• 한국동물학회지
• /
• 제30권2호
• /
• pp.154-166
• /
• 1987

Recently, the researches on the enteroendocrine cells of vertebrates have made a remarkable advance by the immunocytochemical methods. This study was attempted to investigate the topographical distributions and the shapes of gastrin, glucagon, somatostatin and cholecystokinin-8 immuno-reactive cells in the gastrointestinal tract of the Korean hedgehog, Erinaceus koreanus. For light-microscopical examination of immunocytochemistry, the tissue specimens taken from the various portions(body and pyloric protion of stomach, duodenum, jejunum, ileum and rectum) were fixed in glutaraldehyde-picric acid-acetic acid (GPA) or 10% neutral buffered formalin solutions. For the demonstration of immunoreactive cells, the paraffin sections (6$\mu$m) were immunocytochemically identified by PAP procedure (Sternberger, 1979) with gastrin, glucagon, somatostatin and cholecystokinin-8 antisera. Gastrin-immunoreactive cells were mainly distributed in the pyloric portion of stomach and were a few in the duodenum and jejunum. The shapes of these cells were round or oval in the pyloric portion and pyramidal in the small intestine. Glucagon-immunoreactive cells were sparsely distributed in the only small intestine. The shapes of these cells were mainly pyramidal. Somatostatin-immunoreactive cells were a few in the pyloric portion and duodenum, and were sparsely distributed in the body of stomach and jejunum. The shapes of these cells were round or oval in the stomach and oval or pyramidal in the small intestine. Cholecystokinin-8-immunoreactive cells were sparsely distributed in the only small intestine. The shapes of these cells were mainly oval or pyramidal.

• 공업화학
• /
• 제7권1호
• /
• pp.186-193
• /
• 1996

몇 가지 키토산 비드들을 W/O 에멀젼법과 capillary extrusion법에 의해 제조하여, SEM 사진을 통해 표면 구조와 표면적의 차이를 관찰하였고, BET법으로 표면적을 측정하였으며, 피크린산 적정에 의해 유효 아민함량을 측정하여 상기 결과들과의 상관관계를 알아 보았다. W/O 에멀젼법에 의해 제조한 비드의 경우 capillary extrusion법에 의해 제조된 비드들보다 입자의 크기가 작았으며, 반대로 표면적, 유효 아민함량은 높게 나타났다. 또한 비드의 표면적, 유효 아민함량, 겉보기 밀도(apparent density) 및 기계적 강도(hardness)는 제조시 건조방법에 따라 매우 큰 편차를 나타내었다. Hardness 측정결과 solvent dehydration법에 의해 건조된 비드들이 동결건조법에 의해 건조된 비드들에 비해 높은 강도를 나타내었다. 또한 겉보기 밀도에 있어서도 solvent dehydration한 비드들이 동결건조한 비드들에 비해 높은 겉보기 밀도를 보였다. SEM 사진 분석결과 solvent dehydration법에 의한 비드들은 매우 작은 pore들이 비드의 표면에 무수히 존재한 반면 동결건조한 비드에서는 벌집모양의 pore들이 존재하고 있음을 알 수 있었다. 피크린산 적정결과 solvent dehydration한 비드의 경우 동결건조한 비드보다 약 10배의 높은 유효 아민함량을 나타내었으며 비드의 표면적이 클수록 유효 아민함랑은 높게 나타났다. 또한 fluorescamine을 반응시킨 후 형광현미경으로 관찰하여 비드의 표면과 내부의 pore 주위에 노출된 1차 아민의 존재를 정성적으로 확인할 수 있었다.

• 대한화장품학회지
• /
• 제20권1호
• /
• pp.37-51
• /
• 1994

Glutaraldehyde를 사용하여 화학적인 가교반응에 의해 empty cross-linked chitosan microcapsule을 제조하였다. 또한 chitosan bead는 sodium hydroxide 용액을 이용한 coaervation에 의해 제조하였다. 이들의 제조를 위해 수상/유화제/유기상으로 이루어진 w/o emulsion을 형성시킨 후 에멀젼의 안정성에 영향을 미치는 요소들에 대해 조사하였다. 보조계면활선제로 n-hexanol을 첨가한 결과 유화안정성이 상승적으로 증가하는 경향을 보였다. Chitosan microcapsule은 광택이 나는 형태로 내부가 투명한 반면 chitosan bead는 백탁으로 내부가 불투명하며 매우 porous한 구조를 하고 있었다. Chitosan bead의 유리 아미노기의 분석은 picric acid titration으로 수행하였으며, 아미노산 반응의 종결여부는 ninhydrin color test에 의해 판정하였다. 또한 fluoroscamine에 의한 형광분석으로 chitosan bead의 표면에 많은 반응성 아미노기가 존재하고 있음을 정성적으로 확인할 수 있었으며, 이를 생리활성 펩티드의 커플링 반응에 이용할 수 있었다. 모델 펩티드로서 콜라겐의 receptor 부분에 해당하는 생체내 growth factor로 알려진 Gly-His-Lys를 각 아미노산 유도체를 차례로 커플링하여 chitosan bead 위에서 합성할 수 있으며, 세포 성장인자와 같은 여러 가지 생리 활성 펩티드의 운반체로서 chitosan bead가 쉽게 이용될 수 있는 가능성을 보여 주었다.

• 대한치과의사협회지
• /
• 제15권8호
• /
• pp.611-615
• /
• 1977

The author observed histochemically the nature of the calcified tissue in the rabbit dental pulp, induced by pulpal injection of potassium permanganate. The pulp of rabbit mandibular incisors were exposed and enlarged by a dental hand reamer. The exposed pulps were injected with 0.05ml of 20mM solution of potassium permanganate dissolved in Ringer's solution in experimental tooth. Also the control tooth received a pulpal injection of 0.05ml of Ringer's solution. After pulpal injection, the tooth was plugged with a gutta-percha root canal point. The staining techniques were hematoxylin-eosin stain, van Gieson stain, PAS reaction, toluidine blue stain, alcian blue-hematoxylin stain and colloidal iron-picric acid stain. The results were as follows: 1. The pulp on experimental tooth showed osteodentin-like calcified tissue. Also, in some areas, false denticle-like substance were observed. 2. The central portion of the calcified matrix showed metachromasia in toluidine blue stain had strong staining capacity in alcian blue stain. 3. The peripheral portion of the calcified tissue revealed marked van Gieson positive reaction for collagen. But their staining ability in alcian blue was slight and metachromasia was not appeared.

• KSBB Journal
• /
• 제8권4호
• /
• pp.370-374
• /
• 1993

Crown ether류인 dibenzo-18-crown-건를 carn­e er로 이용하여 액체막을 통해서의 금속이온의 이동 량을 picric acid의 absorbance를 ultraviolet spec trometer로 측정하여 평가하였다. 그 결과 dibenzo 18-crown-6에 의한 금속이온의 이동은 2가 금속이 온이 l가 금속이온 보다도 더 컷다. 이것은 이 계에 서는 이들 금속이온의 크기보다도 이온의 전하와 수 화(hydration)의 영향을 받았다. 이것은 18-crown-6가 $Ca^{2+}$이온과 같은 2가 이온의 수송에 적합하다 는 것을 의미한다. 또한 dibenzo-18-cro뻐-6에 의 한 이온의 수송은 이온의 선택성을 갖지 않고 이온을 포착할 수 있는 능력을 갖는 것이 좋은 것으로 확인되였다.

• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.22-31
• /
• 1997

The grain boundary etching method as a method for assessing degradation of structural materials has received much attention because it is simple, inexpensive and easy to apply to real components. In this study, the effectiveness of the method is verified by successfully applying the technique to in-service components of aged fossil power plants such as main steam pipes, boiler headers an turbine rotors. A new degradation parameter, intersecting number ratio (N$_{1}$/N$_{0}$), is employed. The intersecting number ratio (N$_{1}$/N$_{0}$) is defined as the ratio of intersection number (N$_{1}$) obtained from 5-minute picric acid etched surface to the number (N$_{0}$) obtained from nital etched surface. Two kinds of test materials, 2.25Cr-1Mo steel and 1Cr-1Mo-0.25V steel, were artificially thermal-aged at 630.deg. C in different levels of degradation., (N$_{1}$/N$_{0}$) were measured. And, correlations between the measured values and LMP values calculated from aging temperature and aging time were sought. To check the validity of the correlations obtained in laboratory, similar data were measured from service components in four old Korean fossil power plants. These on-site measurement data were in good correlation with those obtained in the laboratory.oratory.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1911-1918
• /
• 2001

Recently the non-destructive test technique which uses the grain boundary etching characteristics owing to the variation of material structures has been proposed. However, during in-serviced GEM test there are a lot of variables such as the changes of temperature and concentration of etching solution, the roughness condition of surface polished etc.. The purpose of this paper is to investigate the influences of these test variables on GEM test results in order to establish a reliable and sensitive of GEM evaluation technique. The experiments are conducted in various solution temperatures, 10$\^{C}$, 15$\^{C}$, 20$\^{C}$, and 25$\^{C}$ and in 70% and 100% concentrations of that, and in various surface roughnesses polished by #800, #2000, and 0.3㎛ alumina powder. Through the test with variables, it is verified that the decrease of temperature and concentration of etching solution and the coarsened surface roughness by not using polishing cloth and powder induce some badly and/or greatly influences on GEM test results like grain boundary etching width(W$\_$GB) and intersecting point ratio(N$\_$i/N$\_$0/). Therefore, to get reliable and good GEM test results, it must be prepared the surface of specimen polished by polishing cloth and 0.3㎛ alumina powder and the saturated picric acid solution having 25$\^{C}$ and be maintained the constant temperature(25$\^{C}$) during GEM test.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권4호
• /
• pp.1831-1835
• /
• 2014

Background: To investigate the relationship between extracellular matrix parameters and texture of prostatic lesions evaluated by transrectal real-time tissue elastography (TRTE). Methods: 120 patients suspicious for prostate cancer underwent TRTE. Targeted biopsies were carried out after 12-core systematic biopsy. Epithelia were stained with hematoxylin-eosin, and Victoria blue and Ponceau S were used to stain elastic-collagen fibers, and picric acid-sirius red for visualization of collagen type I (Col1) and III (Col3). Smooth muscles were visualized by immunohistochemistry. All image analyses were performed in a blind manner using Image Pro Plus 6.0, and the area ratios of epithelium, elastic fibers, collagen fibers and Col1/Col3 were determined. Results: 42 patients with typical elastograms were included in the final data analysis. Significant differences were detected between the benign and malignant groups in the area ratios of epithelium (P = 0.01), smooth muscles and Col1/Col3 (P = 0.04, P = 0.02, respectively). There were no significant differences in the area ratios of epithelium, smooth muscle and elastic fibers between the stiff and soft lesion groups. The area ratio of Col1 was ($0.05{\pm}0.03$) in the stiff group, and ($0.02{\pm}0.01$) in the soft group (P= 0.00). However, the area ratio of Col3 was ($0.03{\pm}0.02$) in the stiff group, and ($0.05{\pm}0.04$) in the soft group (P = 0.16). Col1/Col3 in the stiff group ($1.99{\pm}1.59$) was greater than in the soft group ($0.71{\pm}0.64$) (P = 0.01). Conclusions: Tissue hardness of prostatic tumors was mainly dependent on the Col1 content, Col1/Col3 being higher in malignant than in benign lesions, so the prostate tissue texture can be used as a target for distinguishing between the two with TRTE.

• Bulletin of the Korean Chemical Society
• /
• 제26권8호
• /
• pp.1197-1202
• /
• 2005

The Ln(III) complexes with picrate ligand, $[Sm(Pic)_2(H_2O)_6]Pic{\cdot}6H_2O$, 1, and $[Ho(Pic)(H_2O)_7](Pic)_2{\cdot}3H_2O$, 2, have been synthesized and their crystal structures are analyzed by X-ray diffraction methods. Complex 1, crystallizes in the monoclinic $P2_1/n$ space group and complex 2 in the triclinic P-1 space group. In complex 1, two picrate ligands coordinate to the Sm(III) ion, one of them in the bidentate fashion. There are one picrate anion and six water molecules in the crystal lattice. The nine-coordinated Sm(III) ion forms a slightly distorted tricapped trigonal prism. In complex 2, only one picrate ligand coordinates to the metal ion as a monodentate. There are two picrate anions and three water molecules in the crystal lattice. The eight-coordinated Ho(III) ion forms a distorted bicapped trigonal prism. Based on the results of the TG-DTG and DSC thermal analysis, it was analyzed that the lanthanide picrate complexes 1 and 2 are thermally decomposed in three distinctive stages, the dehydration, the picrate decomposition, and the formation of the metal oxide.

• 한국가스학회지
• /
• 제2권1호
• /
• pp.74-82
• /
• 1998

공정플랜트 설비 고온요소의 재질열화 정도를 평가하기 위해서 사용되는 방법 중 입계 부식법은 시험절차가 간단하고 실제 플랜트에서의 적용이 용이하여 안전 및 수명진단시에 많이 이용되어 왔다. 본 논문에서는 오랜 기간 고온에서 사용된 화학플랜트 및 정유플랜트의 실기 요소에 입계부식법을 적용하여 재질의 고온에서의 장시간 노출에 의한 인성열화도를 평가한 결과를 제시하였다. 실제 요소의 열화도 측정변수로서는 입계부식법으로 측정한 격자절단비 ($N_i/N_o$)를 사용했으며, 이로부터 인성열화도를 예측하였다. 인성열화도는 소형펀치 시험법으로 측정된 $({\Delta}DBTT)_{sp}$값으로 표현하였다. 격자절단비는 표면을 나이탈 부식했을 때의 격자수에 대한 피크린산으로 5분 부식했을 때의 격자수의 비율로 정의된다. 또한, 실험실에서 열처리된 시편으로부터 측정된 격자절단비와 Larson Miller Parameter와의 상관관계를 사용하여, 장시간 가동한 공정플랜트 요소에서 측정된 격자절단비로 잔여수명을 평가할 때의 고려사항에 대해 논의하였다.