• Title/Summary/Keyword: Physico-chemical Properties

Search Result 970, Processing Time 0.026 seconds

Influence of Sterilization Methods on Atrazine Assimilation (멸균법이 atrazine의 분해과정에 미치는 영향)

  • 정규혁;오승민
    • Journal of Environmental Health Sciences
    • /
    • v.23 no.1
    • /
    • pp.1-7
    • /
    • 1997
  • We investigated the influence of various known sterilization methods on atrazine assimilation. The present study was designed to investigate the effect of autoclaving, sodium azide and mercuric chloride treatment on the assimilation of atrazine in soil and sediment. The sterilization reactor treated with sodium azide resulted in $^{14}CO_2$ generation and atrazine was rapidly disappeared from reactor through chemical reaction with sodium azide. These findings seem to indicate that sodium azide sterilization is not recommended for atrazine studies. In sample reactors autoclaved or treated with mercuric chloride, $^{14}CO_2$ generation was not detected and most of the disappeared atrazine was found to exist as hydroxyatrazine. These results suggested that autoclaving or mercuric chloride treatment could be effective sterilization methods. However, chemical properties(pH and redox potential) of soil and sediment were altered by any of the sterilization methods applied. So it was suspected that these altered properties could affect distribution and mineralization of atrazine in soil and sediment. In addition, both autoclaving and mercuric chloride treatment have altered $K_d$ values of hydroxyatrazine more significantly than those of atrazine. Consequently, although autoclaving and mercuric chloride treatment are effective sterilization methods, one must be careful in using them in practice as these methods may cause chemical degradation of both of atrazine and its metabolites and changes in chemical properties of soil and sediment. In conclusion, careful assessment of sterilization methods must be made for the degradation studies of chemicals in soil and sediment in order to minimize possible undesirable chemical degradation of sample and/or changes in physico-chemical properties of soil and sediment by the selected sterilization methods.

  • PDF

Effects of Artificial Culture Medium of Wild Ginseng on the Physico-chemical Characteristics of Pork (돈육의 이화학적 품질 특성에 미치는 산삼 배양액 급여 영향)

  • Jin, Sang-Keun;Kim, Il-Suk;Jung, Hyun-Jung;Kim, Dong-Hoon;Lee, Jae-Ryong
    • Food Science of Animal Resources
    • /
    • v.26 no.3
    • /
    • pp.337-342
    • /
    • 2006
  • A total of 120 pigs (Berkshire) were used to investigate the effect of dietary supplementation with artificial culture medium of wild ginseng (CWG) on the physico-chemical characteristics of pork About $60{\pm}3kg$ pigs were randomly assigned to 4 pens based on sex and diet (C: commercial diet feed or T: commercial diet+1 L CWG per day for 70 days). Pigs were slaughtered at approximately 110 kg live weight, and proximate composition and physico-chemical characteristics were measured in pork loin. The moisture content, hardness and chewiness of pork were higher in gilt fed CWG than in gilt fed the control diet, but the water-holding capacity of pork and $L^*$ values of fat color were lower. The shear force and $a^*$ values of pork were higher in barrow fed CWG than in harrow fed the control diet. The crude fat content, hardness, cohesiveness, chewiness of pork and $a^*\;and\;b^*$ values of fat color were lower in barrow than in gilt, but the pH was higher. These results imply that the proximate composition and physico-chemical characteristics of pork could be affected by dietary supplementation with CWG and the sex of the pig, while the texture properties and at values of pork may be improved with dietary CWG.

Analysis of Structure and Physical and Chemical Properties of the Carbonized Pine Wood (Pinus densiflora S. et Z) Powder (I) - Elemental Analysis, SEM, N2 Adsorption-desorption- (가열처리 및 탄화처리 소나무재(Pinus densiflora) 목분의 구조 및 물리·화학적 특성(I) - 원소 분석, SEM, 질소 흡착-탈착 실험 -)

  • Lee, In-Ja;Lee, Won-Hee
    • Journal of the Korean Wood Science and Technology
    • /
    • v.36 no.4
    • /
    • pp.44-51
    • /
    • 2008
  • In this study, the effects of carbonization temperature on the physico-chemical properties of Korean red-pine wood (Pinus densiflora S. et Z.) powder charcoal are studied by elemental analysis, nitrogen adsorption-desorption and SEM techniques. The surface structure and physico-chemical properties of the wood charcoal greatly depend on the carbonization temperature and their temperature dependences for sapwood (swd) and heartwood (hwd) are qualitatively analogous. Because of the differences in characteristics such as hardness and composition between heartwood and sapwood, charcoals from heartwood have larger specific surface area and smaller average pore diameter than that from sapwood. Because the decomposition reaction mostly proceeds in the precarbonization stage, the charcoal produced in this stage mainly consists of carbon. The second carbonization reaction is insignificant but still proceeds up to $700^{\circ}C$, and the specific surface area continuously increases. Above $800^{\circ}C$, the surface area is reduced by the pore-filling and narrowing effects and especially above $900^{\circ}C$, new carbon phase with hexagonal column rooted into the pore is formed. The nitrogen adsorption-desorption isotherm of the charcoal is classified as type I and its hysteresis loop was as type H4.

Comparison of Soil Physical and Chemical Properties between Coniferous and Deciduous forests in Mt. Palgong (침.활엽수림에서 산림토양의 이.화학적 특성 비교)

  • Hur, Tae-Chul;Joo, Sung-Hyun
    • Current Research on Agriculture and Life Sciences
    • /
    • v.20
    • /
    • pp.39-47
    • /
    • 2002
  • This study was carried out in order to produce useful material for the forest multiple use and forest protection by soil physico-chemical analysis of studied area in Mt. Palgong. The results of soil physico-chemical analysis and statistical analysis represented as following 2 points. 1. Soil depth was in the range of average 61.1 cm and soil texture was loamy sand and sandy loam except Donghwasa area. The part of solid phase and gaseous phase were higher than other areas, but liquid phase was less in verse. Soil water content was in an average 49.5%, penetrability was average $1.95{\times}E^{-2}cm/sec$ and the average of soil hardness was $1.64Kg/cm^2$. This data showed that soil water content, penetrability and soil hardness were good at Mt. Palgong forest soils. 2. Soil pH was the range of 3.4 to 6.0, organic carbon content was 2.8% that is nearly mean of the Korea brown forest soils, total N content is somewhat smaller than that of other places, and total average C/N ratios was 13.9. Average available $P_2O_5$ concentration was 5.05 mg/kg that is lower than that of any others. The concentration of available P of coniferous forests is higher than that of deciduous forests. Exchangeable cations content is similar to those of the Korea brown forest soil and the order of the cation content extent is $Ca^{2+}$ > $Mg^{2+}$ > $Na^+$ > $K^+$.

  • PDF

Analyses on Local-Seasonal Variations of Erosional Properties of Cohesive Sediments in Keum Estuary (금강 하구역 점착성 퇴적물 침식특성의 지엽적·계절적 변화 해석)

  • Yim, Shang Ho;Ryu, Hong-Ryul;Hwang, Kyu-Nam
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.1B
    • /
    • pp.125-135
    • /
    • 2008
  • The purpose of this study is to quantify the erosion parameters of cohesive sediments in Keum Estuary. This study also involves the examinations on the local/seasonal variation of them in Keum Estuary and on their spatial variation comparing with those of other sites. As erosional properties of cohesive sediments are in general influenced largely by the physico-chemical properties of cohesive sediments themselves, this study also involves the qualitative analyses on the impact by the physico-chemical properties. Erosion tests have been performed under the uniform bed condition using the Chonbuk annular flume and total 16 tests have been carried out with various bed densities and bottom shear stresses. Experimental results show that the critical shear stress for erosion varies in the range of $0.19{\sim}0.41N/m^2$ and the coefficient of erosion rate varies in the range of $54.26{\sim}7.70mg/cm^2{\cdot}hr$, over the corresponding bulk-density range of $1.14{\sim}1.38g/cm^3$. While erosion parameters estimated for Keum estuary sediments are found to be remarkably different in quantity compared with those for cohesive sediments from other sites, their local/seasonal variabilities within Keum Estuary are found to be insignificant.

A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties (포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구)

  • Kim, Ok Joon;Lee, Ha Young;Kim, Suh Woon;Kim, Soo Jin
    • Economic and Environmental Geology
    • /
    • v.4 no.4
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

THERMO-SENSITIVITY OF N-VINYL PYRROLODONE-CO-2- HYDROXYETHYLMETHACRYLATE HYDROGELS

  • Irina Nam;Park, Jung-Ki;Lee, Seong-Nam;Sung, Shi-Joon;Min, Yong-Jin
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2004.05a
    • /
    • pp.9-15
    • /
    • 2004
  • The copolymerization of HEMA with different hydrophilic and hydrophobic co-monomers allows for the manipulation of their intrinsic properties. 2-Hydroxyethylmethacrylate (HEMA)-based hydrogels thus are of great interest due to their outstanding physico-mechanical properties and chemical stability. The idea to use HEMA in order to create thermo-sensitive polymers was based on our assumption that thermal-sensitivity comes from a suitable hydrophilic-hydrophobic balance of macromolecules. In this work we have chosen N-vinyl pyrrolidone as a hydrophilic co-monomer with the relatively hydrophobic HEMA due to its good polymerizing properties as well as its non-toxicity in a polymer state and deserved recognition as a biocompatible material. As a result, copolymerization of NVP and HEMA was successful in obtaining new types of thermo-sensitive polymers composed of hydrophilic and hydrophobic monomers.

  • PDF

Extraction of Total Petroleum Hydracabons from Petroleum Oil-Contaminated Sandy Soil by Soil Washing (토양 세척법에 의한 유류오염 사질토양의 TPH 추출 효율 평가)

  • Lee, Cha-Dol;Yoo, Jong-Chan;Yang, Jung-Seok;Kong, Jun;Baek, Kitae
    • Journal of Soil and Groundwater Environment
    • /
    • v.18 no.7
    • /
    • pp.18-24
    • /
    • 2013
  • The influences of various operating parameters on physico-chemical techniques were evaluated to remediate petroleum-contaminated sandy soil including S/L ratio, kinetic, and effect of soil particle size. The simple extraction using tap water removed only 20.6% of total petroleum hydrocarbon (TPH), and addition of NaOH enhanced the removal of TPH to approximately 30%. To meet the regulation levels, a surfactant, sodium dodecyl sulfate, was added, and the removal of TPH increased to 4 times. Probably, the carbonate minerals affected chemical aging and soprtion of petroleum, which inhibited the extraction of TPH. The soil with smaller particle size contained more TPH, and the removal of TPH was obstructed with smaller particle size. However, NaOH addition increased the removal of TPH in the smaller particles. The physico-chemical properties of soil influenced greatly the removal of petroleum even in sandy soil.

Solid Dispersion of an HIV Protease Inhibitor

  • Park, Jae-Hyeon;Lee, Sung-Hack;Lee, Yong-Hee;Kim, Ae-Ri
    • Journal of Pharmaceutical Investigation
    • /
    • v.41 no.2
    • /
    • pp.75-82
    • /
    • 2011
  • LB71350 is an HIV protease inhibitor with poor aqueous solubility and extensive first pass effect. The purpose of the present study was to test the feasibility of solid dosage form of LB71350 with improved bioavailability utilizing solid dispersion. Three different compositions with varying ratio of (LB71350: Gelucire 44/14: Tween 20) were studied. Capsule filling of these solid dispersion compositions was tested using a semi-automatic capsule filling system. Oral bioavailability in dog was tested. Chemical and physical stability at 4, 25 and $40^{\circ}C$ was monitored by HPLC assay, dissolution test, powder XRD and microscopy. The capsule filling system yielded uniform products of drug loading up to 10%. Oral bioavailability in dog was improved compared to the aqueous suspension of crystalline LB71350. Capsules were chemically stable for up to 6 months at $40^{\circ}C$. However, there were temperature and composition dependent physical changes. Decrease in dissolution rates after storage at $40^{\circ}C$ was due to the polymorphic change. In conclusion, manufacturing process, bioavailability, and physico-chemical stability have been considered to propose a solid dispersion capsule formulation for the HIV protease inhibitor with poor physico-chemical properties. A new less soluble crystalline form identified during the physical stability test warrants further study.

The Physico-chemical and Sensory Properties of Milk with Water Soluble Chitosan (수용성 Chitosan을 첨가한 우유의 이화학적 및 관능적특성)

  • Lee, Jae-Won;Lee, Young-Chun
    • Korean Journal of Food Science and Technology
    • /
    • v.32 no.4
    • /
    • pp.806-813
    • /
    • 2000
  • Attempts were made to evaluate possibilities of adding water soluble chitosan to milk for improving functionality of milk, and physico-chemical and sensory properties of chitosan added milk were studied. pH and acidity of milk with ethyl alcohol washed chitosan were close to those of control. Color and consistency of chitosan added milk were better with chitosan of lower molecular weight than with high molecular weight. Chitosan of high molecular weight resulted in increased consistency and browning of milk. Milk with less than 1.0% chitosan could be sterilized at $73^{\circ}C$ for 15 sec. with minimum protein coagulation and increase of consistency. Low molecular weight chitosan$(MW\;0.2{\sim}3\;kDa)$ accelerated the growth of Bifidobacterium bifidum, showing 10 times more cell population after 32 hrs incubation. Sensory tests showed that adding chitosan to the regular city milk resulted in significant difference in color and chemical off-flavor(p<0.05). When chitosan was added to coffee milk, there was no significant difference in sensory quality from control. The storage test showed that pH, acidity, consistency and color of coffee milk with 0.5% chitosan did not change markedly during 30 days storage at 0 and $5^{\circ}C$, but changed rapidly after 16days storage at $10^{\circ}C$. Bacterial counts increased when storage temperature was high, and the growth of bacteria was delayed in coffee milk with chitosan.

  • PDF