• Tribology and Lubricants
• /
• v.34 no.2
• /
• pp.49-54
• /
• 2018

Hydraulic reciprocating seal has been widely used to prevent fluid leakage in hydraulic systems. Also, hydraulic reciprocating seal plays a significant role to provide lubricant film at contacting interface to minimize tribological problems due to sliding with counter material. To predict lifetime of hydraulic reciprocating seal, quantitative understanding of wear characteristics with respect to operating conditions such as normal force and sliding speed is needed. In this work, effect of sliding speed on wear of polyurethane (PU) hydraulic reciprocating seal were experimentally investigated using a pin-on-disk tribo-tester. The wear characteristics of PU specimens were quantitatively determined by comparing the confocal microscope data before and after test. It was found that the wear rate of PU specimens decreased from $4.9{\times}10^{-11}mm^3$ to $1.1{\times}10^{-11}mm^3/Nm$ as sliding speed increased from 120 mm/s to 940 mm/s. Also, it was observed that the friction decreased slightly as the sliding speed increased. Improvement of lubrication state with increasing sliding speed was likely to be responsible for this enhanced friction and wear characteristics. This result also suggests that decrease in sliding distance between PU elastomer and counter materials at lower sliding speed is preferred. Furthermore, the quantitative assessment of wear characteristics of PU specimen may be useful in prediction of lifetime of PU hydraulic reciprocating seal if the allowed degree of wear for failure of the seal is provided.

• Journal of Veterinary Clinics
• /
• v.34 no.4
• /
• pp.287-290
• /
• 2017

A 6-month-old, 4.1 kg female Dachshund dog presented with intermittent non-weight bearing lameness of the right thoracic limb. Radiographs revealed caudolateral luxation of the right radial head and a shortened right ulna compared to the contralateral limb. Bone lengthening by distraction of the ulna using the Ilizarov technique was performed following ulnar osteotomy. The rate of distraction was 1.5 mm per day, adjusted a total of 3 times daily for a total distraction distance of 10 mm. The Ilizarov fixator was removed four weeks after surgery. The patient showed knuckling due to radial nerve injury that occurred during limb-lengthening. Corrective osteotomy was performed using a plate and pin for the luxation and deformity of the right radial head. The luxation of the radial head was successfully reduced following surgery. However, the knuckling persisted after surgery. Rehabilitation for radial nerve injury was performed using heat therapy, massage, a passive range of motion exercises, water treadmill exercises, neuromuscular electrical stimulation, leash-walking, and acupuncture. 15 months after surgery, the patient showed satisfactory weight-bearing ambulation without recurrence of lameness. The use of the Ilizarov technique is a good surgical option for the treatment of a patient with congenital elbow luxation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.8
• /
• pp.153-165
• /
• 1995

The design procedure of a GaAs/AlGaAs semiconductor matrix optical switch is presented for a simplified tree architecture in the viewpoint of optical loss. A low loss, 0.537 dB/cm, pin type substrate is designed by considering the loss due to imputity doping at 1.3 $\mu$m wavelength. The operating voltage and the device length of a reversed ${\Delta}{\beta}$ electro-optic directional coupler(EODC) swith which is a cross-point device of the 4${\times}$4 matrix optical switch and the bending loss of rib waveguide are caculated as functions of waveguide parameters and bending parameters. There is an optimum bending radius for some waveguide parameters. It is recommened that higher optical confinement conditions such as wide waveguide width and higher rib-height should be chosen for structural parameters of a low loss and a process insensitive 4${\times}$4 matris optical switch. A 4${\times}$4 optical matrix switch which has a 3 dB loss and a 12 volt operating voltage is designed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.816-821
• /
• 2013

This paper reports numerical study results with respect to the thermal performance of various hybrid fins (HFs) and a pin fin (PF) passively cooled under natural convection state. Investigated HFs are a basic hybrid fin (BHF), a hollow hybrid fin (HHF), and a solid hybrid fin (SHF). CFD models for both HFs and the PF have been developed to explore their thermal performance under various heat dissipations. Thermal performances of fins have been analyzed by quantifying array-based heat transfer coefficients, $h_a$, and mass-based heat transfer coefficients, $h_m$, for each fin. Study results show that $h_a$ of the SHF is 23% greater than that of the PF. $h_m$ of the HHF is found to be even 140% greater than that of the PF, and the HHF is found to be 40% better than the BHF in terms of the mass-based performance, $h_{m{\cdot}}$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.4
• /
• pp.514-521
• /
• 2018

Objective: This experiment was conducted to investigate the effects of crude glycerin from waste vegetable oil (CGWVO) on performance, carcass traits, meat quality, and muscle chemical composition. Methods: Twenty-four crossbred (Thai Native${\times}$Anglo Nubian) uncastrated male goats ($16.8{\pm}0.46kg$ body weight [BW]) were assigned to a completely randomized design and subjected to four experimental diets containing 0%, 2%, 4%, and 6% of CGWVO (63.42% of glycerol and 47.78% of crude fat) on a dry matter (DM) basis. The diets were offered ad libitum as total mixed rations twice daily. The feed intake, feeding behavior, growth performance, carcass and meat traits, and muscle chemical composition were evaluated. Results: Based on this experiment, there were significant differences (p>0.05) among groups regarding DM intake, growth performance, and carcass traits where goats receiving 6% of CGWVO had lower daily DM intake, growth performance, and carcass traits than those fed on 0%, 2%, and 4% of CGWVO. There were no effects of CGWVO on carcass length, carcass width, Longissimus muscle (LM) area, Warner-Bratzler shear force, pH and color of LM at 45 min after slaughter, as well as on other carcass cut and muscle chemical composition. Conclusion: In conclusion, the addition of up to 4% of DM in the diets for crossbred finishing goats seems to be the most interesting strategy, since it promotes greatest animal performance. Moreover, this study was a suitable approach to exploit the use of biodiesel production from waste vegetable oil for goat production.

• The korean journal of orthodontics
• /
• v.45 no.5
• /
• pp.245-252
• /
• 2015

Objective: To assess the labial and lingual alveolar bone thickness in adults with maxillary central incisors of different inclination by cone-beam computed tomography (CBCT). Methods: Ninety maxillary central incisors from 45 patients were divided into three groups based on the maxillary central incisors to palatal plane angle; lingual-inclined, normal, and labial-inclined. Reformatted CBCT images were used to measure the labial and lingual alveolar bone thickness (ABT) at intervals corresponding to every 1/10 of the root length. The sum of labial ABT and lingual ABT at the level of the root apex was used to calculate the total ABT (TABT). The number of teeth exhibiting alveolar fenestration and dehiscence in each group was also tallied. One-way analysis of variance and Tukey's honestly significant difference test were applied for statistical analysis. Results: The labial ABT and TABT values at the root apex in the lingual-inclined group were significantly lower than in the other groups (p < 0.05). Lingual and labial ABT values were very low at the cervical level in the lingual-inclined and normal groups. There was a higher prevalence of alveolar fenestration in the lingual-inclined group. Conclusions: Lingual-inclined maxillary central incisors have less bone support at the level of the root apex and a greater frequency of alveolar bone defects than normal maxillary central incisors. The bone plate at the marginal level is also very thin.

• Biomedical Science Letters
• /
• v.6 no.1
• /
• pp.1-9
• /
• 2000

To identity the genes responsible for the biosynthesis of exopolysaccharide, recombinant plasmids pUEX10 and pLEX10 were constructed from plasmid pLEX3 which was isolated from the recombinant cosmid library of Zoogloea ramigera 115. The complete nucleotide sequence of the 1.7 kb genomic DNA insert in plasmid pUEX10 was determined. Its analysis identified two open reading frames (ORF3 & ORF4) which could encode two proteins. The amino acid sequence derived from ORF3 showed the homology with gumC protein in Xanthomonas campestris as well as exoP protein in Rhizobium melizoti. The partial amino acid sequence of ORF4 showed the homology with polysaccharide export protein in Thermotoga maritima. Z. ramigera 115SLR and Z. ramigera 115SLR/pLEX10 showed the similar pattern for EPS production. Yield of exopolysaccharides produced by Z. ramigera 115SLR and Z. ramigera 115SLR/pLEX10 was 0.26% (w/v) and 0.16% (w/v), respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.5
• /
• pp.906-912
• /
• 2017

In this paper, we studied a design method for a broadband 3-element quasi-Yagi antenna (QYA) for indoor digital television (DTV) reception. The proposed QYA employs a novel balun between a microstrip (MS) line and a coplanar strip (CPS) line feeding the driver dipole. The proposed balun is constructed by connecting the end of MS line to CPS line through a shorting pin, and the CPS and ground reflector are connected through a circular ring-type conductor. An antenna, as an design example for the proposed antenna, is designed for the operation in the frequency band of 470-806 MHz for terrestrial DTV. The antenna fabricated on an FR4 substrate with a size of $270mm{\times}150mm$ showed a good performance such as a frequency band of 470-820 MHz for a voltage standing wave ratio < 2, a gain > 4.0 dBi, and a front-to-back ratio > 8.4 dB over the DTV frequency band.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.85-91
• /
• 2010

In this paper, a new microstrip antenna using asymmetric U-shaped slotted ground is proposed for a switchable circular polarization sense. The proposed antenna is achieved a circularly polarization from orthogonal E-field distributions with 90 degree phase difference due to the asymmetrical U-shaped slot. Moreover, the circular polarization sense of the proposed antenna can be easily switchable with changing the symmetric plane of the U-shaped slots. As a result, the proposed antenna is implemented by two PIN diodes with two different bias condition for ON/OFF states. The measured axial ratios are about 1.5 dB without the dependence of the polarization sense and 3-dB axial ratio bandwidth are achieved 29 MHz with respect to about 1.2 % at 2.46 GHz operating frequency.

• Clinics in Shoulder and Elbow
• /
• v.14 no.1
• /
• pp.80-83
• /
• 2011

Purpose: Traumatic posterior dislocation of the shoulder in a child is extremely rare, and posterior dislocation of the shoulder concomitant with ipsilateral humeral surgical neck fracture has not been reported in a child previously in Korea. Materials and Methods: The authors treated a 10-year-old with posterior dislocation of left shoulder and an ipsilateral humeral surgical neck fracture, that occurred during Taekwondo practice, by open reduction of the shoulder and pin fixation under general anesthesia. Results: A normal range of motion with complete union and good remodeling was achieved without redislocation or avascular necrosis of humeral head at 1 year after surgery. Conclusion: The authors report a successfully treated case of traumatic posterior dislocation of the shoulder with an ipsilateral humeral surgical neck fracture in child.