• Journal of Korean Academy of Nursing
• /
• v.22 no.4
• /
• pp.506-525
• /
• 1992

Older people, because of the psychological and physiological changes related to the aging process are more vulnerable to experiencing powerlessness than any other age group. This self destructive cycle of depression in older people related to the experience of continued and long term powerlessness can lead even to death. The purpose of this study was to measure powerlessness and resources to increase power in older people, and to measure the effectiveness of a psychological rehabilitation program for reducing powerlessness. The research methodology used was a two step process. In the first step, a survey was done of perceived powerlessness and power resources comparing four groups of elderly people ; those living at home, those in hospital, those living in nursing homes and those attending educational programs for the elderly. The total sample size was 236. In the second step, a psychological rehabilitation program was carried out, pre and post measurements were taken related to this program. The sample consisted of 29 residents in a nursing home. The results of the study are as follows : 1. Powerlessness was classified as cognitive, emotional, activity and learning. The lowest score for powerlessness was in the area of activity, that is the people in the sample felt more power concerning their activities. The highest score was in the area of cognition where they felt they had less power. 2. When the different groups of elderly were compared, it was found that the residents of the nursing home had the highest score on perceived powerlessness and the group who were living at home had the lowest score. 3. Among the general characteristics, the factors influencing the powerlessness score were age, sex, level of education, financial resources and health status. In the interaction effects among these factors, it was found that level of education and health status were factors influencing perceived powerlessness. The elderly with lower education and poorer health status had the higher scores for perceived powerlessness. 4. The power resources could be classified into the following areas : physical strength, emotional strength, positive self-image, energy, knowledge, motivation and belief system. Belief system was given the highest score among the power resources and energy, knowledge and motivation were given low scores. 5. The group participating in an educational program for the elderly had the highest score for power resources while the group made up of residents of a nursing home had the lowest score as well as the highest score for perceived powerlessness. 6. The factors influencing the power resource scores were sex, level of education, financial resources and health status. In the analysis of the interaction effect among the factors, it was found that sex, level of education and financial resources were the factors that influenced the power resource score, that is, women, those with a low level of education and those with poor financial resources reported a lower level of power resources. 7. There was a negative correlation between perceived powerlessness and power resources in the elderly in this study. Since power resources explainded 49% of the variance for powerlessness, it can be concluded that the power resources can be used to reduce powerlessness. 8. The psychological rehabilitation program was carried out with the nursing home residents over a period of five weeks. No statistically significant difference was found in the scores on powerlessness between the pre and post tests, but there was a slight decrease in the raw scores on the post test for emotional, activity and learning powerlessness. There was a statistically significant increase in the power resource scores for emotional strength, positive self-image, energy, knowledge and motivation in the post test as compared to the pre test. In conclusion, the study indicates that a psychological rehabilitation program for the elderly could be effective in increasing power resources and this in turn could lead to a decrease in perceived powerlessness.

• Progress in Medical Physics
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2004

Patient dose verification is one of the most Important responsibilities of the physician in the treatment delivery of radiation therapy. For the task, it is necessary to use an accurate dosimeter that can verify the patient dose profile, and it is also necessary to determine the physical characteristics of beams used in intensity modulated radiation therapy (IMRT) The Beam Intensity Scanner (BInS) System is presented for the dosimetric verification of the two dimensional photon beam. The BInS has a scintillator, made of phosphor Terbium-doped Gadolinium Oxysulphide (Gd$_2$O$_2$S:Tb), to produce fluorescence from the irradiation of photon and electron beams. These fluoroscopic signals are collected and digitized by a digital video camera (DVC) and then processed by custom made software to express the relative dose profile in a 3 dimensional (3D) plot. As an application of the BInS, measurements related to IWRT are made and presented in this work. Using a static multileaf collimator (SMLC) technique, the intensity modulated beam (IMB) is delivered via a sequence of static portals made by controlled leaves. Thus, when static subfields are generated by a sequence of abutting portals, the penumbras and scattered photons of the delivered beams overlap in abutting field regions and this results in the creation of “hot spots”. Using the BInS, inter-step “hot spots” inherent in SMLC are measured and an empirical method to remove them is proposed. Another major MLC technique in IMRT, the dynamic multileaf collimator (DMLC) technique, has different characteristics from SMLC due to a different leaf operation mechanism during the irradiation of photon and electron beams. By using the BInS, the actual delivered doses by SMLC and DMLC techniques are measured and compared. Even if the planned dose to a target volume is equal in our experimental setting, the actual delivered dose by DMLC technique is measured to be larger by 14.8% than that by SMLC, and this is due to scattered photons and contaminant electrons at d$_{max}$.

• Korean journal of food and cookery science
• /
• v.19 no.6
• /
• pp.765-771
• /
• 2003

The aim of this study was to standardize the various methods and recipes of Hwajeun (glutinous rice pancake with flower) appeared in the literature. For this purpose, the effects on the sensory and rheological characteristics of Hwajeun in terms of the various levels of oil and frying times were investigated. This experiment consisted of a sensory evaluation in terms of the acceptance (color, flavor, oily feeling, softness, chewiness, adhesiveness, taste and overall preference) and objective evaluation performed by a texture analyzer, a color difference meter and measurements of the water content and oil absorption. The moisture content of the treatments as a function of the frying time, S7, showed a significantly(p＜0.01) low value, and the oil absorption of the Hwajeun made with different frying times increased in proportion to the increment of the frying time(p＜0.001). In terms of color, the b value of the Hwajeun made with 16g oil for frying showed a higher value than the others. In the two bite compression test, the hardness of the Hwajeun made with 4g oil for frying showed a significantly (p＜0.001) high value among the S2 and S3 samples. As a result of the sensory evaluation for the Hwajeun made with various amounts of oil and frying times, the Hwajeun made with 16g oil for frying and a 2 min frying time for each side (S6) was the most preferred in terms of the softness, chewiness, taste and overall preference of the sensory evaluation

• Progress in Medical Physics
• /
• v.18 no.2
• /
• pp.87-92
• /
• 2007

A thermal neutron beam facility utilizing a typical tangential beam port for Neutron Capture Therapy was installed at the HANARO, 30 MW multi-purpose research reactor. Mixed beams with different physical characteristics and relative biological effectiveness would be emitted from the BNCT irradiation facility, so a quantitative analysis of each component of the mixed beams should be performed to determine the accurate delivered dose. Thus, various techniques were applied including the use of activation foils, TLDs and ionization chambers. All the dose measurements were perform ed with the water phantom filled with distilled water. The results of the measurement were compared with MCNP4B calculation. The thermal neutron fluxes were $1.02E9n/cm^2{\cdot}s\;and\;6.07E8n/cm^2{\cdot}s$ at 10 and 20 mm depth respectively, and the fast neutron dose rate was insignificant as 0.11 Gy/hr at 10 mm depth in water The gamma-ray dose rate was 5.10 Gy/hr at 20 mm depth in water Good agreement within 5%, has been obtained between the measured dose and the calculated dose using MCNP for neutron and gamma component and discrepancy with 14% for fast neutron flux Considering the difficulty of neutron detection, the current study support the reliability of these results and confirmed the suitability of the thermal neutron beam as a dosimetric data for BNCT clinical trials.

• Radiation Oncology Journal
• /
• v.14 no.1
• /
• pp.77-85
• /
• 1996

Purpose : Multileaf collimator(MLC) is very suitable tool for conformal radio-therapy and commissioning measurements for a multileaf collimator installed on a dual energy accelerator with 6 and 10MV photons are required, For modeling the collimator with treament planning software, detailed dosimetric characterization of the multileaf collimator including the penumbra width, leaf transmission between leaf leakage and localization of the leaf ends and sides is an essential requirement. materials and Methods : Measurement of characteristic data of the MLC with 26 pair block leaves installed on CLINAC 2100C linear accelerator was performed. Low sensitive radiographic film(X-omatV) was used for the penumbra measurement and separate experiments using radiographic film and thermoluminescent dosimeters were performed to verify the dose distribution, Measured films were analized with a photodensitometer of WP700i scanner. Results : For 6 & 10 MV x-ray energies, approximately $2.0\%$ of photons incident on the multileaf collimator were transmitted and an additional $0.5\%$ leakage occurs between the leaves. Localizing the physical end of the leaves showed less than 1mm deviation from the $50\%$ decrement line and this difference is attributed to the curved shaped end on the leaves One side of a sin히e leaf corresponded to the $50\%$ decrement line, but the opposite face was aligned with a lower value. This difference is due to the tongue and groove used to decrease between leaf leakage. Alignment of the leaves to form a straight edge resulted larger penumbra at far position from isocenter as compare with divergent alloy blocks. When the MLC edge is stepped by sloping field, the isodose lines follow the leaf pattern and Produce scalloping isodose curves in tissue. The effective penumbra by 45 degree stepped MLC is about 10mm at 10cm depth for 6MV x-ray. The difference of effective penumbra in deep tissue between MLC and divergent alloy blocks is small (5mm). Conclusion : Using the characteristic data of MLC, the MLC has the clinlical acceptability and suitability for 3-D conformal radiotherapy except small field size.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.1-16
• /
• 2002

The need for ready-to-wear clothing increases as the problem comes to arise from the fit of custommade clothing due to the characteristics of middle-aged women's somatotype. At this point of time, a study on the realities of production of custom-made clothing in middle-aged women's clothing business firms is of very greatly significance. Therefore, this study was intended to identify the problem and improvements through the survey research of production of custom-made clothing in middle-aged women's clothing business firms and further present the plan for development of custom-made clothing business. The questionnaire was framed based on the contents extracted from the preliminary questionnaire research for the pattern section chief of each business firm. Collected data were statistically processed using the SPSS 10.0 Windows program. As a result, the following findings were obtained: 1. The target age of the middle-aged women's clothing business firms ranged from more than 45 years to less than 50 years of age. Clothing business firms much made inroads into the ready-to-wear clothing market largely in the 1980s and the 1990s. Their active entry into the custom-made clothing market occurred in the 1970s and the 1980s. 2. In terms of the clothing production method of middle-aged women's clothing firms, some private boutique and designer brand clothing firms entered the clothing market with a focus on custom-made clothing in the beginning of its organization and introduced the production method of ready-to-wear clothing in accordance with changes in production methods and consumers' needs and wants. National brand clothing firms manufactured clothing with a focus on ready-to-wear clothing from the beginning of its organization, but at last they manufactured both partial custom-made and whole custom-made as the problem arose from ready-to-wear clothing. Seeing that their clothing production showed the ratio readyto-wear to custom-made clothing of 2.58:1. And it was found that the manufacture of ready-to-wear and custom-made clothing took into consideration the great difference in the pattern, size and design plan. The research of the clothing production process showed that whole custom-made and partial custommade were distinguished according to whether or not the sample was presented. 3. The ready-to-wear pattern of middle-aged women's clothing firms were used with a focus on the 'patternmaker-developed pattern' and company-developed pattern'. Most clothing businesses produced clothing in 4 to 5 basic sizes, which is found to be insufficient to complement the physical characteristics of middle-aged women with many specific somatotypes. In the pattern of custom-made clothing, the 'pattern of ready-to-wear were applied' or the 'customized pattern was developed'. Actual measurements were most used as the size of custom-made, and accordingly it is predicted that the level of satisfaction is higher with the fit of custom-made clothing than that of ready-to-wear. The selling place and the head office showed the similar percent as the place for measuring the size of custom-made clothing. Size measurers were mostly the shop master. And it was found that most clothing business firms had a problem when the measured size was applied to the pattern. Accordingly, it is necessary to provide education on size measurement for shop masters. 4. It was found that in the middle-aged women's clothing firms, the pattern correction of the length of sleeve, jacket and slacks occupied the highest percent. Accordingly, it is necessary to provide for the size system to complement the accurate somatotype characteristics of middle-aged women. 5. In custom-made clothing customer management, most firms engaged in customer somatotype management through size management. They provided customers with commodity information by informing them of the sales and event period and practiced human management for customers by maintaining the get-together and friendly relationship. 6. Middle-aged women's clothing businesses responded that it would be necessary to improve the fit of custom-made clothing and complement their pursuit for individuality as the plan to improve its quality. In consequence, it suggests that middle-aged women's clothing businesses should provide middle-aged women with the clothing of better-suited size and refined design. Middle-aged women's clothing businesses responded that it was the most urgent task to form the custom-made clothing manufacturing team as the plan to expand the custom-made clothing market, which is identified as their emphasis on the systematized production of custom-made clothing.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.6
• /
• pp.836-845
• /
• 1999

Background : Obesity is present in the majority of adult patients with obstructive sleep apnea(OSA) and is considered to be a major risk factor for its development. A reduction in body weight has been associated with substantial improvement in the severity of apnea. However, a variety of treatment strategies for obesity have yielded limited sucess. This study was done to determine resting energy expenditure(REE) in patients with obstructive sleep apnea and the correlation between the severity of sleep apnea and REE, and to investigate whether leptin influences REE and correlated with the severity of sleep apnea in 39 patients with OSA and 45 controls matched for obesity. Method : Overnight polysomnography was performed on all subjects using standard techniques. Measurements of REE were made using a Sensormedic Vmax 229 and a canopy system. Serum leptin concentration was measured by human leptin RIA kit of LINCO Research INC. Results : REE was greater in patients with OSA compared with controls, but there was no difference between the two groups on REE%. And also there was no significant correlation between anthropometric data, polysomnographic data and REE%. Serum leptin was linearly related to body mass index(BMI), apnea index, apnea hypopnea index and lowest arterial oxygen saturation($SaO_2$) but not related to REE%. Conclusion : This study suggests the followings. Firstly patients patients with sleep apnea have a pattern of obesity characterized by energy homeostasis at an elevated body weight set-point. In order to achieve a lower body weight in these patients, it may be necessary to increase energy expenditure by increasing physical activity. Secondly leptin level was not correlated with REE, suggesting that leptin may predominantly regulate body fat by altering eating behavior rather than calorigenesis. Lastly leptin level was significantly correlated with the severity of sleep apnea. These elevated level of leptin in patients of sleep apnea may be related to the obesity, however it needs further studies to determine the relationship between the severity of sleep apnea and serum leptin.

• Korean Journal of Optics and Photonics
• /
• v.18 no.6
• /
• pp.452-460
• /
• 2007

Ultra-low loss ZERODUR and fused silica mirrors were manufactured and their light scattering characteristics were investigated. For this purpose, ZERODUR and fused silica substrates were super-polished by the bowl feed method. The surface roughness were 0.292 ${\AA}$ and 0.326 ${\AA}$ in rms for ZERODUR and fused silica, respectively. To obtain the high reflectivity, 22 thin film layers of $SiO_2$ and $Ta_2O_5$ were deposited by Ion Beam Sputtering. The measured light scattering of ZERODUR and fused silica mirror were 30.9 ppm and 4.6 ppm, respectively. This shows that the substrate surface roughness is not the only parameter which determines the light scattering of the mirror. In order to investigate the mechanism for additional light scattering of the ZERODUR mirror, the surface roughness of the mirror was measured by AFM and was found to be 2.3 times higher than that of the fused silica mirror. It is believed that there is some mismatch at the interface between the substrate and the first thin film layer which leads to the increased mirror surface roughness. To clarify this, the contact angle measurements were performed by SEO 300A, based on the Giriflaco-Good-Fowkes-Young method. The fused silica substrates with 0.46 ${\AA}$ in its physical surface roughness shows lower contact angle than that of the ZERODUR substrate with 0.31 ${\AA}$. This indicates that the thin film surface roughness is determined by not only its surface roughness but also the surface energy of the substrate, which depends on the chemical composition or crystalline orientation of the materials. The surface energy of each substrate was calculated from a contact angle measurement, and it shows that the higher the surface energy of the substrate, the better the surface roughness of the thin film.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.1
• /
• pp.88-95
• /
• 2007

The purpose of this study was to investigate the effects of a 12 week weight control program, which included nutrition education and regular physical fitness, on body weight, degree of obesity, BMI, and lowering of blood lipids in 16 obese male elementary school students. Changes in waist and hip circumferences and their ratios were measured at the conclusion of the 12 week program conducted from September 9 to November 25, 2005. Body weight after 12 weeks on the program slightly reduced from 55.4${\pm}$10.9 kg to 54.4${\pm}$9.7 kg. Degree of obesity and BMI decreased from 121.3${\pm}$8.1%, and 25.9${\pm}$3.3 to 120.0${\pm}$8.2% and, 25.6${\pm}$2.7, respectively. Body fat percentage decreased slightly from 38.3${\pm}$4.7% to 37.9${\pm}$5.2%. Waist to hip ratio did not change after 12 weeks. There were slight changes in weight of body fat and lean body mass from 22.12${\pm}$6.53 kg and 34.56${\pm}$4.75 kg to 21.68${\pm}$6.05 kg and 34.70${\pm}$4.54 kg, respectively. Also, after 12 weeks on the weight control program, body, waist, and hip circumferences decreased. However, there were no significant differences among the blood lipid components, including triglycerides, total cholesterol, and HDL-cholesterol. Finally, body weight, degree of obesity, BMI, and body fat showed more significant correlations to waist, hip circumference and their ratio than to blood lipid levels.

• Journal of the Korean earth science society
• /
• v.38 no.1
• /
• pp.64-79
• /
• 2017

We have reported the petrographic properties on the soda straw primarily based on the field measurements and discussed the causes of their traits. 156 soda straws in district B of the Baeg-nyong Cave nominated with the natural monument No. 260 have been investigated to estimate physical, sedimentological and textural characteristics. The soda straws have an average length of 3.05 cm with a standard deviation of 1.7 cm and a mean diameter of 6.0 mm. This result shows that the average diameter of the soda straws measured in this study is thicker than previous reports by 20%. Although the drip rates of cave water from 85.3% of all the soda straws are exceedingly lower than 1 drop per 10 minutes, almost all soda straws have a dripping water. We firstly report growth lamina in the Korean soda straw from 85.3% of all samples, and this textural dominance indicates that the growth lamina are one of the common features of the soda straws at least in the study area. Secondary precipitations inside the soda straw were identified from 68.6%. Notably, the strong inverse correlation between growth lamina and secondary precipitates was represented from 70.5% of all samples. This finding might be explained by the seasonality of cave drip water supplied into the soda straws or the increased opacity caused by secondary precipitates. Based on petrograhic characteristics, the soda straws in the study area can be classified into normal and erratic types. Hopefully our results on the soda straws in Baeg-nyong Cave would provide a basis for the descriptions of soda straws from other caves and paleoclimatic applications.