• Tribology and Lubricants
• /
• v.34 no.6
• /
• pp.284-291
• /
• 2018

Ball-milling for reactant powders in advance and using an induction heating system for Ni-Al intermetallic coating process are known to enhance the reactivity of combustion synthesis. In this work, the effects of the charging weight ratio of ball to powder in ball-milling for reactant Ni-Al powders and the synthesizing temperature in induction heating on sliding wear behavior of the coating layers are investigated. Sliding wear behavior of the coating layers is examined against a tool steel using a pin-on-disc type sliding wear machine. As results, wear of the coating layer ball-milled without ball was severely worn out at the sliding speed of 2m/s, regardless of the synthesizing temperature in induction heating. However, the wear rate of the coating layers at the sliding speed was remarkably decreased with increasing the charging weight ratio of ball in ball-milling for reactant powders. This can be explained by the fact that the void in the coating layer is disappeared and the coating layer is densified by the ball-milling. The evidence showed that pitting damages were disappeared on the worn surface of ball-milled coating layer. Consequentially, the Ni-Al intermetallic coating layer could have better wear resistance at all sliding speed ranges with the ball-milling for reactant powders in advance.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1314-1321
• /
• 2019

In case of multiple failure scenario, such as LOCA with ECCS failure, the decay heat continues to raise the reactor core temperature, eventually leading to the core voiding. In such scenario the convective heat transfer becomes poor and the majority of the heat transfer from fuel bundle takes place by radiation mode. During this abnormal working condition, if the channel pressure is less than 1 MPa, the PT sags and come in contact with the CT. This results in high rate of heat transfer from contact location to moderator. The present paper aims to capture the temperature profile over a simulated nuclear channel during such scenario at a steady state temperature of $600^{\circ}C$ (Centre pin) at two different configurations of PT i.e. PT concentric with CT and PT contact with CT. The results showed that the bottom nodes of all the components (Fuel bundle, PT and CT) of the simulated channel was greatly influenced by the PT/CT contact. Moreover, higher temperature were observed at top nodes of the PT and outer pins of the fuel bundle. However, no significant variation in temperatures were obtained in fuel bundle and CT in concentric condition.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.22-29
• /
• 2019

This study conducted a research as to condensation heat transfer by using three types of flat micro multi-channel tubes with different processing of micro-fin and number of channels inside the pipes and different sizes of appearances. In addition, identical studies were conducted by using smoothing circular tubes with 5mm external diameter to study heat transfer coefficient. The condensation heat transfer coefficient showed an increase as the vapor quality and mass flux increased. However, each tube shows little differences compared to 400kg/m2s or identical in case the mass flux are 200kg/m2s and 100kg/m2s. The major reason for these factors is increase-decrease of heat transfer area that the flux type of refrigerant is exposed to the coolant's vapor with the effect of channel aspect ratio or micro-fin. In addition, the heat transfer coefficient was unrelated to the heat flux, and shows a rise as the saturation temperature gets lower, an effect that occurs from enhanced density. The physical factor of heat transfer coefficient increased as the channel's aspect ratio decreased. Additionally, the micro pin at the multi-channel type tube is decided as a disadvantageous factor to condensation heat enhancement factor. That is, due to the effect of aspect ratio or micro-fin, the increase-decrease of heat transfer area that the flux type of a refrigerant is exposed to the vapor is an important factor.

• Journal of the Korea Management Engineers Society
• /
• v.23 no.4
• /
• pp.33-48
• /
• 2018

Despite that QR codes are spreading worldwide in Pin Tech, logistics distribution, etc., South Korea is staying at the level of using QR codes in limited areas such as website connection and marketing communication. The purpose of this study is to propose measures for more effective use of QR codes by examining the effects of personal innovativeness on user's behavioral intentions by applying personal innovativeness to QR codes. To this end, this study was intended to examine the relationships between performance expectancy (PE), effort expectancy (EE), social expectancy (SE), and personal innovativeness, which are variables used in the Unified Theory of Acceptance and Use of Technology (UTAUT) model among innovative technology acceptance models, and behavioral intentions. For this study, a questionnaire survey was conducted with students in collages in the metropolitan area in May 2018 and the results were statistically verified using IBM SPSS 21. The results showed that PE, EE, and SE had significant positive(+) effects on personal innovativeness and behavioral intentions of QR code users. The mediating effects of personal innovativeness were tested and the results indicated that personal innovativeness partially mediates between PE and behavioral intentions and between EE and behavioral intentions but not between SE and behavioral intentions. The fact that since QR codes are expressed as a component to users through other media rather than its internal factors, the personal innovativeness of QR code users plays an important role in increasing the use of QR codes could be identified through this study.

• Journal of Electrodiagnosis and Neuromuscular Diseases
• /
• v.20 no.2
• /
• pp.153-158
• /
• 2018

Posterior interosseus (PI) nerve compression is a rare form of compressive neuropathy. It can cause pain along the radial nerve course and weakness of radial nerve innervating muscles without sensory symptoms. A 65-year-old man visited our institution complaining weakness of finger extension and thumb abduction after 2 times of injections at the right elbow in local clinic. The patient's clinical history and physical examination implied an iatrogenic radial nerve injury caused by the injection. The electrophysiologic study revealed of posterior interosseus neuropathy (PIN) with incomplete conduction block. However, the ultrasound study showed that the PI nerve was compressed by an anechoic cyst. The magnetic resonance imaging also confirmed of a ganglion cyst, not a hematoma. After repeated aspirations and a steroid injection, the electrophysiologic study showed recovery of motor weakness. Despite of the clue which implying an iatrogenic injury, clinician should consider other possibilities such as ganglion cysts and ultrasound guided aspiration and steroid injection could be an effective option for conservative management.

• Korean Journal of Metals and Materials
• /
• v.46 no.11
• /
• pp.725-729
• /
• 2008

Deposition characteristics of electroless plated Ni-W-P films were investigated for various complexing agents. Used complexing agents are sodium citrate, sodium gluconate and sodium malonate. In this study, the existing mixed potential theory could explain the overall mechanism of Ni-W-P electroless plating for all complexing agents. The deposition rate could be also expected by the theory. The deposited Ni-W-P films were evaluated in term of surface hardness and corrosion resistance. Microhardness of the deposit increased about 1,000 Hv after heat treatment for one hour at $400^{\circ}C$, because it was above the crystallization temperature of $Ni_3P$. The deposited Ni-W-P films can exhibit excellent corrosion resistance in using sodium malonate as a complexing agent, the other hand the using sodium gluconate was the worst corrosion resistance. The worst corrosion resistance was due to a large number of nano-sized pin-holes or small pores. The plating current at the mixed potential increases when the using sodium malonate as a complexing agent, it was explained by the cross section.

• Korean Journal of Optics and Photonics
• /
• v.32 no.1
• /
• pp.22-28
• /
• 2021

We try to extract three-dimensional information, such as the distance from a camera and the actual width and height of an object, from still photographs by a multilens smartphone camera, by means of parallax error. To obtain this information, we develop several formulas and design a method for experimental instrumentation. If the results from this paper were included in algorithms of multilens smartphone cameras, there would be various kinds of applications, such as in the workplace of architectural and civil engineering to obtain an actual dimension, or on a golf course to measure how far away a pin flag is. We expect many more applications of this study, because the multilens smartphone camera is already an important necessity of life.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.3
• /
• pp.83-91
• /
• 2021

A crawler crane, which consists of a lattice boom, a driving system, and a movable vehicle, is widely used on construction sites. The crawler crane often traverses rough terrain at these sites; as a result, an overload limiter needs to be installed on the crane to prevent it from overturning and breaking. In this paper, we studied the distributed load change in relation to boom length and the angle of rotation of the roller that comes in direct contact with the grounded track shoe. First, we developed a 3D model of a crawler crane and meshed it for finite elements. Then, we performed finite element analysis to derive the load on the roller. Finally, we graphed and examined the roller distributed load data of the case according to boom length and rotation angle. By detecting the load on the roller of the crawler crane, we can predict the potential for the crane to overturn before it happens.

• The Research Journal of the Costume Culture
• /
• v.29 no.6
• /
• pp.763-778
• /
• 2021

The study aims to analyze the mixed characteristics of knit fashion design as demonstrated in Sacai's collection, which promotes hybrid and mesh-up fusion and proposes various knit design ideas. Standards for categorizing mixed phenomena of Sacai's knit design were established through a review of literature and data analysis. The study's data collection period was from 2012 to 2021, and a total of 174 items were analyzed. The following are the results. First is the fusion of traditional knit and contemporary styles expressed through de-constructive design; traditional knit styles are combined with contemporary styles through color, material, and knitting structure mixtures, such as mixing Northern European Aran, Fair Isle, Nordic, and Ropy knit. Second, the Sakai knit design combines male and female styles by mixing materials and details. A deconstructed knit cardigan was matched with androcentric pin-striped shirts worn over layered shirring skirts embellished with chiffon and lace. Third, everyday street fashion style is blended with a formal, elegant fashion style. For example, the front view has a typical everyday appearance, whereas the back view contains florid and decorated details. The style is expressed as a 360-degrees appellation, with one thing in the front and another in the back. Sacai's distinctive expressional characteristics include a mixed and de-constructive style characterized by unexpected design.

• BMB Reports
• /
• v.55 no.4
• /
• pp.187-191
• /
• 2022

Obesity is caused by an imbalance between energy intake and energy expenditure. Exercise is attracting attention as one of the ways to treat obesity. Exercise induces 'beige adipogenesis' in white adipose tissue, increasing total energy expenditure via energy dissipation in the form of heat. Also, beige adipogenesis can be induced by treatment with a beta-adrenergic receptor agonist. We developed a Cidea-dual reporter mouse (Cidea-P2A-Luc2-T2A-tdTomato, Luciferase/tdTomato) model to trace and measure beige adipogenesis in vivo. As a result, both exercise and injection of beta-adrenergic receptor agonist induced beige adipogenesis and was detected through fluorescence and luminescence. We confirmed that exercise and beta-adrenergic receptor agonist induce beige adipogenesis in Cidea-dual reporter mouse, which will be widely used for detecting beige adipogenesis in vivo.