• Nutrition Research and Practice
• /
• v.5 no.5
• /
• pp.396-403
• /
• 2011

Ceramides (Cer) comprise the major constituent of sphingolipids in the epidermis and are known to play diverse roles in the outermost layers of the skin including water retention and provision of a physical barrier. In addition, they can be hydrolyzed into free sphingoid bases such as $C_{18}$ sphingosine (SO) and $C_{18}$ sphinganine (SA) or can be further metabolized to $C_{18}$ So-1-phosphate (S1P) and $C_{18}$ Sa-1-phosphate (Sa1P) in keratinocytes. The significance of ceramide metabolites emerged from studies reporting altered levels of SO and SA in skin disorders and the role of S1P and Sa1P as signaling lipids. However, the overall metabolism of sphingoid bases and their phosphates during keratinocyte differentiation remains not fully understood. Therefore, in this study, we analyzed these Cer metabolites in the process of keratinocyte differentiation. Three distinct keratinocyte differentiation stages were prepared using 0.07 mM calcium (Ca$^{2+}$) (proliferation stage), 1.2 mM Ca$^{2+}$ (early differentiation stage) in serum-free medium, or serum-containing medium with vitamin C (50 ${\mu}L$/mL) (late differentiation stage). Serum-containing medium was also used to determine whether vitamin C increases the concentrations of sphingoid bases and their phosphates. The production of sphingoid bases and their phosphates after hydrolysis by alkaline phosphatase was determined using high-performance liquid chromatography. Compared to cells treated with 0.07 mM Ca$^{2+}$, levels of SO, SA, S1P, and SA1P were not altered after treatment with 1.2 mM Ca$^{2+}$. However, in keratinocytes cultured in serum-containing medium with vitamin C, levels of SO, SA, S1P, and SA1P were dramatically higher than those in 0.07- and l.2-mM Ca$^{2+}$-treated cells; however, compared to serum-containing medium alone, vitamin C did not significantly enhance their production. Taken together, we demonstrate that late differentiation induced by vitamin C and serum was accompanied by dramatic increases in the concentration of sphingoid bases and their phosphates, although vitamin C alone had no effect on their production.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.3
• /
• pp.49-56
• /
• 2023

The allowable mean overtopping discharge is used as a design parameter for coastal structures. The crest elevation of coastal structures should ensure the wave overtopping discharge within acceptable limits for structural safety and the safety of pedestrians, vehicles, operations, and so on. In this study, two-dimensional physical model tests on typical rubble-mound structure geometries were performed and the the mean wave overtopping discharges under various water depth and wave conditions were measrued. The various test conditions were applied to the tests with the change of the wave steepness, relative freeboard and relative wave height. An empirical formula from the experimental data was proposed to predict the mean wave overtopping volumes.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.394-399
• /
• 2015

In this study, the Cu catalyst decorated with activated carbon fibers were prepared for improving $SO_2$ adsorption properties. Flame retardant and heat treatments of Lyocell fibers were carried out to obtain carbon fibers with high yield. The prepared carbon fibers were activated by KOH solution for the high specific surface area and controlled pore size to improve $SO_2$ adsorption properties. Copper nitrate was also used to introduce the Cu catalyst on the activated carbon fibers (ACFs), which can induce various reactions in the process; i) copper nitrate promotes the decomposition reaction of oxygen group on the carbon fiber and ii) oxygen radical is generated by the decomposition of copper oxide and nitrates to promote the activation reaction of carbon fibers. As a result, the micro and meso pores were formed and Cu catalysts evenly distributed on ACFs. By Cu-impregnation process, both the specific surface area and micropore volume of carbon fibers increased over 10% compared to those of ACFs only. Also, this resulted in an increase in $SO_2$ adsorption capacity over 149% than that of using the raw ACF. The improvement in $SO_2$ adsorption properties may be originated from the synergy effect of two properties; (i) the physical adsorption from micro, meso and specific surface area due to the transition metal catalyst effect appeared during Cu-impregnation process and ii) the chemical adsorption of $SO_2$ gas promoted by the Cu catalyst on ACFs.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.352-360
• /
• 2017

Objectives: This study aimed to determine the effects on musculoskeletal symptoms of both social demographic features and detailed characteristics of each task category of care workers who offer visiting home-help services. And to establish the measures that can reduce musculoskeletal symptoms among care workers. Methods: This study was conducted among 192 care workers from welfare centers C and K located in city P. After participants completed the task burden checklist regarding the scale of musculoskeletal symptoms and the details of their duties, the data collected were analyzed using the SPSS 21.0 program. Results: According to the degree of observable musculoskeletal symptoms in care workers, the highest figures were observed for back and shoulder pain. Based on the results of assessing the effect of detailed task category characteristics on musculoskeletal symptoms, "helping patients eat, helping patients move, helping patients bath, and changing body positions" were found to have an effect from the physical care category, "providing physical therapy assistance, treating bedsores" from the health care category, and "cleaning and doing laundry" from the facility management category. Conclusions: Due to the high proportion of patients requiring burdensome physical labor from care workers such as moving patients who have trouble doing so on their own, helping them change positions, and so on, it is highly likely that pain will occur in the low back, which carries most of the physical weight. So, education on human epidemiological positions that can reduce overload on areas prone to pain such as the low back and shoulders is essential. Proper equipment and personnel support must be provided for dangerous tasks. Further, multidimensional social support is required consistently.

• Journal of the Korean Ceramic Society
• /
• v.44 no.10
• /
• pp.562-567
• /
• 2007

To precipitate the complex gels of the pH 6, 7, 8, 9 included in a flux and an aluminum hydroxides gel, an aqueous solution of a mixture of $Na_2CO_3\;and\;Na_2PO_4{\cdot}12H_2O$ was added with stirring in an aqueous solution of a mixture of $Al_2(SO_4){_3}{\cdot}18H_2O,\;Na_2SO_4\;and\;K_2SO_4$, and then the complex gels were aged in 20 h at $90^{\circ}C$. As the hydrolysis pH changed, it had an effect on the physical properties such as the crystal structure, crystal morphology and a phase transition temperature of the AlO(OH) gel, and also on the crystal structure, crystal morphology, particle size and particle size distribution of the ${\alpha}-Al_2O_3$ platelets prepared by molten-salt precipitation. Also, in this study, the complex gels were crystallized at $1,200^{\circ}C$ and thereafter dried at $110^{\circ}C$, and then it was investigated to effect of the hydrolysis pH on the crystal structure, morphology and particle size distribution of the ${\alpha}-Al_2O_3$ platelets crystals using XRD, DTA, SEM and particle size analyzer.

• Environmental Engineering Research
• /
• v.12 no.5
• /
• pp.218-223
• /
• 2007

The hybrid $C/TiO_2$ complexes were prepared by a method involving the penetration of titanium n-butoxide (TNB) solution with porous carbons. The photocatalysts were investigated for their surface textural properties and SEM morphology, structural crystallinity and elemental identification between porous carbon and $TiO_2$, and dye decomposition performance. For all the $C/TiO_2$ complexes prepared by TNB solution methods, the excellent photocatalytic effect for dye degradation should be attributed to the synergitic effects between photo-decomposition of the supported $TiO_2$ and adsorptivity of the porous carbons.

• Food Science of Animal Resources
• /
• v.29 no.6
• /
• pp.709-718
• /
• 2009

The purpose of this study was to search for physical treatments to reduce allergenicity of pork. Physical treatments such as heating, autoclave, microwave, sonication, and irradiation have been used for food processing or reduction of allergenicity. The porcine serum albumin (PSA), known as a major allergen in pork, was extracted after physical treatments. The antigenicity of pork extracts by heating (80 and $100^{\circ}C$ for 20 min), autoclave ($121^{\circ}C$ for 5, 10, and 30 min), and microwave (for 5 and 10 min) was significantly decreased. Especially, the binding ability of p-IgG to pork extracts by autoclave for 30 min showed the greatest decrease (about 3%) in physical treatments. However, the antigenicity of pork was unaffected by sonication and irradiation treatment. These results indicated that the autoclave treatment was the most effective method to reduce the antigenicity of pork.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.2
• /
• pp.153-159
• /
• 2004

This study was focused on evaluating physical properties and SO$_{x}$ removal capability of porous lime filters prepared by a foaming and a gelcasting method. Porosities of lime filters ranged from 55% to 85%, and their mean pore sizes were about 95 ${\mu}{\textrm}{m}$. It was observed that porous lime filters had the continuous pore structure that most pores were inter-connected by many windows. Before SO$_{x}$ removal reaction a surface of porous lime filters was made up of calcium oxide, but after reaction calcium sulfate became a main component. The SO$_{x}$ removal efficiency and the conversion ratio of calcium oxide to calcium sulfate increased according to reaction temperature and porosity. At 100$0^{\circ}C$, SO$_{x}$ removal efficiency of filters was always over 98% regardless of the porosity. In case of the filter with the porosity of 85%, the conversion ratios of calcium oxide increased according to the reaction temperature, and they were in the range 30% to 60%. to 60%.

• Korean Journal of Agricultural Science
• /
• v.38 no.4
• /
• pp.607-612
• /
• 2011

The occurrence of grape berry shattering and decay is influenced by the pre- and/or postharvest infection of decay organisms and pest. Postharvest infection is associated with physical damage due to rough handling. To control quality loss during storage of table grapes, the effects of slow releasing $SO^2$ pad on storability of 'Rosario Bianco' (Vitis vinifera) and 'Campbell Early' (Vitis labruscana) grapes were examined, respectively. The $SO^2$ concentration in package of tables grapes reached to at about 40 $ug{\cdot}L^{-1}$ after 40 days of treatment and remained more than 80 days above 15 $ug{\cdot}L^{-1}$. Decay was found in untreated 'Rosario Bianco' and 'Campbell Early' grapes at each for 44 and 85 days after storage, but not in $SO^2$ pad treated grapes. The storage potential of grape berries at $0^{\circ}C$ increased 2~3 times depending on cultivar by $SO^2$ pad treatment. The application of $SO^2$ pad is confirmed to be effective on the increase of market potential with minimizing quality loss such as berry shattering and decay.

• Journal of the Korean Ceramic Society
• /
• v.26 no.3
• /
• pp.361-370
• /
• 1989

Mullite powders were synthesized from the common solution of aluminum sulfate and sodium silicate solutions by the emulsion-hot kerosene technique. The reaction temperature and mechanism for mullitization and the characteristics of synthesized mullite powders were investigated. The effect of Na components introduced from sodium silicate solution on the physical property and microstructure of sintered mullite was also examined. It was proved that mullites were formed at 75$0^{\circ}C$ through the reaction mechanism of Na2O.2.2SiO2＋3.3Al2(SO4)3longrightarrow1.1(3Al2O3.2SiO2)＋Na2SO4＋8.9SO3. Synthetic mullite powders consisted of the compositiion of 3Al2O3.2SiO2 and showed highly agglomeration of hollow spherical particles of 1${\mu}{\textrm}{m}$ diameter. The density and fracture toughness of sintered mullites were somewhat reduced because of the effect of a very small amount of residual Na components.