• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.205-218
• /
• 1998

The purpose of this study is to develop and utilize new assessment of liquefaction potential based on DSC(disturbed state concept) and dissipated energy concept. The term liquefaction has suddenly loses its shear strength and behaves like a fluid. Liquefaction has been a source of a major damage during severe earthquake. In this study, the cyclic undrained behavior of Joomoonjin strand is investigated by using an automates triaxial testing device(C. K. Chan type). In order to assess liquefaction potential of saturated strand, DSC method and energy method are applied for the experimental data. The use of DSC method and energy method to define the liquefaction potential is verified through laboratory testis of cyclic triaxial test on saturated sand specimens. Based on the analytical results of DSC method, the relationship between the factor affecting liquefaction characteristics(Dr) and physical properties of the saturated santa(fs and D.) is found. Based on the analytical results of energy method, it is found that the initial liquefaction of rand is related to the significant change in the dissipated energy. Finally, it is shown that the DSC method and energy method can capture the liquefaction mechanism.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.109-115
• /
• 2005

Beidellite, a member of the smectite group, was synthesized hydrothermally from dickite. Physical and chemical properties of the synthetic Na-beidellite were characterized by the analytical methods of XRD, IR, TG, DTA, EDS, XRF and ICP. The result of Greene-Kelly test indicates that the synthesized smectite is Na-beidellite. IR spectrum of synthesized beidellite exhibited Al-O-H bending vibration at $818\;cm^{-1}\;and\;770\;cm^{-1}$ which was observed particularly in pure beidellite. TGA analysis revealed that the synthesized Na-beidellite comprises $16\;wt\%$ of water. DTA curve showed an endothermic peak at $117^{\circ}C$ due to dehydration reaction and peaks at $482^{\circ}C$ and $685^{\circ}C$ due to dehydroxylation reaction. The clay mineral was transformed to mullite and cristobalite at the temperature of $1028^{\circ}C$. The CEC value, Methylene Blue test and swelling capacity was determined to be $116\~118\;cmol/kg,\;84\~91\%,\;29\~32\;mL/2g$, respectively. The chemical composition of the synthesized phase was identified as $Na_{0.5}Al_{2.5}Si_{3.5}O_{10}(OH)_2$ from EDS and XRF analyses.

• The Journal of Engineering Geology
• /
• v.15 no.1
• /
• pp.67-76
• /
• 2005

This paper presents the application of a neural network for prediction of the unconfined compressive strength from physical properties and schmidt hardness number on rock samples. To investigate the suitability of this approach, the results of analysis using a neural network are compared to predictions obtained by statistical relations. The data sets containing 55 rock sample records which are composed of sandstone and shale were assembled in Daegu area. They were used to learn the neural network model with the back-propagation teaming algorithm. The rock characteristics as the teaming input of the neural network are: schmidt hardness number, specific gravity, absorption, porosity, p-wave velocity and S-wave velocity, while the corresponding unconfined compressive strength value functions as the teaming output of the neural network. A data set containing 45 test results was used to train the networks with the back-propagation teaming algorithm. Another data set of 10 test results was used to validate the generalization and prediction capabilities of the neural network.

• The Journal of Engineering Geology
• /
• v.5 no.2
• /
• pp.193-200
• /
• 1995

It has been well known that the alkali-aggregate reaction between the aggregates and cement paste is one of the reasons of a concrete siructre expansion. Because of a serious demage on the concrete stnicture from the expansion, in many countries, the safety of the materials is checked in laboratory by mortar-bar test and the upper limit of expansion in length is 0.1%. The prescriptions are presented in the ASTM C227 and 490 of U.S. which has been international currency and in the KS Handbook F2503, F2546 and L5107 of Korea published by Korean Standards Association. Both of the prescriptions are almost same in their contents. Actually, in the process of preparing and measuring the mortar-bar according to the prescription mentioned above, it seems that there are no problems for its own purpose but a few points are found to be improved upon the methods to increase the accuracy for laboratory work as follows. 1. The prescription of blending ratio(aggregate, cement and water) should be noted by volume not by weight. 2. It is unreasonable to measure the initial length of mortar bars after 24$\pm$2 hours at once regardless the kind of aggregates. 3. It may bring about errors in calculating the expansion ratio under the condition of the denominator value fixed as 254mm. 4. The measuring methods of specific gravity are selected according to the purposes but the pure specific gravity displays the highest accuracy among them.

• The Journal of Engineering Geology
• /
• v.30 no.2
• /
• pp.147-160
• /
• 2020

Unsaturated hydraulic conductivity of near-surface unconsolidated layers depends on the physical properties and water content of the unconsolidated layers. So far, many studies have been conducted on the unsaturated hydraulic conductivity of near-surface unconsolidated layers. However, researches on hydraulic conductivity of unsaturated fractured rocks have been relatively rare. In relation to the construction of a low/intermediate level radioactive waste surface-disposal facility, this study compared and analyzed van Genuchten parameters (α, n) in the laboratory and the hydraulic conductivity obtained in field tests for fractured hornfels at a radioactive-waste disposal site of Korea. The relationship between the field hydraulic conductivity and van Genuchten parameters using data from the ten depth intervals of three boreholes resulted in that the correlation coefficient (R) between the hydraulic conductivity and the van Genuchten parameter α was 0.7607, showing positive correlation whereas the R between the hydraulic conductivity and the van Genuchten shape-defining parameter n was -0.8720, showing negative correlation. Hence, this study confirmed the relationship between the field hydraulic conductivity and the van Genuchten unsaturated functions for the unsaturated fractured hornfels.

• Food Science and Preservation
• /
• v.21 no.1
• /
• pp.55-61
• /
• 2014

This study was to investigate the quality characteristics of brown rice mixed with white rice and boiled in hydrothermal extract of the medicinal herbs which was effective for diabetes in order to suggest a way of taking the rice everyday in Korean dietary life. The moisture content of the cooked rice was decreased with an increase of brown rice addition. The moisture content was same at Herbs extract ($H_2$). The physical properties of Herbs extract ($H_1$)and Herbs extract ($H_2$) showed a similar tendency. The hardness of the control, 100% of white rice, was lowest. The hardness was increased with increase of brown rice addition. The springiness, cohesiveness and gumminess tended to be decreased with increase of brown rice addition, while the chewiness was increased with increase of brown rice addition. In chromaticity, $H_1$ and $H_2$ revealed a similar trend. The color value L was decreased with increase of brown rice addition. The value a was decreased with increase of brown rice amount. On the contrary, the value b was increased with increase of brown rice amount. In the sensory test result of the cooked rice by using $H_1$, the appearance, taste, texture and the overall preference exhibited a tendency to decreased with increase of brown rice addition. The incase was similar to the rice cooked with $H_2$ and the overall preference showed a similar tendency, being highest at the sample added with 30% of brown rice.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.54.1-54.1
• /
• 2016

Multi-wavelength variability is a staple of active galactic nuclei (AGN). Optical variability probes the nature of the central engine of AGN at smaller linear scales than conventional imaging and spectroscopic techniques. Previous studies have shown that optical variability is more prevalent at longer timescales and at shorter wavelengths. Intra-night variability can be explained through the damped random walk model but small samples and inhomogeneous data have made constraining this model hard. To understand the properties and physical mechanism of intra-night optical variability, we are performing the KMTNet Active Nuclei Variability Survey (KANVaS). Using KMTNet, we aim to study the intra-night variability of ~1000 AGN at a magnitude depth of ~19mag in R band over a total area of ${\sim}24deg^2$ on the sky. Test data in the COSMOS, XMM-LSS, and S82-2 fields was obtained over 4, 6, and 8 nights respectively during 2015, in B, V, R, and I bands. Each night was composed of 5-13 epoch with ~30 min cadence and 80-120 sec exposure times. As a pilot study, we analyzed data in the COSMOS field where we reach a magnitude depth of ~19.5 in R band (at S/N~100) with seeing varying between 1.5-2.0 arcsec. We used the Chandra-COSMOS catalog to identify 166 AGNs among 549 AGNs at B<23. We performed differential photometry between the selected AGN and nearby stars, achieving photometric uncertainty ~0.01mag. We employ various standard time-series analysis tools to identify variable AGN, including the chi-square test. Preliminarily results indicate that intra-night variability is found for ~17%, 17%, 8% and 7% of all X-ray selected AGN in the B, V, R, and I band, respectively. The majority of the identified variable AGN are classified as Type 1 AGN, with only a handful of Type 2 AGN showing evidence for variability. The work done so far confirms there are more variable AGN at shorter wavelengths and that intra-night variability most likely originates in the accretion disk of these objects. We will briefly discuss the quality of the data, challenges we encountered, solutions we employed for this work, and our updated future plans.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.274-279
• /
• 2009

The flow of a universal system-level design methodology consists of system specification, system-level hardware/software partitioning, co-design, co-verification using virtual or physical prototype, and system integration. In this paper, verification environments based-on SystemVerilog and SystemC, one is native-code co-verification environment which makes prompt functional verification possible and another is SystemVerilog layered testbench which makes clock-level verification possible, are implemented. In native-code co-verification, HW and SW parts of SoC are respectively designed with SystemVerilog and SystemC after HW/SW partitioning using SystemC, then the functional interaction between HW and SW parts is carried out as one simulation process. SystemVerilog layered testbench is a verification environment including corner case test of DUT through the randomly generated test-vector. We adopt SystemC to design a component of verification environment which has multiple inheritance, and we combine SystemC design unit with the SystemVerilog layered testbench using SystemVerilog DPI and ModelSim macro. As multiple inheritance is useful for creating class types that combine the properties of two or more class types, the design of verification environment adopting SystemC in this paper can increase the code reusability.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.69-73
• /
• 2014

In this study, polysaccharide-poly(vinyl alcohol) (PVA) hydrogels were prepared by using ${\gamma}$-ray and evaluated for potential application as an anti-inflammation patch. Ulmus davidiana var. japonica (UD), one of polysaccharides has been particularly used as an oriental remedy for the treatment of inflammation and ulcers. PVA as a biocompatible polymer and glycerin as a moisturizer were blended with the UD, and its hydrogels were prepared by radiation crosslinking. Characterizations for UD hydrogels were performed by using cytotoxicity assay, antioxidant activity test, and physicochemical test such as gel fraction ratio, and swelling behavior. The results showed that these UD hydrogels had excellent physical properties, anti-inflammation activity, and non-cytotoxicity on the cells. Therefore, these polysaccharide based-UD hydrogels can be effectively used as an inflammation patch.

• Food Science and Preservation
• /
• v.18 no.6
• /
• pp.830-835
• /
• 2011

This study was conducted to evaluate the effects of the substitution of flour with young-barley-leaf powder on the quality characteristics of yellow layer cake. The physical properties of the cakes (i.e., viscosity, specific gravity, specific volume, cake index, and color) were measured, and the changes in hardness during the three-day storage at $22^{\circ}C$ were measured. Sensory evaluation was done with five-scale acceptance test. Both the viscosity and specific gravity of the batter were significantly influenced by the substitution. Nonetheless, no significant difference was shown in the specific volumes of the cakes. The volume indices of the cakes containing young-barley-leaf powder were higher than those of the control. The lightness, redness, and yellowness values of the crusts decreased with the addition of young-barley-leaf powder. While the lightness values of the crumbs decreased, the redness and yellowness values increased. The substitution of more than 6% flour with young-barley-leaf powder kept the hardness of the cakes lower than that of the control during the three-day storage. The cakes containing 2, 4, and 6% young-barely-leaf powder showed no significant differences from the control in the acceptance test, except in the crumb color.