• Food Science and Biotechnology
• /
• v.18 no.4
• /
• pp.917-922
• /
• 2009

This study investigated the effects of steaming on the antioxidative activities of ray hydrolysates in vitro. Based on the results of 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay, steamed ray hydrolysate possessed significantly higher antioxidative activities than raw ray hydrolysates (p<0.05). The 2,2-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging activity of steamed ray hydrolysate by pancreatin was slightly lower than raw ray hydrolysate at all concentrations. Raw ray hydrolysate displayed moderate hydroxyl radical scavenging activity, while steamed ray hydrolysate showed a greater increase in hydroxyl radical scavenging activity than raw ray hydrolysate at concentrations above 21.33 mg/mL, and it reached 58.21% at 42.67 mg/mL. The results of this study show that ray hydrolysates have potent free radical scavenging activities and reducing power, and the steaming has a partial impact on the antioxidative activity of ray hydrolysates.

• Structural Engineering and Mechanics
• /
• v.68 no.4
• /
• pp.423-442
• /
• 2018

In this paper, masonry infilled reinforced concrete (RC) frames are analyzed through a probabilistic approach. A macro-modeling technique, based on an equivalent diagonal pin-jointed strut, has been resorted to for modelling the stiffening contribution of the masonry panels. Since it is quite difficult to decide which mechanical characteristics to assume for the diagonal struts in such simplified model, the strut width is here considered as a random variable, whose stochastic characterization stems from a wide set of empirical expressions proposed in the literature. The stochastic analysis of the masonry infilled RC frame is conducted via the Probabilistic Transformation Method by employing a set of space transformation laws of random vectors to determine the probability density function (PDF) of the system response in a direct manner. The knowledge of the PDF of a set of response indicators, including displacements, bending moments, shear forces, interstory drifts, opens an interesting discussion about the influence of the uncertainty of the masonry infills and the resulting implications in a design process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2615-2618
• /
• 2009

Double rectangular patch with 4-bridges is investigated for solution of IEEE 802.11b/g (2.4 GHz) and 802.11a (5.5 GHz). Rectangular patch for 5.5 GHz frequency band is printed on the PCB substrate and connected to another rectangular patch for 2.4 GHz frequency band with 4-bridges to obtain dual band operation in an antenna element. 4-bridges can modify the desired frequency band from its original frequency band by changing its width. Gain of 2.4 GHz patch is 5 dBi and 5.5 GHz patch is 3.7 dBi at ${\theta}=0^{\circ}$.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.2
• /
• pp.161-168
• /
• 2000

Plasmid pLEX3 isolated from the recombinant cosmid library of Zoogloea ramigera 115 was found to be responsible for the restoration of the rugose colony phenotype. To confirm the essential region responsible for the complementation, subclones were constructed from plasmid pLEX3 and transformed into mutant strain Z. ramigera 115SLR. The recombinant plasmids pLEX10 and pLEX11 were shown to complement the slime-forming property of Z. ramigera 115SLR. In a compositional analysis of the exopolysaccharides from Z. ramigera 115, Z. ramigera 115SLR, and Z. ramigera 115SLR harboring plasmid pLEX11, the exopolysaccharides showed a similar composition with glucose, galactose, and side chain groups. The complete nucleotide sequence of the 3.25kb genocim DNA insert in plasmid pLEX11 was determined and its analysis identified two open reading frames which could encode two proteins. The gene products derived form the two open reading frames were confirmed by and in vivo transcription using a T7-RNA polymerase. The ORF1 produced a 30 kDa protein, whereas the ORF2 was found responsible for the complementation of the morphological mutation and produced a 14 kDa protein. An in vivo gene expression of plasmid pTEX10 showed another open reading frame encoding a 50 kDa protein. The gene products form ORF1 and ORF2 are regarded as novel proteins which do not show any homology with other proteins.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.3
• /
• pp.291-293
• /
• 2010

We report a case of pseudoaneurysm of the parietal division of the superficial temporal artery (STA) secondary to iatrogenic head injury due to Gardner traction. A 54-year-old man presented with a pulsatile, cystic, and painless mass in the right anterior temporal region which developed three weeks after head fixation via Gardner traction. At the time of discovery, the mass was 10 mm in diameter, compressible and disappeared after manual compression of the proximal STA. A bruit was audible over the mass, which was thought to be a pseudoaneurysm. A computed tomography angiogram (CTA) showed a pseudoaneurysm of the parietal division of the right ST A. The tip of the pseudoaneurysm was thrombosed and was both red and tender. The pseudoaneurysm was thought to be filled with infected thrombus, and the mass was resected with ligation of the proximal and distal ends of the STA. A pseudoaneurysm of the STA should be suspected when there is a history of possible vessel injury, such as a history of head-pin fixation, and when a patient presents with a pulsatile, cystic mass near the temple. Pseudoaneurysms can be successfully treated by excision.

• The Korean Journal of Mycology
• /
• v.45 no.4
• /
• pp.328-335
• /
• 2017

In this study, we made a population with high biological efficiency (BE) to investigate the complex genetic architecture of yield-related traits in Agaricus bisporus. MB-013 crossed between bisp 015-p2 and bisp 034-p2, had high BE. Additionally MB-013 was an intervarietal hybrid that intercrosses with A. bisporus var. burnettii, bisp 015, and A. bisporus var. bisporus, bisp 034. One hundred and seventy homokaryons were selected using the cleaved amplified polymorphic sequence (CAPS) markers (PIN primer/HaeIII) from 300 single spore isolates (SSIs). One hundred $BC_1F_1$ hybrids were obtained by crossing the homokaryons of MB-013 with bisp15-p1. The population of 100 BC1F1 hybrids is suitable for analyses of BE.

• Tribology and Lubricants
• /
• v.27 no.2
• /
• pp.88-94
• /
• 2011

The tribological characteristics of the swash plate surface of a compressor which is for automobile were investigated. For surface treatments, PTFE and $MoS_2$ are used as a solid lubricant, together with copper alloy. Test condition is set considering actual driving condition. Wear testing is conducted using pin on disk type tester, and the coefficient of friction and the temperature on friction surface are measured. Also, to determine the wear patterns, cross-section of friction surface is analyzed by SEM(scanning electrode microscope). The $MoS_2$, both at dry and lubricated conditions, friction surface and the coefficient of friction maintained rather stable results. But, the PTFE, at oil less condition, sample resulted in rather unstable condition. In case of copper alloy, quite higher friction coefficients(higher than 0.1) were obtained at dry condition. At the temperature of $125^{\circ}C$, seizure has occurred.

• Tribology and Lubricants
• /
• v.29 no.6
• /
• pp.372-377
• /
• 2013

This study investigated the interface temperatures for the sliding friction of three types of pins fabricated with thermocouple wires by the suction casting method. Optical microscopy was used to examine the surrounding material state at the bonding interface with the thermocouple wires. Friction tests were performed under dry sliding conditions against stainless steel 304 at nominal stresses of 1.42-4.25 MPa and sliding speeds of 0.5-1.25 m/s. Tribological data were collected using a custom-made pin-on-disk apparatus that measured the interface temperature and corresponding friction coefficient. Static tests were performed to demonstrate the functionality and reliability of the thermocouple wires-combined temperature sensor (TCTS). Each TCTS showed good linearity and sensitivity and very similar response times for the thermocouple and critical temperature during sliding friction.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.834-837
• /
• 2005

In this paper, we describe the method of non-invasive blood pressure measurement using pulse wave transit time(PWTT). PWTT is a new parameter involved with a vascular that can indicate the change of BP. PWTT is measured by continuous monitoring of ECG and pulse wave. No additional sensors or modules are required. In many cases, the change of PWTT correlates with the change of BP. We measure pulse wave using the photo plethysmograph(PPG) sensor in an earlobe and we measure ECG using the ECG monitoring device our made in the chest. The measurement device for detecting pulse wave consists of infrared LED for transmitted light illumination, pin photodiode as light detector, amplifier and filter. We composed 0.5Hz high pass, 60Hz notch and 10Hz low pass filter. ECG measurement device consists of multiplexer, amplifier, filter, micro-controller and RF module. After amplification and filtering, ECG signal and pulse wave is fed through micro-controller. We performed the initial work towards the development of ambulatory BP monitoring system using PWTT. An earlobe is suitable place to measure PPG signal without the restraint in daily work. From the results, we can know that the dependence of PWTT on BP is almost linear and it is possible to monitoring an individual BP continuously after the individual calibration.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.483-491
• /
• 2015

This paper describes the design optimization of parasitic elements used for TACAN broadband antenna. We deployed parasitic elements arranged in a circular array to electronically rotate the antenna instead of employing a mechanically rotated antenna to generate the composite radiation pattern of 15 Hz and 135 Hz including bearing information and to meet the harmonic contents specification of MIL-STD-291C. We performed the simulation for optimization of the parasitic elements and fabricated the antenna composed of 16 parasitic elements of 15 Hz and 63 parasitic elements of 135 Hz. With harmonics magnitude reduction by increasing the number of steps using vector composition of the reflectors, the measured result meets the specification of MIL-STD-291C.