• 한국컴퓨터정보학회논문지
• /
• 제11권4호
• /
• pp.35-45
• /
• 2006

본 논문에서는 휴대용 회전 유도탄 체계의 모델링과 성능분석에 사용할 수 있는 실시간 병렬처리 시뮬레이터 개발에 대하여 기술한다. 실시간 병렬처리 시뮬레이터는 항공기의 적외선 형상을 만드는 탐색기 에뮬레이터, 실시간 컴퓨터, 시스템 유닛. 유도 조종 장치 및 탐색기 프로세서 등과 같은 하드웨어 실물장치와 실시간 컴퓨터에 내장된 수학적 모델, 6 자유도 모델 및 공력 모델 등을 구현한 응용 소프트웨어 및 호스트 컴퓨터에 내장된 사용자 프로그램 등으로 구성되었다. 실시간 컴퓨터는 병렬로 연결된 여섯 개의 TI사 C-40 프로세서로 설계되었으며, 기계적 장치와 결합된 아날로그 전자회로를 이용하여 탐색기 에뮬레이터를 설계하였다. 시스템 유닛은 구성 요소간의 임피던스 정합 기능과 미세 신호를 처리하며, 시뮬레이터와 실물 유도탄 발사 장치의 연결이 가능하다. 개발된 실시간 병렬처리 시뮬레이터를 휴대용 회전 유도탄의 성능분석 장치로 사용하기 위하여 현장실험을 통한 결과 검증시험을 수행하였다.

• 한국재료학회지
• /
• 제29권6호
• /
• pp.349-355
• /
• 2019

This study deals with the microstructure and tensile properties of 600 MPa-grade seismic reinforced steel bars fabricated by a pilot plant. The steel bar specimens are composed of a fully ferrite-pearlite structure because they were air-cooled after hot-rolling. The volume fraction and interlamellar spacing of the pearlite and the ferrite grain size decrease from the center region to the surface region because the surface region is more rapidly cooled than the center region. The A steel bar specimenwith a relatively high carbon content generally has a higher pearlite volume fraction and interlamellar spacing of pearlite and a finer ferrite grain size because increasing the carbon content promotes the formation of pearlite. As a result, the A steel bar specimen has a higher hardness than the B steel bar in all the regions. The hardness shows a tendency to decrease from the center region to the surface region due to the decreased pearlite volume fraction. On the other hand, the tensile-to-yield strength ratio and the tensile strength of the A steel bar specimen are higher than those of the B steel bar with a relatively low carbon content because a higher pearlite volume fraction enhances work hardening. In addition, the B steel bar specimen has higher uniform and total elongations because a lower pearlite volume fraction facilitates plastic deformation caused by dislocation slip.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.302-305
• /
• 2009

This paper examines the effect of nitride formation on formability for Cu bearing high strength extra low carbon (ELC) steel sheets. For this purpose, we have investigated the effect of addition of aluminium (Al) and boron (B) on texture and precipitation behavior of the ELC steel during continuous annealing. Mechanical properties and microstructures of the ELC steel sheets were analyzed as well using uni-axial tensile test, electron back-scattered diffraction (EBSD) technique and transmission electron microscopy (TEM) following pilot rolling and continuous annealing. It has been found that the addition of Al and B increases the precipitation of AlN and BN. What is more, the scavange of solute nitrogen is effective in increasing the formability of the ELC steels. In addition, the Al and B addition improves the aging property of the ELC steel.

• Genomics & Informatics
• /
• 제10권4호
• /
• pp.249-255
• /
• 2012

In this study, fosmid cloning strategies were used to assess the microbial populations in water from the International Space Station (ISS) drinking water system (henceforth referred to as Prebiocide and Tank A water samples). The goals of this study were: to compare the sensitivity of the fosmid cloning strategy with that of traditional culture-based and 16S rRNA-based approaches and to detect the widest possible spectrum of microbial populations during the water purification process. Initially, microbes could not be cultivated, and conventional PCR failed to amplify 16S rDNA fragments from these low biomass samples. Therefore, randomly primed rolling-circle amplification was used to amplify any DNA that might be present in the samples, followed by size selection by using pulsed-field gel electrophoresis. The amplified high-molecular- weight DNA from both samples was cloned into fosmid vectors. Several hundred clones were randomly selected for sequencing, followed by Blastn/Blastx searches. Sequences encoding specific genes from Burkholderia, a species abundant in the soil and groundwater, were found in both samples. Bradyrhizobium and Mesorhizobium, which belong to rhizobia, a large community of nitrogen fixers often found in association with plant roots, were present in the Prebiocide samples. Ralstonia, which is prevalent in soils with a high heavy metal content, was detected in the Tank A samples. The detection of many unidentified sequences suggests the presence of potentially novel microbial fingerprints. The bacterial diversity detected in this pilot study using a fosmid vector approach was higher than that detected by conventional 16S rRNA gene sequencing.

• 드라이브 ㆍ 컨트롤
• /
• 제10권4호
• /
• pp.14-21
• /
• 2013

The numerical analysis of the automatic ship mooring system which was equipped in the ship for trying to berth at the pier was performed in this study. The automatic ship mooring using hydraulic winch was a new method that had not need to change the existing devices and to help a pilot ship of outside. The numerical results of the proposed mooring system including ship motion were that the speed and rolling phenomenon of ship was affected by changing in the ship weight and affected the slope maintenance and yaw degree of ship if there has a trim of stern. Also, a static force of ship at the initial movement was important to calculate the mooring power. The moving force and inertial force of ship on the vertical direction was confirmed for the mooring stability. Therefore, the power and velocity of hydraulic mooring winch should be determined by considering the significant characteristics such as weight, velocity, inertial force and moving force of ship.

• 한국토양환경학회지
• /
• 제3권3호
• /
• pp.55-62
• /
• 1998

탄화수소계 화합물이나 중금속 잔류물 등으로 오염된 토양은 토양세척방법에 의해 효과적 으로 처리할 수 있다. 본 연구에서 토양세척공정을 개발하는데 있어 토양으로부터 오염물을 분리하기 위한 몇 가지 주요 핵심 공정기술들은 채광기술과 화학공정기술의 접목을 통하여 점차적으로 개선되어 얻어졌다. 본 파일롯 규모의 토양세척장치는 공정 상 크게 네 부분으로 이루어져 있다. 1) 기계적 마찰, 2) 세척수를 이용한 세탁작용, 3) 최종세정, 4) 오염된 세척수의 재생. 장치는 현장에서 오염토양을 시간당 5톤 속도로 처리하기 위한 규모로 설계하였다. 오염된 토양 덩어리는 먼저 1차 세척부인 회전 마찰 분쇄 관을 통과하면서 개개의 토양입자로 부셔지고 다음, 교반날이 설치된 2차 세척부에서 세척수와의 강한 마찰효과에 의해 오염물의 탈착이 이루어지게 된다. 최종 단계인 3차 세척부에선 세척된 토양을 최종적으로 물분사장치를 이용하여 세정하고 오염된 세척수와 정화된 토양을 역방향으로 분리하여 각각 배출시킨다. 세척수를 연속적으로 재사용하기 위하여 오염된 세척수는 미세토의 응집, 침전과 기름성분의 부상분리가 이루어지는 세척수 처리조를 거쳐 세척부로 다시 반송되도록 하였다. 추후 이동과 운전비용을 줄이면서 현장에 적합한 토양세척장치의 적용성을 얻기 위하여 트레일러에 탑재된 이동형 토양세척장치개발에 대한 연구를 진행할 것이다.

• 동의생리병리학회지
• /
• 제20권3호
• /
• pp.527-534
• /
• 2006

This is a pilot study to survey the general demand of senior-assistive necessities before a standardization system for senior-assistive necessities is developed as well as to describe health professionals' opinions about the demand and quality of Oriental medical aids and necessities for daily living for the elderly. This is a descriptive survey in which 29 health professionals are questioned, using structured questionnaires based on ISO 9999. The questionnaires were developed by 7 expert conduction standardization system of senior-assistive products in Korea. The data is analyzed by descriptive statistics. The result is as follows : First, with regard to the demand for all of the items in Oriental medical aids for the elderly, the demand of cupping glasses is the highest, followed by instrument used to apply heat treatment, massage equipment, thermo-therapeutic mattress, and heat or ice packs. With regard to the demand for all of the items for the necessities for daily living for the elderly, chairs are the highest, followed by rolling chairs, beds for health, and heigh adjustable beds. Second, with regard to quality of Oriental medical aids, ${\ulcorner}$aids for hair care${\lrcorner}$ are the best, whereas ${\ulcorner}$aids for boiling Oriental medicine${\lrcorner}$ are the worst. In quality of the necessities for daily living, ${\ulcorner}$chairs${\lrcorner}$ are the best, whereas ${\ulcorner}$beds${\lrcorner}$ are the worst. Above all, this result shows that with ${\ulcorner}$aids for heat or cold treatment${\lrcorner}$, there is relatively high demand and low quaily of Oriental medical aids, and with ${\ulcorner}$Beds${\lrcorner}$, there is relatively high demand and low quality. Therefore, aids for heat or cold treatment and beds in th necessities for daily living are required to be developed for standardization of senior-assistive necessities.