Browse > Article
http://dx.doi.org/10.4313/JKEM.2015.28.1.1

A Study on Output Characteristics of the π-type Piezoelectric Harvester  

Lee, Byeong-Ha (Department of Electric Engineering, Changwon National University)
Jeong, Seong-Su (Department of Electric Engineering, Changwon National University)
Cheon, Seong-Kyu (Department of Electric Engineering, Changwon National University)
Ha, Yong-Woo (Department of Electric Engineering, Changwon National University)
Park, Tae-Gone (Department of Electric Engineering, Changwon National University)
Publication Information
Journal of the Korean Institute of Electrical and Electronic Material Engineers / v.28, no.1, 2015 , pp. 1-6 More about this Journal
Abstract
Generating output characteristics of a ${\pi}$-type piezoelectric harvester depending on size of the ceramic and the elastic body were studied. The ${\pi}$-type piezoelectric harvester consists of a rectangular piezoelectric ceramic and a ${\pi}$ shaped elastic body. If the tensions is applied at both ends of an elastic body legs, the piezoelectric effect occurs at the ceramics through the form change of the elastic body. The structure of this ${\pi}$-type harvester can be used in a various area than an existing type generator, because it prevent from direct pressure to the ceramic. Generating characteristics of the harvester were analyzed by using finite element method program. The piezoelectric harvester was fabricated on the basis of analyzed results and attached on a frequency controllable vibrator to measure the output characteristics. And generating characteristics were defined by comparing analysis results and experimental results. The highest output voltage was obtained when the ceramic length, thickness were 20 mm, 0.5 mm in the analysis result. And experiment was performed by analysis results at low frequency region, output voltage was generated about 6 V.
Keywords
Piezoelectric harvester; Tension; ${\pi}$-type;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 S. Roundy, P. K. Wright, and J. Rabaey, J. Computer Communications, 26, 1131 (2003).   DOI
2 S. J. Choi, KIPE Magazine, 18, 31 (2013).
3 T. H. Ng and W. H. Liao, Journal of Intelligent Material Systems and Structures, 16, 785 (2005).   DOI
4 K. Uchino, J. Giniewicz, Micromechatronics (Marcel Dekker Inc., Japan, 2003).
5 C. H. Park, J. W. Kim, S. S. Jeong, M. H. Kim, T. G. Park, and H. H. Chong, Appl. Mec. Mat., 217, 110 (2011).
6 H. I. Jun, S. S. Jeong, H. H. Chong, T. G. Park, and M. H. Kim, J. KIEEME, 22, 360 (2009).
7 T. G. Park, B. J. Kim, M. H. Kim, and K. Uchino, Jpn. J. Appl. Phys., 41, 7139 (2002).   DOI
8 C. H. Park, J. W. Kim, S. S. Jeong, M. H. Kim, T. G. Park, and H. H. Chong, Applied Mechanics and Materials, 110-116, 217 (2012).
9 H. Allik and J. R. Hughes, Int. J. Numerical Methods of Eng., 13, 151 (1970).
10 D. Y. Cha, S. J. Lee, and S. P. Chang, J. KIEEME, 24, 416 (2011).
11 J. H. Lim and T. G. Park, J. Electroceramic, 10, 1007 (2012).