• Proceedings of the Ginseng society Conference
• /
• 1987.06a
• /
• pp.89-107
• /
• 1987

For the elucidation of significance of saponin as quality criterion of ginseng ginsenoside content(GC) and ginsenoside pattern similarity(GPS) by simple correlation were investigated in relation to red ginseng quality factors, age, plant part, harvest season, mineral nutrition, soil physical characteristics, growth light and temperature, shading material, growth location, physiological disease and crop stand through survey of ginseng plantstions, field experiments, water culture and phytotron experiments. Effect of tissue culture was also reviewed. GC was negatively correlated with good quality of red ·ginseng and positively with bad quality. Age did not show any consistency with GC but GPS was less with the increase of age difference. GPS was less or not significant between taproot that is lowest in GC and epidermis highest, and significant between leaf and taproot. Harvest season marked with the lowest GC and Pattern was also different. Nutrient imbalance, the increase of hazardous soil nutrient and physical condition to growth increased GC, but GPS was little different. The higher the growth lights intensity and temperature the higher the GC but GPS was little changed. Root rust increased GC, but root scab decreased it. Sponge-like and inside cavity phenomena increased GC. Ginsenoside pattern of cultured tissues and rootlet showed great variation. These results strongly indicate that there are optimum saponin content and ginsenoside pattern and that these are accomplished under the optimum growth condition.

• Fashion & Textile Research Journal
• /
• v.10 no.2
• /
• pp.236-241
• /
• 2008

Hair manicure is usually and widely operated in the area of hair-dyeing by the reason that acidic hair color is less damaged and more stable than other chemical color treatment. However, there is no an in-depth study to prove them. This study purposes to provide basic resources for effectively using products of hair manicure by experiments on Physical Properties of Hair. Hair of one healthy woman in mid-20's, Level 4, was sampled for experiments. For the tests, hair samples were classified by the frequency of hair manicure treatment The control group(a), once treatment(b), twice(c), three times(d), four times(e) and five times(f). The results were measured with Scanning Electron Microscopy(SEM) and Tensile Strength and Elongation test. The lower Values of Tensile Strength according to repeated hair manicure treatment. Elongation is not affected by the frequency of hair manicure treatment. There was no remarkable change of hair surface in once(b) and twice(c) treatment. The change of hair surface which was able to judge by cuticle layers looseness, tunics and the transformation of cuticle cell were observed in the hair samples operating more than three times(d) of hair manicure treatment.

• Journal of Fashion Business
• /
• v.9 no.6
• /
• pp.101-116
• /
• 2005

The study with the subjects of the female consumers of the fomentation rooms in their 20s, this research made an investigation of the fomentation wear. Also, dye-fastness experiments of the wear's colors against washing and sweating were held. The following are the conclusions; 1. Survey Results of the Present Situations of Fomentation Wear Designs of the fomentation wear, 88% belonged to a T-shirt (upper clothes) and knee pants. The primary colors of the wear were in the order of gray (37.5%), white (31.3%), orange (25%), indigo (18.8%), and yellowish (18.8%). 43% of the wear companies used the same color for two-piece clothes, and 57% employed different colors for upper and lower clothes. 2. Consumers' Attitude about Fomentation Wear The key problem in the attitude to the wear, 25.9% pointed out the worries about physical exposure (like breasts and legs) owing to the improperness in designs and sizes. 32.8% of the subjects were also worried about physical silhouette exposure following sweating. The need for design improvement was felt as the subjects expressed their intention to use better fomentation wear in design and materials if the fare is higher. 3. Experimental Results of the Dye fastness of the Fomentation Wear Dye-fastness experiments by sweating appeared in the order of gray > white > pink. The results by washing were gray & white > pink. As laundry grew in number, the grade of dye fastness fell a little bit. In the fomentation environment with more laundry and more perspiration, dye fastness of the wear's colors against washing and sweating should be fully considered.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.2
• /
• pp.175-184
• /
• 2021

Objective: Fatigue can decrease both quality of life and work efficiency. Ginseng is one of the most popular herbal treatments for improving personal health, with applications in treating fatigue. However, the exact mechanisms of anti-fatigue effects are still unclear. Thus, we investigated the effect of red ginseng powder (RGP) on exercise capacity and peripheral fatigue using both behavioral and molecular experiments in mice. Design: Four-groups behavioral and molecular experiment. Methods: Male 6-weeks-old ICR mice were treated with distilled water, 100, and 200 mg/kg RGP for 5 days via oral administration. The exercise capacity of each animal group was measured by locomotor activity, rota-rod, hanging wire, and cold swimming tests. Additionally, after performing the treadmill to induce fatigue, lactate expression and molecular experiments were investigated using mice gastrocnemius. Results: Mice treated with RGP exhibited increased exercise capacity in the behavioral tests. Additionally, RGP induced a dose-dependent decrease in lactate levels after high-intensity exercise, and Monocarboxylate transporter (MCT) 4 expression increased in groups treated with RGP. However, there was no significant change in MCT1. Conclusions: These results suggest that RGP exerts several anti-fatigue properties by lower lactate and improved exercise capacity. Increased MCT4 expression may also affect lactate transport. Thus, this study suggests that the anti-fatigue properties of RGP might be associated with MCT4 activity.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.548-554
• /
• 2016

Optimal range of soil physical quality to enhance crop productivity or to improve environmental health is still in dispute for the upland soil. We hypothesized that the optimal range might be established by comparing soil physical parameters and their interactions inhibiting crop growth. The parameter identifying optimal range covered favorable conditions of aeration, permeability and root extension. To establish soil physical standard two experiments were conducted as follows; 1) investigating interactions of bulk density and aeration porosity in the laboratory test and 2) determining effects of soil compaction and deep & conventional tillage on physical properties and crop growth in the field test. The crops were Perilla frutescens, Zea mays L., Solanum tuberosum L. and Secale cereael. The saturated hydraulic conductivity, bulk density from the root depth, root growth and stem length were obtained. Higher bulk density showed lower aeration porosity and hydraulic conductivity, and finer texture had lower threshold bulk density at 10% aeration bulk density. Reduced crop growth by subsoil compaction was higher in silt clay loam compared to other textures. Loam soil had better physical improvement in deep rotary tillage plot. Combined with results of the present studies, the soil physical quality was possibly assessed by bulk density index. Threshold subsoil bulk density as the upper value were $1.55Mg\;m^{-3}$ in sandy loam, $1.50Mg\;m^{-3}$ in loam and $1.45Mg\;m^{-3}$ in silty clay loam for optimal soil physical quality in upland.

• Physical Therapy Korea
• /
• v.28 no.1
• /
• pp.65-71
• /
• 2021

Background: The hamstring is a muscle that crosses two joints, that is the hip and knee, and its flexibility is an important indicator of physical health in its role in many activities of daily living such as sitting, walking, and running. Limited range of motion (ROM) due to hamstring tightness is strongly related to back pain and malfunction of the hip joint. High-frequency diathermy (HFD) therapy is known to be effective in relaxing the muscle and increasing ROM. Objects: To investigate the effects of HFD on active knee extension ROM and hamstring tone and stiffness in participants with hamstring tightness. Methods: Twenty-four participants with hamstring tightness were recruited, and the operational definition of hamstring tightness in this study was active knee extension ROM of below 160° at 90° hip flexion in the supine position. HFD was applied to the hamstring for 15 minutes using the WINBACK device. All participants were examined before and after the intervention, and the results were analyzed using a paired t-test. The outcome measures included knee extension ROM, the viscoelastic property of the hamstring, and peak torque for passive knee extension. Results: The active knee extension ROM significantly increased from 138.8° ± 9.9° (mean ± standard deviation) to 143.9° ± 10.4° after the intervention (p < 0.05), while viscoelastic property of the hamstring significantly decreased (p < 0.05). Also, the peak torque for knee extension significantly decreased (p < 0.05). Conclusion: Application of HFD for 15 minutes to tight hamstrings immediately improves the active ROM and reduces the tone, stiffness, and elasticity of the muscle. However, further experiments are required to examine the long-term effects of HFD on hamstring tightness including pain reduction, postural improvement around the pelvis and lower extremities, and enhanced functional movement.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.2
• /
• pp.61-69
• /
• 2002

Daylighting is a powerful vehicle of architectural expression and provides buildings a living quality due to constantly changing properties in intensity and color. As an environmental system, daylighting should be subjected to the same level of rigorous analysis and review that any environmental system receives. For example, increasing cooling loads and causing visual displeasure are easily occurred owing to the excessive sunlight through windows. Therefore, daylighting performance attributes and physical characteristics must be described qualitatively and quantitatively in early design process. In various architectural daylighting performance evaluation methods, the scale model experiment can be applied due to it's simplicity and usefulness. So, this study aims to evaluate the validation of scale model experiments in architectural daylighting performance. For the purpose, two scale model experiments under clear sky are conducted. And, the validation of the experiments are evaluated by computer simulations.

• Journal of the Korean Society of Safety
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2021

To simulate a process model in the field of chemical engineering, it is very important to identify the physical properties of novel materials as well as existing materials. However, it is difficult to measure the physical properties throughout a set of experiments due to the potential risk and cost. To address this, this study aims to develop a property prediction model based on the group contribution method for aromatic chemical compounds including benzene rings. The benzene rings of aromatic materials have a significant impact on their physical properties. To establish the prediction model, 42 important functional groups that determine the physical properties are considered, and the total numbers of functional groups on 147 aromatic chemical compounds are counted to prepare a dataset. Support vector regression is employed to prepare a prediction model to handle sparse and high-dimensional data. To verify the efficacy of this study, the results of this study are compared with those of previous studies. Despite the different datasets in the previous studies, the comparison indicated the enhanced performance in this study. Moreover, there are few reports on predicting the physical properties of aromatic compounds. This study can provide an effective method to estimate the physical properties of unknown chemical compounds and contribute toward reducing the experimental efforts for measuring physical properties.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1887-1895
• /
• 2013

In this study, physical experiments were performed in a two-dimensional wave flume to investigate the hydraulic and structural performance of a SFT model. The experiments were made by generating regular waves of different heights and periods under various conditions of buoyancy to weight ratio (BWR) and water depth as well. Through the analysis of the experimental data, it was clarified that the sway and heave motions of the tunnel body linearly increased with wave height and period. In contrast, the roll motion was rather insignificant unless wave height and period were comparatively large as the design wave. Similarly proportional relationship with respect to wave height and period was obtained in case of the maximum tensile force acting on the tension legs and the wave loads on the tunnel body. Regarding the change of water depth or BWR conditions, generally decreasing trend was obtained according to increase of water depth but decrease of BWR for both of the magnitudes of structural behaviors or wave loadings on the SFT structure.

• The Journal of Engineering Geology
• /
• v.23 no.3
• /
• pp.271-281
• /
• 2013

Freeze-thaw experiments were conducted to evaluate changes in surface roughness and physical properties in samples of granite from Ilgwang and Imki mines, Korea. The temperature range in the experiments was $-20^{\circ}C$ to $40^{\circ}C$, based on typical summer and winter temperatures in Korea, and the surface was observed every 20 cycles. One cycle comprised 1 hour of heating or cooling of the samples and 1 hour during which the target temperature was maintained. With increasing repetitions of the freeze-thaw experiment, porosity increased by 0.05%-0.15% in the two samples and the dry weight increased, whereas the volume of the soil and saturation weight decreased. Observations by confocal laser scanning microscope (CLSM) revealed that line and surface roughness parameters showed a tendency to increase and decrease, respectively, with elapsed time. Changes in surface roughness were apparent on the CLSM images.