• 한국재료학회지
• /
• 제11권6호
• /
• pp.498-501
• /
• 2001

0.9Pb($Mg_{1/3}Nb_{2/3}$)$O_3$-0.1Pb$TiO_3$계 완화형 강유전체에서 MnO$_2$ 첨가가 압전물성에 미치는 영향을 강유전성이 우세한 온도영역인 -40~3$0^{\circ}C$의 온도범위에 걸쳐 조사하였다. MnO$_2$ 첨가에 의한 효과를 유전특성, 압전특성, 전계유기 변형특성 등의 영역에서 고찰하였다 MnO$_2$ 첨가량이 증가할수록 유전성 및 압전성은 hard piezoelectric의 경향을 나타내었다. 이러한 실험적 고찰로부터 첨가된 Mn은 강유전 도메인 분역을 고정하는 역할을 하는 것으로 제안되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.188-191
• /
• 2000

The properties of piezoelectric and dielectric for 0.05Pb(Mn$\_$0.4/W$\_$0.2/Nb$\_$0.4/)O$_3$ - 0.95PbZr$\_$x/Ti$\_$1-x/O$_3$ compositions have been investigated. In the composition of 0.05Pb(Mn$\_$0.4/W$\_$0.2/Nb$\_$0.4/)O$_3$ - 0.95PbZr$\_$0.51/Ti$\_$0.49/O$_3$, the values of k$\_$p/ and $\varepsilon$$\_$33/$\^$T// $\varepsilon$$\_$0/ are maximized, but Q$\_$m/ was minimized (k$\_$p/=56.5[%], Q$\_$m/=1130, d$\_$33/=258[pC/N], $\varepsilon$$\_$33/$\^$T// $\varepsilon$$\_$0/=1170). The grain size was suppressed and the uniformity of grain was improved at the 1100[˚C]. Also, we can see the dielectric constants variations between the before poling and after poling. This effect results from the effect(increase element of dielectric constants) between dipole switching and electrostriction inducing stress and dipole direction to the poling orientation(decrease element of dielectric constants). At x=0.51, we can find MPB(morphotropic phase boundary).

• 한국소음진동공학회논문집
• /
• 제21권12호
• /
• pp.1120-1131
• /
• 2011

Researches using time reversal acoustics(TRA) for impact localization have been paid attention to recently. Dispersion characteristics of Lamb waves, which restrict the utility of classical nondestructive evaluation based on time-of-flight information, can be compensated through the application of TRA to Lamb waves on a plate. This study investigates the spatial focusing performance of time reversal Lamb waves on a plate using finite element analysis. In particular, the virtual sensor effect caused by multiple wave reflections at the boundaries of a plate is shown to enable the spatial focusing of Lamb waves though a very small number of surface-bonded piezoelectric(PZT) sensors are available. The time window size of forward response signals, are normalized with respect to the number of virtual active sensors. Then their effects on the spatial focusing performance of Lamb waves are investigated.

• Smart Structures and Systems
• /
• 제21권6호
• /
• pp.761-776
• /
• 2018

Guided wave testing is a reliable and safe method for pipeline inspection. In general, guided wave testing employs a circumferential array of piezoelectric transducers to clamp on the pipe circumference. The sensitivity of the operation depends on many factors, including transducer distribution across the circumferential array. This paper presents the sensitivity analysis of transducer array for the circumferential characteristics of guided waves in a pipe using finite element modelling and experimental studies. Various cases are investigated for the outputs of guided waves in the numerical simulations, including the number of transducers per array, transducer excitation variability and variations in transducer spacing. The effect of the dimensions of simulated notches in the pipe is also investigated for different arrangements of the transducer array. The results from the finite element numerical simulations are then compared with the related experimental results. Results show that the numerical outputs agree well with the experimental data, and the guided wave mode T(0,1) presents high sensitivity to the notch size in the circumferential direction, but low sensitivity to the notch size in the axial direction.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.154-157
• /
• 2000

Distributed piezoelectric sensor and actuator system has been designed for the active vibration control of shell structure. PVDF is used for the materials of sensor/actuator. To prevent the adverse effect of spillover, distributed modal sensor/actuator system is established. Although shell structure is three-dimensional structure, the PVDF sensor/actuator system can be treated as two-dimensional Finite element programs are developed to consider curved structures having PVDF modal sensor/actuator. The nine-node Mindlin shell element with five nodal degree of freedoms is used for finite element discretization. The electrode patterns and lamination angle of PVDF sensor/actuator are optimized to design the modal sensor/actuator system Genetic algorithm is used for optimization. Sensor is designed to minimize the observation spillover, and actuator is designed to minimize the system energy of the control modes under a given initial condition. Modal sensor/actuator for the first and second modes of singly curved cantilevered shell structure are designed using mentioned methods. Discrete LQG method is used as a control law. Experimental demonstrations of the active vibration control with designed sensor/actuator system have been performed successfully.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.215-219
• /
• 2001

The resonators made of piezoelectric crystals such as a quartz crystal are widely used. Their frequency-temperature characteristics are of primary importance for their applications to the frequency control devices. The characteristics estimation is useful for determining their design parameters. In the present paper, several types of resonators are numerically analyzed. The numerical solutions are made using 3-D Finite Element Modeling, and the results are compared with the theoretical values whenever they are available. To demonstrate the validity of the present numerical approach, the application is made to the analysis of the plates with some well-established cutting angles. For the resonator stable with temperature change, the cutting angle is important in which the temperature coefficient of the first order is chosen to be zero. The rotated Y-cut plates in thickness-shear mode are considered. The equivalent circuit representation is often used fur describing the characteristics at the electrical terminals which enables the circuit analysis including the effect of temperature change by using the circuit simulators. The equivalent circuit parameters are obtained by fitting the admittance-frequency curve from the finite element analysis.

• 한국전기전자재료학회논문지
• /
• 제27권11호
• /
• pp.753-759
• /
• 2014

This paper describes the development of a piezoelectric flextensional transducer, which aims to effectively degrade the TCE contained in aqueous solution. In order to adjust the 1st flextensional resonant frequency and output displacement of the flextensional transducer, the effect of the geometrical variations on performance was analyzed using the finite element analysis (FEM). The results indicated that the effect of external shell's thickness and curvature were most significant, and experimental fabrication and characterization of a transducer was performed to confirm the results. To prove the capacity to degrade the TCE contained in aqueous solution, 50 and 100 ppm of TCE were prepared in sealed chamber, and investigated the removal rate of TCE through the time and initial concentration.

• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1140-1148
• /
• 2006

이 논문에서는 압전션트를 이용한 지능패널의 투과 손실에 대해 연구하였다. 지능패널의 전기-기계 연성계수인 어드미턴스를 도입하여 션트 댐핑의 성능을 예측하였다. 유한요소를 사용하여 수치적인 어드미턴스를 계산하였고 실험결과와 비교하였다. 압전션트 시스템에서 소음 저감의 효과를 보여주기 위해 지능패널의 투과 손실을 연구하였다. 두 개의 모델을 사용하여 어드미턴스와 투과 손실과의 관계를 규명하였고 이 관계에서 어드미턴스를 지능패널의 설계 지수로 사용가능함을 발견하였다.

• 센서학회지
• /
• 제6권1호
• /
• pp.1-5
• /
• 1997

La가 첨가된 $PbTiO_{3}(PLT)$ 박편을 이용하여 압전효과에 대한 보상이 이루어진 고감도 초전형 적외선 센서를 제작하였다. 센서는 두 개의 $1{\times}2\;mm^{2}$의 cell을 인접하게 나란히 설치하고 적절히 전극을 배열한 이중소자 형태로 제작하였으며, 제작된 센서는 단일 소자형 센서에 비하여 잡음 특성이 향상되어 신호대 잡음비가 350에 이르렀다. 나아가 2400 V/W 이상의 전압감도, $4.6{\times}10^{-8}\;C/cm^{2}K$의 초전계수 및 $4.2{\times}10^{-11}\;Ccm/J$의 전압 성능지수와 8.7 msec의 작은 열시상수 특성들을 보였다. 제작된 초전형 적외선 센서는 적절한 매치를 통하여 인체의 이차원적 이동방향의 감지에 응용할 수 있음을 실험을 통하여 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.1-6
• /
• 2015

Generating output characteristics of a ${\pi}$-type piezoelectric harvester depending on size of the ceramic and the elastic body were studied. The ${\pi}$-type piezoelectric harvester consists of a rectangular piezoelectric ceramic and a ${\pi}$ shaped elastic body. If the tensions is applied at both ends of an elastic body legs, the piezoelectric effect occurs at the ceramics through the form change of the elastic body. The structure of this ${\pi}$-type harvester can be used in a various area than an existing type generator, because it prevent from direct pressure to the ceramic. Generating characteristics of the harvester were analyzed by using finite element method program. The piezoelectric harvester was fabricated on the basis of analyzed results and attached on a frequency controllable vibrator to measure the output characteristics. And generating characteristics were defined by comparing analysis results and experimental results. The highest output voltage was obtained when the ceramic length, thickness were 20 mm, 0.5 mm in the analysis result. And experiment was performed by analysis results at low frequency region, output voltage was generated about 6 V.