• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.29.2-29.2
• /
• 2011

B-site substitution with isovalent and donor impurities was compared in terms of the piezoelectric properties of Bi-based ABO3 perovskite ceramics. X-ray diffraction study revealed that both impurities bring about degradation in their ferroelectric properties as well as piezoelectric characteristics. However, there existed a difference between the isovalent and heterovalent impurities that influence a phase transformation of ferroelectric anisotropic-to-electrostrictive pseudocubic symmetry. Based upon analyses including the crystal, microstructure, dielectric, ferroelectric properties, we believed that A-site vacancies in the ABO3 ceramic significantly contribute to a ferroelectric-nonpolar phase transition, which give rise to lead to a giant strains. The present paper will discuss the origin of giant strains in Bi-based perovskite ceramics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.438-441
• /
• 2001

In this study,microstructure and piezoelectric characteristics of PNW-PMN-PZT ceramics manufactured using attrition milling method were investigated. Sintering temperature of the ceramics was varied from $1180^{\circ}C$ to $1240^{\circ}C$.With increasing sintering temperature, dielectric constant was increased. In the specimen sintered at $1120^{\circ}C$,electromechanical coupling factor(Kp) and density showed the maxinum values of 0.546 and $7.78(g/cm^{3})$, respectively. In the specimen sintered at $1160^{\circ}C$,mechanical quality factor(Qm) also showed the maxinum value of 1,943.

• 한국표면공학회지
• /
• 제36권5호
• /
• pp.413-417
• /
• 2003

The effect of 0-0.7 ㏖% addition of $Cr_2$$O_3$on the dielectric, pyroelectric, and piezoelectric properties were studied in the (Mg$0.7Pb_{1}$$3/Nb_{2}$3/)$O_3$-$0.3PbTiO_3$(0.7PMN-0.3PT) ceramics with composition near the morphotropic phase boundary. The dielectric constant and loss of the ceramics samples were measured as a function of temperature at various frequencies (0.1-100 KHz). The pyroelectric coefficient was measured by using the Byer-Roundy method as a function of temperature. Dielectric, pyroelectric, and piezoelectric constant achieved the maximum values of 0.4 ㏖% $Cr_2$$O_3$The transition temperature is continuously shifted to lower temperature with an increase of a small amount of $Cr_2$$O_3$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.280-283
• /
• 2002

In this study, the effects of $Nb_{2}O_{5}$ addition on microstructure and piezoelectric characteristics of PNW-PMN-PZT ceramics were investigated. As $Nb_{2}O_{5}$ addition amount is increased, grain size is gradully decreased. At 0.3wt%$Nb_{2}O_{5}$ addition composition ceramics, maximum density, tetragonality and piezoelectric characteristics were obtained.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1510-1512
• /
• 1997

Piezoelectric characteristics of lead zirconate(PZ)-lead titanate(PT)-lead manganese antimony(PMS) ceramics with the various changes of calcination temperature in PMS were prepared. The range of their sintering temperature was from $1100^{\circ}C$ to $1250^{\circ}C$. The electro-mechanical properties of PZ-PT-PMS ceramics such as piezoelectric constant, electro-mechanical coupling coefficient, and mechanical quality factor are measured as a function of the calcination temperature of PMS. As increasing the calcination temperature of PMS mechanical quality factor is increased.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.1030-1036
• /
• 1994

The ceramics in the system 0.5[Pb(Ni1/3Nb2/3)O3]-0.5[0.65PbTiO3-0.35PbZrO3] were prepared by conventional solid state reaction method, double calcined method (columbite precursor method) and flux method using NaCl-KCl. Amount of pyrochlore phase for the calcined powders, sintering charateristrics, dielectric and piezoelectric properties were then investigated. Sintering temperature was 1000~120$0^{\circ}C$ and in case of flux method, the amount of flux to oxide was 1 : 1 mole ratio. The dielectric and piezoelectric properties of ceramics prepared by double calcined method and flux method were found to be better than those by conventional method. It was also possible to lower sintering temperature and reduce the amount of pyrochlore phase either by double calcined method or flux method. But with increasing sintering temperature, the difference in characteristrics due to diffrent fabrication method gradually.

• 대한전기학회논문지
• /
• 제41권1호
• /
• pp.50-55
• /
• 1992

Piezoelectric Buzzer which has been generally used requires about 30kV/cm poling process and has the aging effects. In this study, 0.85 PZN - 0.10 BT - 0.05 PT system ceramics with additives of 0 - 2 wt% YS12TOS13T were fabricated and investigated on electromechanical coupling coefficient(kS1pT), electric field induced charge coefficient(dS131T), and sound level. As the results, in the 0.4 wt% YS12TOS13T added composition ceramics compared with the basic, kS1pT was increased from 0.355 to 0.39 and induced piezoelectric d constant increased from 204 to 220 x 10S0-12T (C/N) and sound level of electrostrictive Buzzer has the highest value of 71.5 dB under 8kV/cm bias electric field.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.881-884
• /
• 2000

Recently mobile communication fields need piezoelectric ceramic resonators and filters as possible as small. The length-extensional vibration mode of a rectangular piezoelectric cesamic plate has the advantage of the small size, but the mode has not been studied sufficiently because it was not used extensively until now. In this paper, PZT + x[wt%l $Cr_20_3$ ceramics with rhombohedra1 phase were fabricated. And temperature stability for the mode of the ceramic specimen was investigated. Contrary to our expectations, addition of the stabilizer, $Cr_20_3$ did not promote the temperature stability for the mode in the PZT ceramic specimen with rhombohedra1 phase.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권6호
• /
• pp.257-262
• /
• 2001

In this paper, a linear ultrasonic motor using piezoelectric ceramics was fabricated, and its operation characteristics were investigated. A linear ultrasonic motor using L$_1$-B$_4$model was composed of a stator and a rotor, and a stator was composed of piezoelectric ceramics and a elastic body. When applied frequency and voltage were 58.4kHz and 56V respectively, the feeding speed of the motor was 19.8 cm/s. A linear ultrasonic motor could be moved in left and right directions by the phase difference. Feeding speed and feeding force of a linear ultrasonic motor could be controlled by applied voltage. A linear ultrasonic motor had a droping torque-speed characteristic. The maximum efficiency of linear ultrasonic motor was 2.14%. Therefore, this linear ultrasonic motor can be expected to be used for a card-forwarding device, such as a card reader device and so on.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.413-416
• /
• 2000

In this study, the physical properties of the acoustic element and case with metal-piezoelectric ceramics were analyzed. The dielectric and piezoelectric properties of 0.5 wt% MnO$_2$ and NiO doped 0.1Pb(Mg$_{1}$3/Nb$_{2}$3/)O$_3$-0.45PbTiO$_3$-0.45PbZrO$_3$ceramics were investigated aiming at acoustic transducer applications. The vibration characteristics for the laminated circular plate was analyzed for the various thickness and diameter of the piezoceramic layer and metal layer. Also, the acoustic characteristics for the geometrical form of case have been investigated. The design and fabrication method worked in this paper can be utilized in development of actuator and acoustic device.