• 청정기술
• /
• 제19권2호
• /
• pp.184-188
• /
• 2013

기존 탄화수소계 세정제는 낮은 인화점으로 인하여 화재, 폭발과 같은 문제점을 가지고 있다. 인화점을 높이기 위해 불소가 포함된 난연성 세정제 7종을 개발하였다. 새롭게 합성한 세정제를 한국석유관리원에서 국가산업표준 방법으로 분석하여 물성을 측정하고 세정성 평가를 수행하였다. 물성 측정 결과, 인화점이 탄화수소계 세정제보다 높은 것을 확인하였다. 세정력 평가를 위하여 가로 60 mm, 세로 40 mm 크기의 스테인리스강 기판에 인발유, 아비에트산, 절삭유, 윤활유를 각각 도포하여 합성한 세정제(1~7)에 넣어 침적한 후 세정력을 평가하였다. 최대 5분간 침적하였을 때 인발유는 80~96%, 아비에트산은 82~97%, 윤활유는 86~93% 정도의 높은 세정력을 보였다. 그러나 절삭유에서는 60~87% 정도로 다른 오일보다 낮은 세정력을 보였다. 따라서 약간의 차이는 있지만 대체적으로 우수한 세정력을 보여 산업세정분야에 적용이 가능함을 나타내었다.

• 펄프종이기술
• /
• 제42권4호
• /
• pp.25-32
• /
• 2010

The beeswax-treated volumes of the Annals of Joseon Dynasty, designated as a UNESCO's Memories of the World, have been more seriously damaged than the untreated ones. As a continuous effort to develop the optimal conservation techniques for the damaged beeswax-treated volumes of the Annals, this study examines the effectiveness of wet cleaning on the conservation of the beeswax-treated paper. To do this, wet cleaning is performed on the duplicated beeswax-treated paper and the Hanji that are aged at $105^{\circ}C$ for 30 days using distilled water of $24^{\circ}C$ and $50^{\circ}C$. As results, it is observed that pH of the both the beeswax-treated paper and the Hanji increase, indicating the removal of the acid of the aged paper samples through wet cleaning. After the wet cleaning, however, the physical properties and viscosity of the Hanji decrease, while those of the beeswax-treated paper increase. It is also found that wet cleaning contributes to enhancement of most optical properties of the Hanji, but not for those of the beeswax-treated paper except for the $b^*$ value. Analyses of UV absorbance of cleaning water demonstrate that both the beeswax-treated paper and the Hanji have typical spectra of chromophore compounds of cellulose.

• 상하수도학회지
• /
• 제25권3호
• /
• pp.399-405
• /
• 2011

In a desalination technology using RO membranes, chemical cleaning makes damage for membrane surface and membrane life be shortened. In this research cleaning technology using direct osmosis (DO) was introduced to apply it under the condition of high pH and high concentration of feed. When the high concentration of feed is injected to the concentrate side after release of operating pressure, then backward flow occurred from treated water toward concentrated for osmotic pressure. This flow reduces fouling on the membrane surface. Namely, flux of DO was monitored under pH 3, 5, 10 and 12 conditions at feed concentrations of NaCl 40,000 mg/L, 120,000 mg/L and 160,000 mg/L. As a result, DO flux in pH 12 increased about 21% than pH 3. DO cleaning was performed under the concentrate NaCl 160,000 mg/L of pH 12 during 20 minutes. Three kinds of synthetic feed water were used as concentrates. They consisted of organic, inorganic and seawater; chemicals of SiO2 (200 mg/L), humic acid (50 mg/L) sodium alginate (50 mg/L) and seawater. As a result, fluxes were recovered to 17% in organic fouling, 15% in inorganic fouling and 14% of seawater fouling after cleaning using DO under the condition of concentrate NaCl 160,000 mg/L of pH 12.

• 한국응용과학기술학회지
• /
• 제20권4호
• /
• pp.283-288
• /
• 2003

Alkaline powder cleaning agents (APCAs) were prepared by blending of $Na_2CO_3$ tetrasodium pyrophosphate (TSPP). sodium orthosilicate (Na-OSi), Na-dioctyl sulfosuccinate (303C), Demol C, and MJU-100A (100A). The physical properties of APCAs tested with steel specimen showed the following results. The cleaning powers of APCA-6 ($Na_2CO_3$ 250g/TSPP 70g/Na-OSi 40g/303C 60g/Demol C 50g/100A 30g mixture) for press-rust preventing oil was 97% and 98% degreasing at 2wt%, $70^{\circ}C$ and $90^{\circ}C$, respectively; for Quenching oil, the cleaning power of APCA-6 was 95% degreasing at 2wt% and $70^{\circ}C$. From the results, it was ascertained that APCA-6 exhibited a good cleaning power. Also low foaming power tests proved that the APCA-6 maintained good defoaming effect.

• 한국환경보건학회지
• /
• 제32권5호
• /
• pp.478-484
• /
• 2006

There was no significant difference in the CADR (Clean Air Delivery Rate) between physical aerosols, NaCl and smoke, and biological aerosols, airborne MS2 virus and P. fluorescens, which implicate that the hybrid-type of air purifier, applying the unipolar ion emission and the radiant catalytic ionization, imposed identical reduction effect on both physical aerosol and bioaerosol. Ventilation decreases the efficiency of air cleaning by unipolar ionization because high ventilation diminishes the particle concentration reduction effect. The particle removal efficiency decreases with increase in the chamber volume because of the augmented ion diffusion and higher ion wall loss rate. Particle size affects the efficiency of air ionization. The efficiency is high for particles with very small diameter because reduction of charge increases with particle size. If there is no increasing supply of ions, the efficiency of air cleaning by unipolar ionization increases with respect to initial concentration of particles because of the large space charge effect at high particle concentration and amplified electric field.

• 청정기술
• /
• 제14권3호
• /
• pp.184-192
• /
• 2008

불소계 화합물인 삼불화에탄올(2,2,2-trifluoroethanol, TFEA)와 수소화불화에테르(hydrofluoroether, HFE)는 성층권의 오존층을 파괴하지 않으며, 수소화불화탄소(hydrofluorocarbon, HFC) 및 수소화염화불화 탄소(hydrochlorofluorocarbon, HCFC)계 세정제에 비하여 지구온난화 영향력도 낮다. 특히, 인화점이 없는 HFE계 세정제는 낮은 인화점을 갖는 탄화수소계 세정제보다 취급에 안전하고 침투력이 우수하여 차세대 염화불화탄소(chlorofluorocarbon, CFC) 대체세정제로 주목받고 있다. 본 연구에서는 불소계 세정제인 TFEL HFE-7100, HFE-7200, HFE-476mec, HFE-449mec-f, AE-3000, AE-3100E와 실리콘계 세정제인 트리플 루로에톡시트리메틸실란(trifluoroetoxytrimethylsilane, TFES)와 헥사메틸디실라잔 (hexamethyldisilazane, HMDS)의 물성과 세정력을 오존파괴 물질인 CFC-113, 삼염화에탄(1,1,1-trichloroethane)와 유해물질인 이염화탄소(methylene chloride, MC) 등의 염소계 세정제, 그리고 현재 대체세정제로 많이 사용하고 있는 이소프로필알코올(isopropyl alcohol, IPA) 등과 비교 평가하였다. 그 결과 TFEA와 HFEs는 일반적으로 발생하는 다양한 오염물질들에 대하여 염소계 세정제에 비하여 낮은 세정능력을 보여주었지만, 불소를 함유한 불소계 오염물의 제거에는 우수한 세정력을 보였다. 그리고 실리콘계 세정제인 TFES와 HMDS도 실리콘계 오염물에 대한 세정력이 우수함을 보여주었다.

• 청정기술
• /
• 제13권2호
• /
• pp.143-150
• /
• 2007

본 연구에서는 플러스, 솔더, 그리스와 같은 오염물질을 효과적으로 세정하기 위하여 글리콜 에테르계, 파라핀계 및 실록산계 물질을 배합한 탄화수소계 세정제를 제조하고 습윤지수, 아닐린점 그리고 용해도 매개변수 등의 세정성능에 대한 영향을 조사하였다. 탄화수소계 세정제의 배합은 단일물질의 물성에 기초하여 제조되었다. 제조된 세정제의 습윤지수와 아닐린 점은 실험을 통하여 측정하였으며 용해도 매개변수는 Hansen의 추정식을 사용하여 계산하였다. 본 연구에서는 플럭스, 솔더, 그리스의 오염물을 사용하여 세정제의 세정성능 평가를 진행하였다. 실험결과 배합 세정제의 세정성능이 플럭스, 솔더, 그리스의 오염물 세정에 매우 우수하게 나타났으며 오염물에 따라 세정효율에 영향을 미치는 변수가 다르게 나타났다. 플럭스 세정에서는 플럭스($21.3MPa^{1/2}$)와 유사한 용해도 매개변수의 MC($20.3MPa^{1/2}$), DF-1($24.2MPa^{1/2}$), DF-2($21.5MPa^{1/2}$)세정제가 3분 이내에 100%의 세정효율을 보였다. 그리고 솔더 세정에서는 -$20^{\circ}C$ 이하의 아닐린점인 CFC-113, MC, 1,1,1-TCE가 높은 세정효율을 보였다. 그리스 세정에서는 그리스의 용해도 매개변수($15.0{\sim}17.0\;MPa^{1/2}$)와 가장 유사한 DG-1 세정제($16.2\;MPa^{1/2}$)와 DG-2 세정제($15.5\;MPa^{1/2}$)의 세정효율이 비교적 저조하였고 습윤지수가 크고 아닐린 점이 낮은 CFC-113과 MC가 세정효율이 우수하였다. 본 연구를 통해 플럭스, 솔더, 그리스의 오염물을 세정하기 위해 글리콜 에테르계, 파라핀계 및 실록산계 물질을 알맞게 배합하여 CFC-113, MC, 1,1,1-TCE와 같은 규제물질을 대체할 수 있는 탄화수소계 세정제를 개발할 수 있었다. 그리고 습유지수, 아닐린점, 용해도 매개변수 등과 같은 세정성 영향을 검토하여 비수계 세정제의 세정성능을 예측하고 세정제의 배합에 적용할 수 있었다.

• 산업기술연구
• /
• 제37권1호
• /
• pp.12-15
• /
• 2017

It is important in dentistry that the provisional cement should be cleaned thoroughly from the crown before definitive cementation. The provisional cement has been removed by physical means such as curette, scaler, pumice, or sand-blasting with alumina particles, which is time-consuming, irritating, tedious, even causing crack. To avoid such troubles occurring through such physical cleaning means, the chemical solutions for dissolving the provisional cement remaining in dental crown were prepared, and solubilizing power of the solutions was measured and compared. The solution composed of MEA, NaOH, chloride chemicals ($CHCl_3$, $CCl_4$, $CH_2Cl_2$), surfactants (Igepal, Tween20), chelating agent (EDTA), and Ethyl cellosolve was most effective for dissolving the provisional cement.

• 수산해양기술연구
• /
• 제51권4호
• /
• pp.576-582
• /
• 2015

The efficiencies of thermal power system using fossil fuel depend on heat exchangers which extract energy from the exhaust gas before it is expelled to the atmosphere. To increase heat transfer efficiency it is very important to maintain the surface of heat exchanger as clean condition. The accepted skill of cleaning of fouled surface of heat exchanger is soot blowing. A high pressure jet of air is forced through the flat surface of plate to remove the deposit of fouling. There is, however, little knowledge of the fundamental principles of how the jet behave on the surface and how the jet actually removes the deposit. Therefore, the study focuses on the measuring of cleaning area and cleaning dwell time after accumulating the simulated deposit on the flat surface. The deposit test rig was built for the study and simulated deposit material is used after measuring the physical property of the each material by shearing stress test. Much data was obtained for the analysis by the parameters change such as the different jet speed, different inner pressure and variable distance of the jet from the test rig surface. The experimental data was compared with the theoretical equation and most of the data matches well except some extreme cases.

• 한국직업건강간호학회지
• /
• 제24권3호
• /
• pp.183-193
• /
• 2015

Purpose: The purpose of this study was to describe cleaning workers' working experiences in Korea. Methods: The data were collected in two focus-group interviews with 9 cleaning workers. The phenomenological analytic method suggested by Colaizzi was used to analyze the data. Results: Five theme clusters and thirteen themes emerged from the analysis. The first theme clusters, 'Dead-end choice' included Limits of elderly women workers, Financial difficulties, Lowered self-esteem. The second theme clusters, 'Facing with discriminatory working environments' included Fear and unfair working conditions. The third theme clusters, 'Potential health problems' included Physical overload, Repeated exposure to hazardous substances and Emotional labor. The fourth theme clusters, 'Excluded from protection of the law' included Gloomy reality and Sexual harassment. The fifth theme clusters, 'Desire to get out of social isolation' included Efforts to maintain the status, Desire to live confidently and Desire to change social recognition. Conclusion: The findings of the study provide understanding on cleaning workers' working experiences to explain by their vision and language and should ensure proper working conditions and environment to live a better life.