• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.374-380
• /
• 2015

The quality characteristics of the woodpellet manufactured from two domestic pines (Pinus densiflora S. et Z. and Pinus rigida Mill.) were investigated for the efficient energy use of woody biomass resources. Properties of woodpellets such as moisture content, heating value, ash content, apparent density and durability were determined by using the standard test method of woodpellets of Korea Forest Research Institute (KFRI) and elemental analysis. The results of elemental analysis for C, H, O and N showed 61.42% carbon, 5.56% hydrogen, 32.87% oxygen, and 0.15% nitrogen for Pinus densiflora S. et Z. and 61.03% carbon, 5.96% hydrogen, 32.83% oxygen, and 0.18% nitrogen for Pinus rigida Mill. No significant difference between Pinus densiflora S. et Z. and Pinus rigida Mill was observed on elemental analysis. Heating values of each woodpellet were ranged from 19.00 to 19.42 MJ/kg which satisfied the first grade quality standard (${\geq}18.0MJ/kg$) by KFRI. The ash contents of woodpellet were slightly different between Pinus densiflora S. et Z. and Pinus rigida Mill., and satisfied the first grade quality standard (${\leq}0.7%$) by KFRI. Apparent density of woodpellet (Pinus densiflora S. et Z.) was passed the first grade standard level (${\geq}640kg/m^3$), and woodpellets from Pinus rigida Mill. satisfied the second grade quality of the standard. The moisture contents of each woodpellet were satisfied by the first grade quality standard (${\leq}10%$). The durability of woodpellet (Pinus densiflora S. et Z.) was passed the third grade level (${\geq}95%$), but Pinus rigida Mill. woodpellet was insufficient to satisfy the quality standard.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.1
• /
• pp.39-50
• /
• 1993

The purpose of this study was to describe the micromorphological changes in Korean red pine (Pinus densiflora S. et Z.) wood decayed by a major brown-rot fungus, Lentinus lepideus, using scanning electron microscope and transmission electron microscope. At the end of the 12-week exposure to the fungus in soil block procedure(ASTM 1971), test blocks sustained 5.02% weight loss. The formation of bore hole by hyphae and penetration of hyphae through bordered pit were not observed. Instead, fungal hyphae appeared to penetrate axially tracheid luminar from the the ray cells via cross field pits. Hyphae were mainly found in lignin rich cell corner regions of tracheids, and also extensive degradation of tracheid wall occurred in this region. Extensive degradation of $S_2$ layer occurred without noticeable alteration of the $S_3$ layer, but warty layer and compound middle lamella remained relatively intact. Localized erosion, the characteristic of white rot, was observed in some cell wall and wall components including lignin were found to be decomposed.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.2
• /
• pp.81-92
• /
• 2022

To analyze the relationship between climatic factors (mean monthly temperature and total precipitation) and tree-ring growths of Pinus densiflora S. et Z. from National Parks (according to region) of the Korea, 20 trees were sampled from 13 National Parks. Only trees that were successfully cross-dated were used for dendrochronological analysis, and at least 11 trees were included. The tree-ring chronology of Mt. Bukhan (covering the shortest period of 1917 - 2016 [100 years]) was assessed, as well as that of Mt. Seorak (covering the longest period of 1687 - 2017 [331 years]). After cross-dating, each ring width series was double-standardized by first fitting a logarithmic curve and then a 50-year cubic spline. The relationships between climate and tree-ring growth were calculated with response function analysis. The results show a significant positive correlation between a given year's February-March temperature, May precipitation levels, and tree-ring growth. It indicates that a higher temperature in early spring and precipitation before cambium activity are important for radial growths of Pinus densiflora in the Korea.

• Journal of Korean Society of Forest Science
• /
• v.90 no.2
• /
• pp.210-216
• /
• 2001

Pinus densiflora S. et Z. has widely been distributed, and is one of the important main foret resources in Korea. Diameter and height growth patterns were estimated using non-linear algebraic difference equation, which requires two-measurement times $T_1$ and $T_2$. To maximize data use, all possible measurement interval data were derived using Lag and Put statements in the SAS. In results, of the algebraic difference equations applied, the Schumacher and the Gompertz polymorphic equations for diameter and height, respectively showed the higher precision of the fitting. In order to allow more precise estimation of growth than those of the basic Schumacher and the Gompertz, further refinement that combine biological realism as input into the equation would be necessary.

• Journal of Forest and Environmental Science
• /
• v.9 no.1
• /
• pp.67-80
• /
• 1993

There are a lot of serious problums associated with conventional pulping processes, such as kraft and sulfite. In order to tackle these difficulties, organic acid pulping of Populus tomentiglandulosa T. Lee and Pinus densiflora S. et Z. have been investigated as on alternative method. The acetic acid cooking of Populus tomentiglandulosa T. Lee achieved good delignification with pulp yields of 55-65% under almost all cooking conditions. In the acetic acid cooking of Pinus densiflora S. et Z., it was not cooked at a low temperature. The strength properties of the acetic acid pulps from Pinus tomentiglandulosa T. Lee showed the optimum with 95% acetic acid concentration at $185^{\circ}C$ maximum cooking temperature for 0.5hr cooking time. The strength properties of the acetic acid pulps from Pinus densiflora S. et Z. displayed excellent tear strength in comparison with those of the other softwoods. In the process of acetic acid cooking, glucose has been removed a little, but other sugars have been eliminated. The elemental compositions and $C_9$ formulas of acetosolv lignins from Populus tomentiglandulosa T. Lee were 63.88% carbon, 5.45% hydrogen and 30.67% oxygen and $C_9H_{9.15}O_{3.24}$ The elemental compositions and $C_9$ formulas of acetosolv lignins from Pinus densiflora S. et Z. were 61.85% carbon, 6.14% hydrogen and 32.01% oxygen and $C_9H_{9.15}O_{3.50}$ The Wt. av. MWT's of the acetosolv lignins from Pinus tomentiglandulosa T. Lee and Pinus densiflora S. et Z. were 731 and 725.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.4
• /
• pp.61-67
• /
• 1997

The bending performances of sloped finger-joints in Pinus densiflora S. et Z. were tested in order to improve the strength properties of finger-joint Sloped finger-cut pieces were jointed with four kinds of adhesives(resorcinol-phenol, oilic urethane, polyvinyl acetate, and polyvinyl-acryl acetate resin). The slope ratios of finger joints were 0, 0.5, 1.0, 2.0. The MOE, MOR and defletion to maximum load in bending of sloped finger-joints and solid wood specimen were measured. The results were: 1. The efficiencies of MOE to finger and sloped finger-joints were 82% or greater in every kind of adhesives except polyvinyl-acryl acetate resin adhesive and there were some effect of slope on the MOE in a sloped finger-joint for polyvinyl-acryl acetate and oilic urethane resin adhesives. 2. The effects of slope on the MOR to sloped finger-joints were showed in every kind of adhesive, because the efficiencies of MOR increased with increasing slope ratio in sloped finger-joints. The efficiencies of MOR to slope ratios of 0 and 2.0 ranged 43~65% and 76~82%, respectively. There was almost no effect of the kinds of adhesives on the MOR to the slope ratio of 2.0. 3. It was found impossible to estimate the bending strength of sloped finger-jointed Pinus densiflora S. et Z. by using MOE. The correlation coefficient(0.124) between MOE and MOR was very low and not significant at 5% level.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.27-32
• /
• 1997

This study was carried out to find the relationship between anatomical characters and compression strength parallel to grain of Pinus densiflora S. et. Z., the representative conifer species in Korea. The results were as follows ; 1. The compression strength parallel to grain increased with the increase of tracheid length and wall thickness. The strength, however, decreased with the increase of height of uniseriate ray and microfibril angle. 2. The major factors affecting compression strength parallel to grain in heartwood were radial diameter of latewood tracheid and wall thickness of earlywood tracheid but length and tangential diameter of latewood tracheid were the important factors in sapwood.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.42-49
• /
• 1988

Anatomical characteristics on abnormal type of bisected compression woods and light colored wood intervened between these dark colored compression woods on under part and their respective opposite woods on upper parts of cross section in Pinus densiflora S. et Z. stem were compared through optical microscopic investigation. and the obtained results were summarized as follows: 1. Tracheid length increased linearly as the number of rings from the pith increases in all investigated parts, but increasing tendency in tracheid length was similar within bisected two compression woods and their opposite woods. 2. Tracheids were the shortest in bisected two compression woods and tracheid length in intervened wood between these two compression woods was longer than in compression woods but shorter than in the opposite woods. 3. Bisected two compression woods and intervened wood between these two compression woods revealed similar features in tracheid transition from springwood to summerwood, intercellular space, tracheid entanglement, and cross sectional view of tracheid. but spiral check was observed only in these two compression woods, therefore the intervened wood between these two compression woods disclosed anatomical characteristics similar to, not typical of, compression woods.

• Korean Journal of Plant Resources
• /
• v.20 no.6
• /
• pp.540-543
• /
• 2007

We have investigated the vegetation in the peninsula located in Ongjeong-Li Seomyeon in Youngweol-gun. Since this is a limestone area, boxtrees, Abelia mosanensis T. H. Chung ex Nakai, and Selaginella stauntoniana Spring were abundant, as these are types of vegetation characteristic of limestone areas. Pinus densiflora S. et Z. was the most dominant woody plant, but vegetational changes, such as the dominance of Quercus variabilis Blume, Quercus dentata Thunb, and Quercus mongolica Fischer, were observed in spots. In particular, the growth of nursery plants of pinus densiflora S. et Z. was not observed, and young trees like Quercus mongolica Fischer grow as low vegetation of Pinus densiflora S. et Z.. Thus, the ecological succession of Quercus mongolica Fischer is predicted. Outside the investigation area, as herbaceous plants, various vegetations were observed, including Selaginella stauntoniana Spring, Thalictrum coreanum H. Lev., Mukdenia rossii(Oliv.) Koidz., Platanthera freynii Kraenzl., Cephalanthera longibracteata Blume, Potentilla dickinsii Franch., Patrinia rupestris(Pall.) Juss., Swertia pseudochinensis H. Hara, Vicia venosa(Willd.) Maxim., Pyrola japonica Klenze ex Alef., Disporum smilacinum A. Gray, Artemisia stolonifera(Maxim.) Kom. for. Stolonifera, Smilax nipponica Miq., Adenophora triphylla var. japonica(Regel) H. Hara, Isodon inflexus(Thunb.) Kudo, Gentiana scabra Bunge for. Scabra, Polygonatum odoratum var. pluriflorum(Miq.) Ohwi, Dioscorea quinqueloba Thunb., Syneilesis palmata(Thunb.) Maxim., Asparagus schoberioides Kunth, Eupatorium japonicum Thunb. ex Murray, Galium kinuta Nakai & Hara, Saxifraga fortunei var. incisolobata, Lilium amabile Palib., Siberian iris, Dictamnus dasycarpus Turcz., Atractylodes ovata(Thunb.) DC., and Lysimachia clethroides Duby.

• Korean Journal of Environment and Ecology
• /
• v.21 no.3
• /
• pp.257-277
• /
• 2007

We carried out a phytosociological study on pine forests in Korea with the method of Zurich-Montpellier School. We collected the data of 252 $relev{\acute{e}}s$ from 45 sites in the pine forests throughout the Korean Peninsula and its attached islands. The vegetation of the pine forests was classified into one association, three communities and seven subcommunities as follows: A: Quercus mongolica-Pinus densiflora community, A-1: Typical subcommunity, A-2: Vaccinium korean urn subcommunity, A-3 : Rhododendron micranthum subcommunity, B: Quercus serrata-Pinus densiflora community, B-1: Typical subcommunity, B-2: Juniperus rigida subcommunity, B-3: Styrax japonica subcommunity, B-4: Eurya japonica subcommunity, C: Saso-Pinetum densiflorae Yim et al. 1990, and D: Castanopsis cuspidata var. sieboldii-Pinus densiflora community. The former three communities were integrated into the Lindero-Quercion mongolicae Kim 1990 em. 1992. The Castanopsis cuspidata var. sieboldii-Pinus densiflora community remained to be studied in future to determine the association. The communities of Quercus mongolica-Pinus densiflora community was distributed throughout the montane zone in central-northern part of the Korean Peninsula. Quercus serrata-Pinus densiflora community occupied widely in the sub-montane and hilly areas in central and Southern Korean Peninsula. The association of Saso-Pinetum densiflorae was found in Cheju Island. Castanopsis cuspidata var. sieboldii-Pinus densiflora community were distributed in the warm-temperate zone including islands off the south-west coast of the Peninsula.