A robot system was developed to pick desired colony. This robot system consisted of an image acquisition process which acquires the image information of colony, an illumination device which irradiates the object once when it gets the image of it, a picking head, a replicating head, a bed for fixing well-plates, and a sterilization device of sterilizing pin stained with colony. Picking pins were washed in an ultrasonic wave washing for takes ten seconds. Picking pins were dipped for sterilizing in alcohol for ten seconds. The time for resterilizing picking pins in a heater was five seconds. This performance test resulted 100% success rate for both the colony picking and the colony replication process. Considering the procedure in which 8 pins were smeared by colony, picked on a well plate, and sterilized as one cycle, the system could carry out one cycle in 110 seconds. It took about 138 minutes to pick around 600 colonies.
Purpose: Pepper prices have risen continuously because of a decrease in cultivation area; therefore, mechanical harvesting systems for peppers should be developed to reduce cost, time, and labor during harvest. In this study, a screw type picking head for a self-propelled pepper harvester was developed, and the optimal working conditions were evaluated considering helix types, winding directions of helix, and rotational speeds of the helix. Methods: The screw type was selected for the picking head after analyzing previous studies, and the device consisted of helices and a feed chain mechanism for conveying pepper branches. A double helix and a triple helix were manufactured, and rotational speeds of 200, 300, and 400 rpm were tested. The device was controlled by a variable speed (VS) motor and an inverter. Both the forward and reverse directions were tested for the winding and rotating directions of the helix. An experiment crop (cultivar: Longgreenmat) was cultivated in a plastic greenhouse. The test results were analyzed using the SAS program with ANOVA to examine the relationship between each factor and the performance of the picking head. Results: The results of the double and triple helix tests in the reverse direction showed gross harvest efficiency levels of 60-95%, mechanical damage rates of 8-20%, and net marketable portion rates of 50-80%. The dividing ratio was highest at a rotational speed of 400 rpm. Gross harvest efficiency was influenced by the types of helix and rotational speed. Net marketable portion was influenced by rotational speed but not influenced by the type of helix. Mechanical damage was not influenced by the type of helix or rotational speed. Conclusions: Best gross harvest efficiency was obtained at a rotational speed of 400 rpm; however, operating the device at that speed resulted in vibration, which should be reduced.
Journal of the Korean Society of Manufacturing Technology Engineers
/
v.21
no.3
/
pp.401-407
/
2012
The recent manufacturing process in the thin wafers and flat panel necessitate new approaches to reduce handling fragile and surface-sensitive damage of components. This paper presents a new pneumatic levitation for non-contact handling of parts and substrates. This levitation can achieve non-contact handling by blowing air into an air pressure pick-up head with radial passages to generate a negative pressure region. Negative pressure is caused by the radial air flow by nozzle throat and through holes connecting to the bottom region. The numerical analysis deals with the levitational motion with different design factors. The dynamic motion is examined in terms of force balance(dynamic equilibrium) occurring to the flow field between two objects. The stable equilibrium position and the safe separation distance are determined by analyzing the local pressure distribution in the fluid motion. They make considerable design factors consisting the air pressure pick-up head. As a result, in case that the safe separation distance is beyond 0.7mm, the proposed pick-up head can levitate stably at the equilibrium position. Furthermore, it can provide little effect of torque, and obtain more wide picking region according to the head size.
Journal of Korean Society of Industrial and Systems Engineering
/
v.28
no.3
/
pp.109-114
/
2005
The founding purpose of Business Incubation System is to induce those businessmen who have technology and promising business ideas but are lacking fund, information, and management skill, and to speed up their business establishment and enhance the level of success by providing them with managerial knowledge, production technology, design, and equipment. While some universities made Business Incubation Center to achieve the above purpose, some other universities, especially the local ones, believed that Business Incubation Center, if managed successfully, could be an accelerator picking up the sluggish local economies. This study studied the motivators that let them move in an Incubating Center, their request for support, their level of expert utilization, and the role of head of a Center. This study found a significant level of correlation among the variables such as industrial-educational cooperation, the development of common items, utilization of professors with matching majors, utilization of research professors, and transfer of technology.
This study proposes a multi-level damage localization strategy to achieve an effective damage detection system for civil infrastructure systems based on wireless sensors. The proposed system is designed for use of distributed computation in a wireless sensor network (WSN). Modal identification is achieved using the frequency-domain decomposition (FDD) method and the peak-picking technique. The ASH (angle-between-string-and-horizon) and AS (axial strain) flexibility-based methods are employed for identifying and localizing damage. Fundamentally, the multi-level damage localization strategy does not activate all of the sensor nodes in the network at once. Instead, relatively few sensors are used to perform coarse-grained damage localization; if damage is detected, only those sensors in the potentially damaged regions are incrementally added to the network to perform finer-grained damage localization. In this way, many nodes are able to remain asleep for part or all of the multi-level interrogations, and thus the total energy cost is reduced considerably. In addition, a novel distributed computing strategy is also proposed to reduce the energy consumed in a sensor node, which distributes modal identification and damage detection tasks across a WSN and only allows small amount of useful intermediate results to be transmitted wirelessly. Computations are first performed on each leaf node independently, and the aggregated information is transmitted to one cluster head in each cluster. A second stage of computations are performed on each cluster head, and the identified operational deflection shapes and natural frequencies are transmitted to the base station of the WSN. The damage indicators are extracted at the base station. The proposed strategy yields a WSN-based SHM system which can effectively and automatically identify and localize damage, and is efficient in energy usage. The proposed strategy is validated using two illustrative numerical simulations and experimental validation is performed using a cantilevered beam.
The Journal of the Korean Society for Microbiology
/
v.11
no.1
/
pp.79-85
/
1976
There are many of anaerobic culture methods and equipments for isolation and cultivation of anaerabic bacteria, but most of these methods are used without pre-reduced media. Gas-jet method is a recommend. able method for the culture of anaerobes, resently developed. Bacteriological studies were experimented of liver abscess of cattle by the use of gas. jet method. The results were summarised as follows; 1. Gas-jet method for anaerobic culture are expedient for the making of pre-reduced media, maintaining of oxygen free condition in the culture tube, picking of bacteria from colony and colony counting etc. 2. A 121 strains of facultative anaerobic and anaerobic bacteria were isolated from liver abscess of 27 head of cattle, and the isolated anaerobic bacteria were as follows. Peptostreptococcus spp. 7 strains Acid aminococcus fermentans 1 Veillonella spp. 1 Bacterioides spp. 6 Bifidobacterium spp. 4 Arachinia propionica 2 Lactobacillus spp. 4 Propionibacterium acnes 1 3. Liver abscess were infected with many of bacteria, about $10^3-10^9$ numbers per gram of abcessed tissue. Almost of abscess were mixed infection of various bacterial species rather than simple species.
Journal of the korean academy of Pediatric Dentistry
/
v.30
no.3
/
pp.341-347
/
2003
Smith-Magenis syndrome (SMS) is a clinically recognizable multiple congenital anomaly and mental retardation syndrome caused by an interstitial deletion of chromosome 17 p11.2. Physical features include short stature, characteristic facial appearance: flattened mid-face, down-turned mouth, prominent and often rosy cheeks; prominent jaw in older children and adults, chronic ear infections, hearing impairment, eye problems, including: strabismus (an eye which turns in or out) and myopia (nearsightedness), hoarse voice, short fingers and toes, heart defects or murmurs, problems related to the urinary system, scoliosis (curvature of the spine), an unusual gait (walking pattern), and decreased sensitivity to pain. Behavioral and developmental characteristics include speech delay and articulation problems, developmental delay, learning disability, mental retardation, hyperactivity, self-injury, including: head banging; hand biting; picking at skin, sores and nails; pulling off finger- and toenails; inserting foreign objects into ears, nose, or other body orifices, explosive outbursts, prolonged tantrums, destructive and aggressive behavior, excitability, arm hugging or hand squeezing when excited. This report is the case of a Korean 3-year-3-month old male with Smith-Magenis syndrome referred from local clinic for the treatment of dental caries. The patient was treated by physical restraint after prophylatic administration of antibiotic(Amoxacillin 50mg/kg).
Four pigeons which lived together of same cage were referred due to excessive feather loss, severe itching, and erythema on the head, neck and flank regions. They had behavioral problem with feather bloating and plucking. Although they were mildly depressed, appetite was normal. On microscopic examination of feather picking, prominent external parasite infection was found. Mite infection was diagnosed with morphological confirmation. On analysis of complete blood count (CBC), eosinophilia was evident. The patients were treated with ivermectin (apply 200 mcg/kg topically two times per every other week and spray 200 mcg/ml solution every week). Clinical signs of four, pigeons were improved 45 days following first therapy. This case report indicates that mite infection is accompanied with severe feather loss, itching, and generalized erythema on the skin and behavioral problem with feather bloating and plucking. And this infection can be managed with topical and spray application of Ivermectin without injection.
The purpose of this study was to compare Gwonbeop motions among "Gihyosinseo", "Mubiji", "Muyejaebobunyuksokjib" and to analysis catalogue of books on Gwonbeop for comprehensive interpretation in "Muyedobotongji". the conclusion through literature review was as follows. First, There were total 16 references which were composed of 14 references of China and 2 references of Korea. In particular there was no reference of Japan for Gwonbeop. In detail, unrepresentative references of China were "Hanseo", "Gihyosinseo", "Mubiji" and unrepresentative reference of Korea was Muyejaebobunyuksokjib". Second, We compared motions of Gwonbeop between China and Korea. There were located 5 motions such as Gyungakguheese(False Prey Posture), Gigose(Flag Beating Posture), Ahnshichukshinse(Goose Wing Posture), Jumjoose(Picking Elbow Posture), Pogase(Throwing Shelf Postere). In other three references unmentioned "Mubiji" there were located 8 motions such as Jungranse(Spring Railing Posture), Gichukgakse(Ghost Kicking and Leg Striking Postere), Jidangse(Open Finger Attacking Posture), Soodoose(Beast Head Shield Posture) Shingwon(Heavenly Fist Posture), Il-jopyunse(Whipping Lunging Posture), Jakjiryongse(Dragon Prey Snatching Posture), Joyangsoose(Slanting Hero Hand Posture), In two references of Korea there were located 2 unique motions such as Nachaluichoolmun Gakabyunhase(Low Encountering Posture), Gumgyedongnipse(Single Leg Throwing Postere). Third, Most of all we found two kinds of unique motions such as Chukcheonse and Eungswaeik on "Muyejaebobunyuksokjib" and such as Nachaluichoolmun Gakabyunhase(Low Encountering Posture), Gumgyedongnipse (Single Leg Throwing Postere) on "Muyedobotongji". Based on chronological table although "Gihyosinseo" is the longest literature, there was begun changing techniques in details on literatures of Korea. Transformed into techniques of Gwonbeop on Korea could be supposed that those skills were reflected in society and culture of the Joseon Dynasty. To sum it up, Gwonbeop of "Muyedobotongji" was written by "Gihyosinseo", "Mubiji", "Muyejaebobunyuksokjib" but most motions of Gwonbeop were begun to change gradually except 5 motions of "Gihyosinseo". Especially, there were 8 unique motions which could not be found in references of China. Those unique motions of Korea literatures were living proof of attempting transfiguration from motions of China. The significance of this study was to be able to put stepping-stone to interpretate history of Taekwondo which takes center stage on bare hands martial arts and analyzed the meaning of historical martial arts on Gwonbeop in Joseon Dynasty.
이메일무단수집거부
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.