• 제목/요약/키워드: Pinned-joint

검색결과 19건 처리시간 0.025초

단층래티스돔의 좌굴특성에 미치는 형상초기부정에 관한 연구 (II) (제II보 핀접합의 경우) (Study on Buckling-Characteristics of Single-Layer Latticed Domes subject to Initial Imperfection (II) (Part II In the case of Pinned-Joint))

  • 정환목;권영환
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1993년도 가을 학술발표회논문집
    • /
    • pp.74-78
    • /
    • 1993
  • Compared with rigid-jointed latticed dome, in pinned-joint latticed dome, results of Ref.1 showed reduction of buckling strength by decline of junction's rotational rigidity. Moreover, with decline of junction's rotational rigidity, geometrical initial imperfection incurs more and more reduction of buckling-strength. This study, subsequently the case of rigid-joint domes, is aimed at analyzing buckling-characteristics of pinned-joint single-layer latticed domes with triangular network subjected to initial imperfection.

  • PDF

저온환경에서 복합재료 핀 연결부의 Bearing 강도에 관한 연구 (A Study of Bearing Strength on Composite Pinned-Joint at Low Temperature)

  • 허남일;이상연;김재훈;이영신;사정우;조승연;임기학;오영국;최창호;도철진;권면;이경수
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.413-418
    • /
    • 2001
  • Fundamental failure mode in a laminated composite pinned-joint is proposed to assess damage resulting from stress concentration in the plate. The joint area is a region with stress concentrations thus a complicated stress state exists. The modeling of damage in a laminated composite pinned-joint presents many difficulties because of the complexity of the failure process. In order to model progressive from initial to final, finite element methods are used rather than closed form stress analyses. Failure analysis must be a logical combination of suitable failure criteria and appropriate material properties degradation rules. In this study, the material properties which were obtained in previous study, the preparing process of the bearing strength test for a pinned joint CFRP composite plate subjected to in-plane loading at low temperature, and the FEM result of progressive damage model using ANSYS program are summarized to assess the structural safety of CFRP plate used in the magnetic supporting post of KSTAR(Korea Superconducting Tokamak Advanced Research).

  • PDF

반강접 접합부를 갖는 강골조의 거동에 대한 해석적 연구 (An Analytical Study on the Behavior of Steel Frames with Semi-Rigidity of Beam-to-Column Connections)

  • 김종성
    • 한국강구조학회 논문집
    • /
    • 제15권5호통권66호
    • /
    • pp.551-559
    • /
    • 2003
  • 강골조의 보-기둥 접합부에 대한 해석과 설계는 일반적으로 완전한 강접이나 마찰이 없는 완전한 핀접합으로 가정하는 것이 보통이다. 이러한 경우, 구조해석 및 설계과정을 단순화시키는 장점은 있으나, 실제 철골 접합부에서는 작용하중에 대하여 어느 정도의 모멘트 전달과 회전구속력을 갖는 반강접으로 해석해야 하므로 실제와는 다소 차이가 날 수 있다. 이에, 본 연구에서는 고정계수에 의한 기둥-보 접합부의 반강접성과 P-delta효과를 고려한 골조의 비선형 해석 프로그램을 작성하고, 수치해석을 통해 평면 강골조의 변형과 내력에 미치는 접합강성의 영향을 검토하였으며, 상용의 해석프로그램인 MIdas Gen과 비교하였다.

접합부 강성변화를 고려한 단층 래티스 돔의 좌굴해석 (Buckling Analysis for Single Layer Latticed Domes considering the Change of Joint Rigidity)

  • 이후진;권택진
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.337-344
    • /
    • 2001
  • This paper is concerned with the change of joint rigidity in estimating the degree of semi-rigidity of connections and the buckling load in a single layer latticed dome. The estimations are based on information about the ratio for the rotational stiffness of the connection to the flexural stiffness of the member and the minimum eigenvalue of a structure for pinned, semi-rigid and completely rigid cases, respectively. Connection characteristics are reflected in the ratio control of joint rigidity for the DOFs to be related using the spring element by FEM.

  • PDF

극저온 지지구조물을 위한 CFRP 적층판의 핀 체결부 강도특성 연구 (A Study on the Strength Characteristics of the Pin Jointed CFRP Composites for Cryogenic Supporting Structure)

  • 허남일;김재훈;이영신;김학근;박주식;권면
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2002년도 학술대회 논문집
    • /
    • pp.173-176
    • /
    • 2002
  • Fundamental failure mode in a laminated composite pinned joint is proposed to assess damage resulting from stress concentration in the plate. The joint area is a region with stress concentrations thus a complicated stress state exists. The modeling of damage in a laminated composite pinned joint presents many difficulties because of the complexity of the failure process. In this study, the effect on the bearing strength of the pin jointed Carbon Fiber Reinforced Plastics (CFRP) composites for magnet support structure of KSTAR tokamak with various parameters such as edge distance to diameter, width to diameter, and the temperature of $23^{\circ}C$, $-76^{\circ}C$, and $-196^{\circ}C$ was examined by comparing the experimental results with finite element analysis.

  • PDF

금속 핀으로 보강된 복합재 단일겹침 체결부의 강도 연구 (Strength of Stainless Steel Pin-reinforced Composite Single-lap Joints)

  • 이병희;박용빈;권진회;최진호;최익현;장성태
    • Composites Research
    • /
    • 제25권3호
    • /
    • pp.65-69
    • /
    • 2012
  • 본 논문에서는 금속 핀으로 보강된 일체성형 복합재 단일겹침 체결부에 대해, 보강 핀이 체결부의 파손거동에 미치는 영향을 시험으로 연구하였다. 핀의 지름(0.3, 0.5, 0.7 mm)과 밀도(0.5, 2.0, 4.0%)를 달리하여 총 6종류의 시편을 제작하였다. 복합재료와 보강핀은 각각 Toray사의 일방향 탄소-에폭시 프리프레그 T700-12K-31E#2510와 스테인리스 강이다. 핀 밀도가 매우 낮은 한 경우(0.5%)를 제외하고는, 모든 체결부에서 두께방향 핀의 보강으로 인해 초기균열의 발생이 더 빨라지는 것으로 나타났다. 그러나 극한강도는 최대 45%까지 증가하고, 특히 접착면의 완전한 분리 후에도 대변형 상태에서 핀이 추가적인 하중을 지지함으로써, 구조물이 안정적 파괴거동을 갖도록 하는 것을 확인하였다.

Modelling and classification of tubular joint rigidity and its effect on the global response of CHS lattice girders

  • Wang, Wei;Chen, Yiyi
    • Structural Engineering and Mechanics
    • /
    • 제21권6호
    • /
    • pp.677-698
    • /
    • 2005
  • In engineering practice, tubular connections are usually assumed pinned or rigid. Recent research showed that tubular joints may exhibit non-rigid behavior under axial or bending loads. This paper is concerned with establishing a new classification for tubular joints and investigating the effect of joint rigidity on the global behavior of CHS (Circular Hollow Section) lattice girders. Parametric formulae for predicting tubular joint rigidities are proposed, which are based on the finite element analyses through systematic variation of the main geometric parameters. Comparison with test results proves the reliability of these formulae. By considering the deformation patterns of respective parts of Vierendeel lattice girders, the boundary between rigid and semirigid tubular connections is built in terms of joint bending rigidity. In order to include characteristics of joint rigidity in the global structural analysis, a type of semirigid element which can effectively reflect the interaction of two braces in K joints is introduced and validated. The numerical example of a Warren lattice girder with different joint models shows the great effect of tubular joint rigidities on the internal forces, deformation and secondary stresses.

H형강보.각형강관기둥 접합부의 연성도를 고려한 골조의 거동에 관한 연구 (A Study on the Behavior of Frame with Connections between H-Beams and S . H . S Columns considering Joint Flexibility)

  • 강석봉;김이두;박순규;김재훈
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1997년도 봄 학술발표회 논문집
    • /
    • pp.211-218
    • /
    • 1997
  • Analysis of structures are usually executed under the assumption that connections are either ideally pinned joint or fully rigid joint. But in general all structures is connected under the semi-rigid connections. Semi-rigid connect ions have demerits that is simplification work on connection's behavior, moment-rotation relationships of connect ions , apprehension of nonlinear analysis etc. On the other hand there is merits that is improvements of serviceability, economic efficiency, construction in predicting real behavior frames. This study is to make model of connect ions by based on experimental study and after analysis on frames considering characteristics of semi-rigid connections. semi-rigid connection's influence on the behavior of structures and fundamental data on application of structures that is connected between S H S column and H beam is exhibited.

  • PDF

목재 접합부의 강도특성 및 장기 내력 평가 (I) - 소나무재의 Bo1t 및 Drift pin 접합부 능력(耐力) 성능 평가 - (Studies on Evaluation for Long-term Loading of Composite Wood-joint and Characteristics of Joint Strength (I) - The strength properties of mechanical joints of Pinus densiflora with drift pin and bolt -)

  • 홍순일;황원중;김은삼;진광성
    • Journal of the Korean Wood Science and Technology
    • /
    • 제29권4호
    • /
    • pp.1-8
    • /
    • 2001
  • 본 실험은 강판삽입형에 드리프트 핀, 볼트를 이용한 2가지 형태의 접합부의 강도 특성을 검토하였다. 하중 방향은 섬유평행방향 하중 (0도 하중)과 섬유직교방향 하중 (90도 하중)을 가하여 하중방향의 차이 및 접합구에 따른 강도 특성을 비교하였다. 소나무재의 강판 삽입의 드리프트 핀, 볼트 인장형 전단강도 실험에서 다음과 같은 결과를 얻었다. 1. 같은 단거리의 섬유평행방향 하중시 최대하중은 접합구의 직경이 증가함에 따라 증가되는 경향을 보였으며, 90도 하중인 경우 드라프트핀, 볼트 접합부는 2가지 접합구 직경(10 mm, 12 mm)에서 모든 소나무 시편이 할렬파괴 되었다. 2. 하중-변형 곡선의 초기 직선영역을 나타내는 직선과 접합구 직경의 5% 만큼을 횡축의 정방향으로 평행 이동시킨 접합부의 항복하중(Py)과 최대 하중비의 증가 정도는 0도 하중의 경우가 높고, 볼트의 접합에서 높았다. 또한 세장비가 증가될수록 높은 경향을 나타냈다. 3 항복 추정식으로 구한 항복하중과 실험값에서 5% 차감한 항복하중은 볼트 접합부에 비해 드리프트 핀 접합부가 추정치와 실험치가 잘 일치되었다.

  • PDF

요철 형상의 스테인레스강 Z-핀으로 보강된 복합재 접합 구조물의 피로강도 (Fatigue Strength of Composite Joint Structures Reinforced by Jagged Shaped Stainless Steel Z-pins)

  • 최익현;임철호
    • 한국항공우주학회지
    • /
    • 제41권12호
    • /
    • pp.967-974
    • /
    • 2013
  • 저자는 최근 산업체 생산 현장에서 Z-피닝 복합재 구조물을 간편하게 제작할 수 있는 Z-피닝 패치 개념을 제안하였고, 이를 적용하여 복합재 단일-겹침 전단 접합시편을 제작하였으며, 정적시험을 통하여 54~68%의 접합강도의 향상을 발표하였다. 본 연구는 상기 연구의 후속으로서, 반복하중에 대한 접합강도의 향상을 측정하기 위하여 피로시험을 수행하였다. 사용된 Z-핀은 스테인레스강 핀이며, 복합재료와의 결합력을 증가시키기 위하여 표면을 요철 형상으로 가공하였으며, 화학적으로 부식시켰다. 반복하중 조건에서 접합강도는 약 98~125% 향상되었다.