated to determine a multiple regression equation to estimate forest fire spread rate. The results of the investigation showed that, on the first day, the forest fire spreaded out extremely fast up to 12.3m/min at about 10 a.m. until noon. After that, the forest fire spread rate fluctuated and slowed down as low as below 1m/min and quenched on April 15. The daily area-based spread rate along the fire spread line got to the peak of about 5,700ha on April 11, of which spread rates were recorded as 2.84m/min in the first half and 1.10m/min in the second half. Also, it was found that slope aspect, wind velocity and % area distribution of Pinus densiflora are the major factors affecting the spread rate of forest fire in this area.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.562-577
• /
• 2020

In this study, to conserve the clay seated Vairocana Buddha triad in Seonunsa temple, Gochang (Treasure 1752), the primary materials employed for creating the clay Buddha statues were scientifically analyzed. By analyzing the soil layer constituting the Buddha statues, it is observed that the said layer comprises sand having particle size greater than that of medium sand and soil having particle size smaller than that of fine sand, which were used in a ratio of 7:3, along with the bast fibers of paper mulberry (Broussonetia kazinoki). Hence, the aforementioned soil layer is composed of a mixture of sand and weathered soil, along with bast fibers to prevent scattering. By analyzing the tree species, it is found that the wooden materials constituting the bottom board and the interior of Buddha's sleeves of the Amitabha Buddha statue, Vairocana Buddha statue, and Medicine Buddha statue are hard pines (Pinus spp.). Additionally, three layers are found in the cross section of the gold layer. Furthermore, each of the hair sections of the Buddha statues is composed of earthy materials such as quartz, albite, microcline, mica, and magnetite, and the hair surface was painted by incorporating black materials containing magnetite.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.5
• /
• pp.1-12
• /
• 2019

It is important to measure the height of trees as an essential element for assessing the forest health in urban areas. Therefore, an automated method that can measure the height of individual tree as a three-dimensional forest information is needed in an extensive and dense forest. Since airborne LiDAR dataset is easy to analyze the tree height(z-coordinate) of forests, studies on individual tree height measurement could be performed as an assessment forest health. Especially in urban forests, that adversely affected by habitat fragmentation and isolation. So this study was analyzed to measure the height of individual trees for assessing the urban forests health, Furthermore to identify environmental factors that affect forest growth. The survey was conducted in the Mt. Bongseo located in Seobuk-gu. Cheonan-si(Middle Chungcheong Province). We segment the individual trees on coniferous by automatic method using the airborne LiDAR dataset of the two periods (year of 2016 and 2017) and to find out individual tree growth. Segmentation of individual trees was performed by using the watershed algorithm and the local maximum, and the tree growth was determined by the difference of the tree height according to the two periods. After we clarify the relationship between the environmental factors affecting the tree growth. The tree growth of Mt. Bongseo was about 20cm for a year, and it was analyzed to be lower than 23.9cm/year of the growth of the dominant species, Pinus rigida. This may have an adverse effect on the growth of isolated urban forests. It also determined different trees growth according to age, diameter and density class in the stock map, effective soil depth and drainage grade in the soil map. There was a statistically significant positive correlation between the distance to the road and the solar radiation as an environmental factor affecting the tree growth. Since there is less correlation, it is necessary to determine other influencing factors affecting tree growth in urban forests besides anthropogenic influences. This study is the first data for the analysis of segmentation and the growth of the individual tree, and it can be used as a scientific data of the urban forest health assessment and management.

• Korean Journal of Environment and Ecology
• /
• v.36 no.5
• /
• pp.507-524
• /
• 2022

In this study, we revealed the location environment and community structural characteristics after extensively investigating Korea's warm-temperate island areas and categorizing vegetation through TWINSPAN analysis. Based on it, this study aims to suggest the direction of the vegetation restoration plan for warm-temperate forests by deriving a restoration strategy for each vegetation type. The vegetation types were clearly divided into eight types, and communities I through IV were good evergreen broad-leaved forests dominated by Machilus thunbergii and Castanopsis sieboldii. On the other hand, communities V through VIII were Pinus thunbergii forest, deciduous broad-leaved forest, and artificial forest, and retrogressive succession vegetation in the warm-temperate areas. The environmental factors derived from the DCA analysis were altitude (average temperature of the coldest month) and distance from the coastline (salt tolerance). The distribution pattern of warm-temperate forests has been categorized into M. thunbergii, C. sieboldii and Cyclobalanopsis spp. forest types according to the two environmental factors. It is reasonable to apply the three vegetation types as restoration target vegetation considering the location environment of the restoration target site. In communities V through VIII, P. thunbergiiand deciduous broad-leaved formed a canopy layer, and evergreen broad-leaved species with strong seed expansion frequently appeared in the ground layer, raising the possibility of vegetation succession as evergreen broad-leaved forests. The devastated land where forests have disappeared in the island areas is narrow, but vegetation such as P. thunbergii and deciduous broad-leaved forests, which have become a retrogressive succession, forms a large area. The restoration strategy of renewing this area into evergreen, broad-leaved forests should be more effective in realizing carbon neutrality and promoting biodiversity.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.90-95
• /
• 2004

Pitch pine (Pinus rigida) has been planted in Korean forests for several decades, primarily for erosion control and use as a fuel supply. To enhance its value, and especially potential use as lamina for structural glued laminated timber (glulam), log quality and lumber yield of pitch pine were evaluated in this study. Trees from pure pitch pine stands with an average diameter at breast height of 32 cm were felled and bucked into 3.6m long 15 cm minimum butt-end diameter logs. Over 80% of the logs were classified to No.2 or No.3 visual grade group. Upon sawing total lumber yield was 55.2%, 39.9% for structural glulam lamina, 7.2% for louver, and 8.1% for miscellaneous use. The final lumber yield for manufacturing structural glulam, after cross-cutting to eliminate knots and finger jointing, was only 15.3%. To enhance this manufacturing yield requires that the rate of knot-included lumber used as lamina be raised. However arrangement of the knot-included lamina, whose mechanical properties need to be accurately evaluated, must be optimized to minimize any reduction to the structural glulam strength. The log quality and lumber yield of pitch pine evaluated in this study are expected to facilitate proper planning for wood product manufacture in the Korean lumbering and glulam industrial field, which has not previously dealt with this species.