• Journal of Korean Society of Forest Science
• /
• v.90 no.2
• /
• pp.197-209
• /
• 2001

TOPMODEL, semi-distributed hydrological model, is frequently applied to predict the amount of discharge, main flow pathways and water quality in a forested catchment, especially in a spatial dimension. TOPMODEL is a kind of conceptual model, not physical one. The main concept of TOPMODEL is constituted by the topographic index and soil transmissivity. Two components can be used for predicting the surface and subsurface contributing area. This study is conducted for the validation of applicability of TOPMODEL at small forested catchments in Korea. The experimental area is located at Gwangneung forest operated by Korea Forest Research Institute, Gyeonggi-do near Seoul metropolitan. Two study catchments in this area have been working since 1979 ; one is the natural mature deciduous forest(22.0 ha) about 80 years old and the other is the planted young coniferous forest(13.6 ha) about 22 years old. The data collected during the two events in July 1995 and June 2000 at the mature deciduous forest and the three events in July 1995 and 1999, August 2000 at the young coniferous forest were used as the observed data set, respectively. The topographic index was calculated using $10m{\times}10m$ resolution raster digital elevation map(DEM). The distribution of the topographic index ranged from 2.6 to 11.1 at the deciduous and 2.7 to 16.0 at the coniferous catchment. The result of the optimization using the forecasting efficiency as the objective function showed that the model parameter, m and the mean catchment value of surface saturated transmissivity, $lnT_0$ had a high sensitivity. The values of the optimized parameters for m and InT_0 were 0.034 and 0.038; 8.672 and 9.475 at the deciduous and 0.031, 0.032 and 0.033; 5.969, 7.129 and 7.575 at the coniferous catchment, respectively. The forecasting efficiencies resulted from the simulation using the optimized parameter were comparatively high ; 0.958 and 0.909 at the deciduous and 0.825, 0.922 and 0.961 at the coniferous catchment. The observed and simulated hyeto-hydrograph shoed that the time of lag to peak coincided well. Though the total runoff and peakflow of some events showed a discrepancy between the observed and simulated output, TOPMODEL could overall predict a hydrologic output at the estimation error less than 10 %. Therefore, TOPMODEL is useful tool for the prediction of runoff at an ungaged forested catchment in Korea.

• Korean Journal of Ecology and Environment
• /
• v.40 no.2
• /
• pp.184-192
• /
• 2007

This study was to evaluate ecological health of Sumjin River during April${\sim}$June 2006. The ecological health assessments was based on the Index of Biological Integrity (IBI), Qualitative Babitat Evaluation Index (QHEI), and water chemistry. For the study, the models of IBI and QHEI were modified as 10 and 11 metric attributes, respectively. We also analyzed spatial patterns of chemical water quality over the period of $2002{\sim}2005$, using the water chemistry dataset, obtained from the Ministry of Environment, Korea. In Sumjin River, values of IBI averaged 33 (n= 12), which is judged as a "Fair${\sim}$Good" condition after the criteria of Barbour at al. (1999). There was a distinct spatial variation. Mean IBI score at Site 5 was estimated as 40, indicating a "Good" condition whereas, the mean at Site 3 was 23, indicating a "Poor${\sim}$Fair" condition. Habitat analysis showed that QHEI values in the river averaged 109 (n=6), indicating a "Marginal" condition after the criteria of Harbour et al. (1999). Values of BOD and COD averaged 1.3 mg $L^{-1}$ (scope: $0.9{\sim}1.8$ mg $L^{-1}$) and 3.3 mg $L^{-1}$ (scope: $2.8{\sim}4.0$ mg $L^{-1}$), respectively during the study. It was evident that chemical pollutions by organic matter were minor in the river. Total nitrogen (TN) and total phosphorus (TP) averaged 2.5 mg $L^{-1}$ and 0.067 mg $L^{-1}$, respectively, and the nutrients did not show large longitudinal gradients between the upper and lower reach. Overall, dataset of IBI, QHEI, and water chemistry suggest that river health has been well maintained, compared to other major watersheds in Korea and should be protected from habitat disturbance and chemical pollutions.

• Journal of Life Science
• /
• v.19 no.2
• /
• pp.219-227
• /
• 2009

The antifatigue and endurance promoting properties of two Korean medicinal herb extracts and molasses with various mineral components were studied by evaluating forced-swimming capacity and biochemical parameters in ICR mice. The treatment groups were orally administered mineral beverages which were contained 6% sugar with the mixture of Maesil (Prunus mume fruit) extracts, Omija (Schisandra chinensis fruit) extracts and molasses for 4 weeks. The exercised forced-swimming tests were conducted after 28 days of beverage supplementation. The swimming times to exhaustion were longer 1.5${\sim}$2 times in group 6 and group 10 than control goup (Control: 93.2${\pm}$10.4 sec; Beverage 6; 190.8${\pm}$25.6 sec, Beverage 10; 173.6${\pm}$21.8 sec; p<0.05). Moreover, the activity of hexokinase (Control: 5.23${\pm}$0.38 ${\mu}mol$l/g tissue; Beverage 6: 5.99${\pm}$0.18 ${\mu}mol$/g tissue, Beverage 10: 6.13${\pm}$0.25 ${\mu}mol$/g tissue, p<0.05) and citrate synthase (control: 42.9${\pm}$1.87 ${\mu}mol$/g tissue; Beverage 6: 56.8${\pm}$3.98 ${\mu}mol$/g tissue, Beverage 10; 59.5${\pm}$3.09 ${\mu}mol$/g tissue, p<0.05) were also significantly higher than those of control group. Even if the treatment groups had long swimming than control group, there is no significant difference in the glycogen contents of gastrocnemus muscle or liver between the control group and each treatment group. This demonstrated an improvement in endurance. These results suggest that reported herbal beverage is very effective to combat fatigue, improve endurance and increase overall physical activity.

• Korean Journal of Poultry Science
• /
• v.36 no.2
• /
• pp.149-155
• /
• 2009

The present study was conducted to compare the carcass yields and meat characteristics of three types of commercial male chicks White mini broilers, Ross broilers and Hy-Line brown chicks under the identical feeding condition. One-hundred 1-d chicks of each type were randomly placed into four pens per group (25 chicks per pen) and fed corn-soybean meal based commercial diets for 35d, 18d or 49d, respectively. At the end of the feeding trial, the birds were sacrificed and subjected to carcass measurements. The dressing percentages of White mini broilers and Ross broilers were significantly higher (P<0.05) than that of Hy-Line brown cockerels. The rate of breast meat of Hy-Line brown cockerels was significantly lower (P<0.05) than those of White mini broilers and Ross broilers. However, Hy-Line brown cockerels showed higher (P<0.05) leg meats than the others. There were no significant differences in serum total cholesterol and the activities of glutamic-oxaloacetic transaminase and glutamic-pyruvic transaminase among the groups. The breast meats of White mini broilers presented highest lightness value. The yellowness of breast and redness of leg meats of White mini broilers and Ross broilers were significantly higher (P<0.05) than those of Hy-Line brown cockerels. There were no significant differences in the SOD-like activity and change of pH in edible meats among the groups. The meat color in White mini broilers was significantly higher than that of Hy-Line brown cockerels. No significant differences were observed in term of flavor, tenderness and overall acceptability. In conclusion, the physico-chemical properties and sensory characteristics of edible meats were not greatly affected by genotype if they were similar body weights and kept under the identical feeding condition. But the Hy-Line brown cockerels were less desirable as a meat-type strain due to lower carcass yields and inferior growth and feed conversion ratio.

• Radiation Oncology Journal
• /
• v.29 no.2
• /
• pp.107-114
• /
• 2011

Purpose: To assess the degree and clinical impact of location error of the dens on the X-axis during radiotherapy to brain and head and neck tumors. Materials and Methods: Twenty-one patients with brain tumors or head and neck tumors who received three-dimensional conformal radiation therapy or intensity-modulated radiation therapy from January 2009 to June 2010 were included in this study. In comparison two-dimensional verification portal images with initial simulation images, location error of the nasal septum and the dens on the X-axis was measured. The effect of set-up errors of the dens was simulated in the planning system and analyzed with physical dose parameters. Results: A total of 402 portal images were reviewed. The mean location error at the nasal septum was 0.16 mm and at the dens was 0.33 mm (absolute value). Location errors of more than 3 mm were recorded in 43 cases (10.7%) at the nasal septum, compared to 133 cases (33.1%) at the dens. There was no case with a location error more than 5 mm at the nasal septum, compared to 11 cases (2.7%) at the dens. In a dosimetric simulation, a location error more than 5 mm at the dens could induce a reduction in the clinical target volume 1 coverage (V95: 100%${\rightarrow}$87.2%) and overdosing to a critical normal organ (Spinal cord V45: <0.1%${\rightarrow}$12.6%). Conclusion: In both brain and head and neck radiotherapy, a relatively larger set-up error was detected at the dens than the nasal septum when using an electronic portal imaging device. Consideration of the location error of the dens is necessary at the time of the precise radiation beam delivery in two-dimensional verification systems.

• Progress in Medical Physics
• /
• v.9 no.3
• /
• pp.137-141
• /
• 1998

The purposes of this report are to evaluate whether lead ball and steel ball could be used as protective material of radiation and to acquire physical data of them for protecting 4-10 MV X-ray beams. Lead balls of diameter 2.0～2.5mm or steel balls of diameter 1.5～2.0 mm were filled in an acrylic box of uniform width. An MV radiograph of metal balls in a box were taken to ascertain uniformity of ball distribution in the box. Average density of metal ball and linear attenuation coefficient of metal balls for 4～10 MV X -rays were measured. At the time of measurement of linear attenuation coefficient, Farmer ionization chamber was used and to minimize the scatter effect, distance between the ball and the ionization chamber was 70 cm and field size was 5.5cm${\times}$5.5cm. For comparison, same parameters of lead and steel plates were measured. The distribution of metal balls was uniform in the box. The density of a mixture of lead-air was 6.93g/cm$^3$, 0.611 times density of lead, and the density of a mixture of steel-air was 4.75g/cm$^3$, 0.604 times density of steel. Half-value layers of a mixture of lead-air were 1.89 cm for 4 MV X-ray, 2.07 cm for 6 MV X-ray and 2.16 cm for 10 MV X-ray, and approximately 1.64 times of HVL of lead plate. Half-value layers of a mixture of steel-air were 3.24 cm for 4 MV X-ray, 3.70 cm for 6 MV X-ray and 4.15 cm for 10 MV X-ray, and approximately 1.65 times of HVL of lead plate. Metal balls can be used because they could be distributed evenly. Average densities of mixtures of lead-air and steel-air were 6.93g/cm$^3$, 4.75g/cm$^3$ respectively and approximately 1.65 times of densities of lead and steel. Product of density and HVL for a mixture of metal-air are same as the metal.

• Journal of Nutrition and Health
• /
• v.43 no.2
• /
• pp.171-180
• /
• 2010

This study aims at investigating the health and nutritional status of the adults according to frequency of eating out. One day food intake data were collected by 24 hr recall dietary survey and body size, blood pressure and some blood lipids and other constituents were measured on 137 Daejeon metropolitan citizens 20 yrs old and above who visited Chungnam National University Hospital for physical examination during the period of December 6, to December 15, 2008. The frequency of eating out were categorized into four levels: less than once a week, once a week, 2-3 times a week, 4 times a week and above. Body mass Index, waist circumference, blood pressure, blood lipid, blood glucose, GPT and GOT did not showed any significant difference according to the frequency of eating out of the subjects. Though, systolic blood pressures and serum levels of total cholesterol and LDL-cholesterol showed a little tendency to be high in the subjects eating out 2-3 times a week. In the contrary, serum triglyceride level tended to be low in the same group. The subjects eating out 4 times a week and over took more total protein, animal protein, animal fat, phosphorus and vitamin $B_2$ than any other group. Also protein energy ratio was the highest in the group eating out 4 times a week and above and they took more animal food group, other food group, beverages teas and alcohols than other groups eating out. These results showed that higher frequency of eating out leads to higher intake of protein, fat, phosphorus, animal food groups and other food groups (oils, beverages, seasonings) and to lower intake of vitamin C and plant food groups. It, thus, suggested that the strategy for restaurant business is required to provide the menu substituted animal food by more plant food.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.67-72
• /
• 2018

This study was conducted to investigate a potential of Yellow poplar (Liriodendron tulipifera L.) as a raw material for the manufacturing of particleboard (PB) and oriented strandboard (OSB). PB panels were prepared at the parameters of $0.7g/cm^3$ density, 15 mm thickness, three-layer, $E_1$ grade urea-formaldehyde (UF) resin, emulsion wax, and hardener. OSB panels were manufactured with a density of $0.65g/cm^3$, thickness of 10 mm, and $E_1$ grade of UF resin. Particle size of the face layer of PB was 20~80 mesh with 7~9% moisture content (MC), while that of core-layer was 3~20 mesh with 3~5% MC, which was similar to the production condition of commercial PB. As a result, the manufactured PB panels with 15.8 mm thickness, $0.7g/cm^3$ density, and 5.8% MC satisfied the requirement of bending strength of 15 type PB of Korean Industrial Standard (KS F 3104). Both internal bonding (IB) strength and surface screw withdrawal resistance also satisfied the requirement of 18 type PB of the standard. But, the edge screw withdrawal resistance satisfied the requirement of 15 type PB of the standard. These differences in properties could be due to the slenderness ratio of raw particles. In case of OSB panels with 10.7 mm thickness, $0.68g/cm^3$ density, and 5.8% MC satisfied all the requirements of bending strength, screw withdrawal resistance, and IB strength of 18 type PB of the standard. These results suggest that Yellow poplar wood has a good potential as a raw material for the production of PB and OSB.

• Journal of dental hygiene science
• /
• v.14 no.2
• /
• pp.114-122
• /
• 2014

The purpose of this study was to analyze the effect of mediating variables on the relationship between job stress and stress response. A survey was conducted to 243 clinical dental hygienists from January 15, 2013 to March 20, 2013 and the data were analyzed using t-test, one-way ANOVA, Pearson's correlation analysis, and hierarchical multiple regression analysis. The subjects who worked in poor working environment, had high level of role conflict and overload and aggressive nature showed high stress responsivity (p<0.01). The variable that showed mediation effect on the relationship between job stress and physical discomfort, depression was shown to be personality type (p<0.05). Also, the variable that showed mediation effect on the relationship between job stress and turnover intention was social support (p<0.05). According to the results, personality type and social support were shown to be important parameters when it came to the relationship between job stress and stress response. Therefore, in order to reduce negative outcomes caused by stress, it is suggested to provide an educational opportunity on self-control management while increasing social support from the organizational and structural level. Especially, it is asked to expand the system that provides encouragement and recognition to feel the sense of achievement in the course of their duty execution.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.863-870
• /
• 2016

We investigated the physical/chemical phenomena that a slow loss of $CO_2$ inventory into sodium after the sodium-$CO_2$ boundary failure in printed circuit heat exchangers (PCHEs), which is considered for the supercritical $CO_2$ Brayton cycle power conversion system of a sodium-cooled fast reactor (SFR). The first phenomenon is plugging inside narrow sodium channels by micro cracks and the other one is damage propagation referred to as wastage combined with the corrosion/erosion effect. Experimental results of plugging shows that sodium flow immediately stopped as $CO_2$ was injected through the nozzle at $300{\sim}400^{\circ}C$ in 3 mmID sodium channels, whereas sodium flow stopped about 60 min after $CO_2$ injection in 5 mmID sodium channels. These results imply that if pressure boundary of sodium-$CO_2$ fails a narrow sodium channel would be plugged by reaction products in a short time whereas a relatively wider sodium channel would be plugged with higher concentration of reaction products. Wastage by the erosion effect of $CO_2$ (200~250 bar) hardly occurred regardless of the kinds of materials (stainless steel 316, Inconel 600, and 9Cr-1Mo steel), temperature ($400{\sim}500^{\circ}C$), or the diameter of the $CO_2$ nozzle (0.2~0.8 mm). Velocities at the $CO_2$ nozzle were specified as Mach 0.4~0.7. Our experimental results are expected to be used for determining the design parameters of PCHEs for their safeties.