• 한국환경보건학회지
• /
• 제27권1호
• /
• pp.1-7
• /
• 2001

Ammonia is used in the manufacture of fertilizers, refrigerants, stabilizers and many household cleaning agents. These wide applications resulted in ammonia contamination in water. Ammonia can be removed from water by physical, biological, and chemical methods. Ozonation is effictive in the treatment of water with low concentration of ammonia. This study is undertaken to provide kinetic data for the ozonation of ammonia with or without hydrogen peroxide. The results were as follows; The destruction rate of ammonia increased gradually with the influent hydrogen peroxide concentration up to 0.23 mM and inhibited in the range of 0.23~11.4mM, and the maximum removal rate of ammonia achieved at 0.23mM of hydrogen peroxide, and the overall kinetics was first order. The combination effect of hydrogen and ozone to oxide ammonia in aqueous solution was better than ozone alone. The reacted ammonia was converted completely to nitrate ion.

• 환경위생공학
• /
• 제17권2호
• /
• pp.1-10
• /
• 2002

Ammonia is used in the manufacture of fertilizers, refrigerants, stabilizers and many household cleaning agents. The wide applications result in ammonia contamination in water. Ammonia can be removed from water by physical, biological, and chemical methods. Especially ozonation is effective in the treatment of water with low concentration of ammonia. Therefore, this study is undertaken to provide kinetic data for the ozonation of ammonia with bromide. The results were as follows; Ammonia oxidized by ozone with bromide catalysis. The denitrification rate of the ammonia increased proportionally to the concentration of bromide, and the overall reaction order was zero. It was also found that the effect of bromide ion concentration on the denitrification can be expressed by Monod type equation and there was no more effect above a proper bromide ion concentration. The reacted ammonia was converted completely to nitrate ion without bromide, but the denitrification of ammonia by ozone was conducted in the presence of bromide.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.297-298
• /
• 1999

Cemented carbides material (WC-Co hard alloy) were recognized very important and expensive tool or die assembly parts because of compose for the main elements of rare metal (W and Co etc). This research was developed to separate and recover of WC fine powder contained by WC-Co materials. Recycling process was a new method named by the Tin impregnation for decobaltification on cemented carbides. This reaction occurred to product a brittle Co-Sn intermetallic compounds, thereafter it carried out by acid cleaning solution and physical milling or powdering. New process was able to recover about 60％ WC fine powder from 1 to 5 ${\mu}{\textrm}{m}$.

• 보존과학연구
• /
• 통권26호
• /
• pp.5-25
• /
• 2005

A consideration number of investigation have begun to elucidate the essential role biological agents play in the deterioration of stone. What is becoming clear is that many factors affect the durability of stone. Physical, chemical, and biological agentsact in co-association, ranging from synergistic to antagonistic, to deteriorate stone. Biodeterioration has usually been considered to be a degradation process following the initial deterioration effects of inorganic agents, especially objects of cultural value such as pagoda, stature of Buddha etc. These agents were thought to condition stone surfaces for microbial contamination due to structural changes and enrichment of inorganic organic nutrient substrates. This report concentrates on the action of biodeteriogens from bacteria to algae and higher plants. Preventive and remedial methods are surveyed, as are a selection of chemical treatments.

• 패션비즈니스
• /
• 제11권5호
• /
• pp.155-164
• /
• 2007

Viscose rayon has advantages such as vivid luster, good dyeability, low static electricity, good absorbance and good spinnability but also has flaws such as easy crease and decrease of physical properties when it gets wetting, and it requires dry cleaning. Therefore in order to synthesize the polymer to solve the problems of rayon while keeping the advantages of it, this study made the high specific gravity polyester for ultra drape property and high contraction polyester for rayon-like fiber having volume, soft and warm sense. The polyester with high specific gravity, 1.47 was made by adding 7 wt% of $BaSO_4$ as additive. High contraction polyester was made by copolymerization by using IPA 5 mole% to increase the amorphous region as comonomer and also using Newpol BPE-20(NPE) 1.5 wt% not to decrease the properties.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.921-926
• /
• 1997

SOI(Silicon On lnsulator) technology is many advantages in the gabrication of MOS(Metal-Oxide Semiconductor) and CMOS(Complementary MOS) structures. These include high speed, lower dynamic power consumption,greater packing density, increased radiation tolearence et al. In smiple form of bonded SOL wafer manufacturing, creation of a bonded SOI structure involves oxidizing at least one of the mirror polished silicon surfaces, cleaning the oxidized surface and the surface of the layer to which it will be bonded,bringing the two cleanded surfaces together in close physical proximity, allowing the subsequent room temperature bonding to proceed to completion, and than following this room temperature joining with some form of heat treatment step,and device wafer is thinned to the target thickness. This paper has been performed to investigate the possibility of the bonded SOI wafer manufacturing Especially, we focused on the bonding quality and thinning method. Finally,we achieved the bonded SOI wafer that Si layer thickness is below 3 .mu. m and average roughness is below 5.angs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.118-122
• /
• 1992

In this paper, the properties of Thermally Stimulated Current was studied to understand carrier's behavior of $PVF_2$ film, to be regarded as the excellent piezo and pyroelectricity. The complex relaxation curve of Thermally Stimulated Current was divided into single relaxation style using Thermal Cleaning method. As a result of Applying the numerical method of asymtotic estimation to the divided single relaxation peak, we could calculated the physical factors related to charged particles of the specimen, more accurately.

• Applied Science and Convergence Technology
• /
• 제23권6호
• /
• pp.371-375
• /
• 2014

Diffusion coefficient of Fe in polycrystalline host ZnSe as a mid-IR gain medium has been measured in the annealing temperature ranges of 850 to $950^{\circ}C$. The synthesis of the samples was carried out in quartz ampoule in which the Fe thin film deposited by physical vapor evaporation method on the ZnSe. One can realize that the diffusion coefficient strongly depends on the surface active surfactants through the cleaning process and the substrate temperature during the thin film deposition leading to $2.04{\times}10^{-9}cm^2/s$ for $Fe^{2+}:ZnSe$. The Annealing temperature dependence of the Fe ions diffusion in ZnSe was used to evaluate the activation energy, $E_a$=1.39 eV for diffusion and the pre-exponential factor $D_0$ of $13.5cm^2/s$.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1997년도 심포지움시리즈 Jan-97 수처리용 분리막 기술 및 응용
• /
• pp.87-109
• /
• 1997

Reverse osmosis(R/O), ultrafiltration(UF) and microfiltration (MF) processes are widely used for water treatment. In the seminar, characteristics of typical membrane modules including tubular, hollow fiber, plate and frame and spiral wound types will be discussed in detail. The design methods based on hydrodynamics for hollow fiber and spiral wound modules will be introduced analytically. Concentration polarization (CP) and membrane fouling mechnism as well as the techniques for CP reduction will be handled. The CP control techniques contain chemically modified membrane surface, pretreatment of feed water, operation of low trans-membrane pressure, chemical or physical cleaning methods and artificial production of various fluid turbulences near the membrane surface, etc. In especially, the recent commercial membrane modules for CP control including module rotation, vibration and Taylor or Dean vortex system will be introduced and discussed in detail.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.302-307
• /
• 2002

In electropolishing, the ion from the surface of the metal is eliminated by means of an electrical potential and current. Electropolishing is being generally known as a replacement for mechanical finishing. In addition to making a surface smoother, it is a more visible means of brightening, deburring, cleaning, stress-relieving and improving the physical characteristics of most metals and alloys. Therefore, the aim of the present study is to investigate the characteristic of electropolishing STS304 and A12024 in terms of current density, polishing time and electrode gap, etc.