• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.104-110
• /
• 2010

In this study, a series of two-dimensional model test and numerical analysis was carried out to investigate the pile movement due to tunnelling in soft ground. The model test consists of 21 cases according to locations of the pile tip over the centre position of model tunnel. To identify both the pile and ground movements a close-range photogrammetric technique was adopted in the model test. The results from the model test were compared to the two-dimensional finite element analysis using the CRISP program. It was found that the rotation point on the pile was significantly affected by factors such as the offset distance from the model tunnel and the volume loss that occurred during the tunnelling operation.

• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.94-104
• /
• 1999

In order to evaluate the performance of axially of laterally loaded piles experimentaly, pile load tests can be carried out at the site Otherwise stress analyses or subgrade reaction analyses can solve the problem. In this study, stress analysis using FLAC code and subgrade reaction analyses using load transfer curves recommended by API(1993) were performed consistently on the basis of a result of site investigations, and the result of analyses was compared with the measured. As a result the behavior of pile heads was analyzed accurately for both axially and laterally loaded tests. Furthermore axially transferred loads were calculated appropriately for the measured and axial loads were transferred mainly mainly by the frictional resistance rather than by the tip resistance. Consequently, it can be commented that both analysis methods of soil-pile systems are applicable at teh objective site and that solutions may be more accurate if material properties from the site investigation are more explicit.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.9-16
• /
• 2005

The purpose of this study is to investigate the settlement characteristics of large drilled shafts embedded into bed rocks. To perform this research, 35 pile load test results for the large drilled shafts are used, because these deep foundations generally used as substructure systems for grand bridges. In case of the yield load can not be easily determined by load(P)-settlement(S) curve from the pile load test at the maximum loads, the standard settlements which can determine a yield load is established. The residual settlement equation of pile embedded in gneiss and igneous rocks is presented in this study. Also a equation is proposed to characterize the relationship between loads and elastic settlements in pile load tests on the large drilled shaft embedded into bedrock. Then, large drilled shaft's settlement characteristics are examined on pile length, pile diameter and pile's socked depth into rock at the pile tip.

• Steel and Composite Structures
• /
• 제51권4호
• /
• pp.417-440
• /
• 2024

Artificial neural networks (ANN) have been the focus of several studies when it comes to evaluating the pile's bearing capacity. Nonetheless, the principal drawbacks of employing this method are the sluggish rate of convergence and the constraints of ANN in locating global minima. The current work aimed to build four ANN-based prediction models enhanced with methods from the black hole algorithm (BHA), league championship algorithm (LCA), shuffled complex evolution (SCE), and symbiotic organisms search (SOS) to estimate the carrying capacity of piles in cold climates. To provide the crucial dataset required to build the model, fifty-eight concrete pile experiments were conducted. The pile geometrical properties, internal friction angle 𝛗 shaft, internal friction angle 𝛗 tip, pile length, pile area, and vertical effective stress were established as the network inputs, and the BHA, LCA, SCE, and SOS-based ANN models were set up to provide the pile bearing capacity as the output. Following a sensitivity analysis to determine the optimal BHA, LCA, SCE, and SOS parameters and a train and test procedure to determine the optimal network architecture or the number of hidden nodes, the best prediction approach was selected. The outcomes show a good agreement between the measured bearing capabilities and the pile bearing capacities forecasted by SCE-MLP. The testing dataset's respective mean square error and coefficient of determination, which are 0.91846 and 391.1539, indicate that using the SCE-MLP approach as a practical, efficient, and highly reliable technique to forecast the pile's bearing capacity is advantageous.

• 대한토목학회논문집
• /
• 제32권4C호
• /
• pp.159-167
• /
• 2012

본 연구는 실내 모형말뚝 재하실험과 유한요소해석을 통해 모형말뚝 선단부 주변 흙의 변형률 거동을 비교 분석하였다. 모형말뚝의 하중을 모사하기 위해 LCM(load control method) 기법과 DCM(displacement control method) 기법을 소개하고, 이 중 수치해석에 타당한 기법을 제안하였다. 유한요소해석에 있어서 말뚝의 미끄럼 거동을 모사하기 위해 기존과는 달리 두 가지 경계면 요소를 사용하여 모형실험 결과와 비교하였다. 본 연구를 통해 비연관 흐름의 정도(degree of non-associated flow)가 수치해석 값 수렴에 중요한 요소임을 알 수 있었다. 또한 수치해석에 있어 대칭인 최대전단변형률 분포를 얻기 위해서는 새로이 개선된 유한요소망(finite element mesh)의 도입이 필요함을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.87-93
• /
• 1994

Factors which affect the capacity and the soil plug condition of an open-ended pile can be broadly divided into three categories:i.e., pile conditions, soil conditions and penetration methods. It has been found that the relative density and the horizontal stress have much effects on the soil plug behavior than other soil conditions. Also, it has been found that the pile diameter is the most important factor among pile conditions. However, a few investigations have been performed to account for both soil conditions and pile conditions. In this paper, a number of calibration chamber tests have been conducted with three different sized open-ended model piles. The model pile was driven into siliceous sand, with varying soil conditions, to clarify coupled effects of pile diameter and soil conditions on the plug behavior, the capacity, and the load trasfer mechanixm of soil plug. The model piles are composed of two stainless steel pipes so as to measure the plug capacity, the tip resistance, and the outside skin friction. separately.

• 한국터널지하공간학회 논문집
• /
• 제19권3호
• /
• pp.355-373
• /
• 2017

도심지에서의 터널굴착은 상부구조물과의 상호거동에 대한 이해가 필수적이다. 도심지에 사용중인 대부분의 구조물은 말뚝기초로 상부의 하중을 지지하고 있어, 터널 굴착 시 반드시 영향을 받는다. 따라서 본 연구에서는 실내모형시험을 통해 기존의 군말뚝 기초 하부 터널굴착에 따른 축력 분포와 지반의 거동을 분석하였다. 말뚝 기초는 2, 3 열 말뚝으로 가정되었으며, 말뚝 선단부와 터널 천단부의 이격거리는 터널직경에 대한 일반화를 위해 터널 직경(D) 대비 0.5D, 1.0D 그리고 1.5D로 고려되었다. 지반은 약 30%의 상대밀도(Dr)를 가지는 느슨한 사질토로 형성되었으며, 말뚝의 축력 분포를 측정하기 위해 말뚝에 변형률게이지(strain gauge)를 부착하였다. 또한, 이격거리에 따른 군말뚝의 침하와 인접지반의 침하를 변위센서(linear variable differential transformer; LVDT)와 다이얼게이지(dial gauge)를 통해 측정였으며, 터널굴착에 따른 지중의 변형을 근거리사진계측기법(close range photogrammetric technique)을 통해 측정하였다. 수치 해석을 통해 실내모형시험 및 근거리사진계측 결과와 비교 분석하였다. 본 연구에서는 체적손실율(volume loss; $V_L$) 개념을 이용하여 터널굴착을 모사하였으며, 1.5%로 적용되었다. 연구결과, 이격거리가 멀어질수록 말뚝의 축력감소는 작게 나타났으며, 침하량은 모두 유사한 경향을 나타내었다. 특히, 말뚝 선단부와 터널 천단부의 이격거리가 0.5D에서 1.0D로 증가할 때 축력과 침하량의 가장 큰 감소율이 가장 큰 것으로 나타났다.

• 한국지반공학회지:지반
• /
• 제6권4호
• /
• pp.53-64
• /
• 1990

말뚝의 지지력을 예측키 위한 수많은 방안들이 제안되어 왔으나,말뚝 재하시험에 의하는 방법 외에는 신뢰도가 낮은 실정이다. 그럼에도 불구하고 말뚝 재하시험 수행에는 많은 비용과 시간이 소요되어 극히 제한된 경우에만 적용되고 있다. 본 연구에서는 새로운 말뚝재하시험, "간편한 말뚝 재하시험 (SPLT)방법"을 소개한다. SPLT에서는 분리할 수 있는 선단부와 축소된 선단부가 시험말 뚝에 설계되어, 주면마찰력이 말뚝 선단부의 침하를 야기시키는 반력으로 작용하게 된다. 이에 따라 하중재하장치 또는 하중의 제작,설치 및 제거 과정이 생략될 수 있다. 생략될 수 있다.

• 한국지반공학회논문집
• /
• 제21권2호
• /
• pp.85-91
• /
• 2005

본 논문에서는 실내모형실험 및 유한요소 프로그램인 CRISP을 이용하여 사질토 지반에 근입되어있는 선단지지 말뚝의 하중-침하(P-S) 관계를 규명하였다. 선단지지말뚝의 효과를 유한요소 해석에서 모사하기 위하여 몇 가지 형태의 인터페이스 요소들(slip elements)을 말뚝 주변 및 선단에 도입하였다. 비관련 소성흐름 법칙의 정도, 즉 지반강도 정수인 내부마찰각과 팽창각의 차이 정도를 고려한 Mo-Coulomb 지반 모델에 있어서, 인터페이스 요소들이 포함된 선단지지말뚝은 내부마찰각과 팽창각의 차이가 유한요소 해의 수렴에 매우 중요한 역할을 하는 것으로 나타났다. 한편, 이와는 대조적으로 말뚝 주변에 적용한 인터페이스 요소 대신 Roller로 모사된 선단지지말뚝의 유한요소 해는 비관련 소성흐름 법칙의 정도에 대해서 영향을 받지 않고 수렴되는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제19권1호
• /
• pp.79-91
• /
• 2019

Renewed interest in the long-term pile foundations has been driven by the increase in offshore wind turbine installation to generate renewable energy. A monopile subjected to repetitive loads experiences an evolution of displacements, pile rotation, and stress redistribution along the embedded portion of the pile. However, it is not fully understood how the embedded pile interacts with the surrounding soil elements based on different pile geometries. This study investigates the long-term soil response around offshore monopiles using finite element method. The semi-empirical numerical approach is adopted to account for the fundamental features of volumetric strain (terminal void ratio) and shear strain (shakedown and ratcheting), the strain accumulation rate, and stress obliquity. The model is tested with different strain boundary conditions and stress obliquity by relaxing four model parameters. The parametric study includes pile diameter, embedded length, and moment arm distance from the surface. Numerical results indicate that different pile geometries produce a distinct evolution of lateral displacement and stress. In particular, the repetitive lateral load increases the global lateral load resistance. Further analysis provides insight into the propagation of the shear localization from the pile tip to the ground surface.