• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.449-457
• /
• 2012

The program/erase (P/E) cyclic endurances including bias temperature instability (BTI) behaviors of Metal-$Al_2O_3$-Nitride-Oxide-Semiconductor (MANOS) memories are investigated in comparison with those of Semiconductor-Oxide-Nitride-Oxide-Semiconductor (SONOS) memories. In terms of BTI behaviors, the SONOS power-law exponent n is ~0.3 independent of the P/E cycle and the temperature in the case of programmed cell, and 0.36~0.66 sensitive to the temperature in case of erased cell. Physical mechanisms are observed with thermally activated $h^*$ diffusion-induced Si/$SiO_2$ interface trap ($N_{IT}$) curing and Poole-Frenkel emission of holes trapped in border trap in the bottom oxide ($N_{OT}$). In terms of the BTI behavior in MANOS memory cells, the power-law exponent is n=0.4~0.9 in the programmed cell and n=0.65~1.2 in the erased cell, which means that the power law is strong function of the number of P/E cycles, not of the temperature. Related mechanism is can be explained by the competition between the cycle-induced degradation of P/E efficiency and the temperature-controlled $h^*$ diffusion followed by $N_{IT}$ passivation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.257-257
• /
• 2016

최근에 메모리의 초고속화, 고집적화 및 초절전화가 요구되면서 resistive random access memory (ReRAM), ferroelectric RAM (FeRAM), phase change RAM (PRAM)등과 같은 차세대 메모리 기술이 활발히 연구되고 있다. 다양한 메모리 중에서 특히 resistive random access memory (ReRAM)는 빠른 동작 속도, 낮은 동작 전압, 대용량화와 비휘발성 등의 장점을 가진다. ReRAM 소자는 절연막의 저항 스위칭(resistance switching) 현상을 이용하여 동작하기 때문에 SiOx, AlOx, TaOx, ZrOx, NiOx, TiOx, 그리고 HfOx 등과 같은 금속 산화물에 대한 연구들이 활발하게 이루어지고 있다. 이와 같이 다양한 산화물 중에서 AlOx는 ReRAM의 절연막으로 적용되었을 때, 우수한 저항변화특성과 안정성을 가진다. 하지만, AlOx 박막을 형성하기 위하여 기존에 많이 사용되어지던 PVD (physical vapour deposition) 또는 CVD (chemical vapour deposition) 방법에서는 두께가 균일하고 막질이 우수한 박막을 얻을 수 있지만 고가의 진공장비 사용 및 대면적 공정이 곤란하다는 문제점이 있다. 한편, 용액 공정 방법은 공정과정이 간단하여 경제적이고 대면적화가 가능하며 저온에서 공정이 이루어지는 장점으로 많은 관심을 받고 있다. 본 연구에서는 sputtering 방법과 용액 공정 방법으로 형성한 AlOx 기반의 ReRAM에서 메모리 특성을 비교 및 평가하였다. 먼저, p-type Si 기판 위에 습식산화를 통하여 SiO2 300 nm를 성장시킨 후, electron beam evaporation으로 하부 전극을 형성하기 위하여 Ti와 Pt를 각각 10 nm와 100 nm의 두께로 증착하였다. 이후, 제작된 AlOx 용액을 spin coating 방법으로 1000 rpm 10 초, 6000 rpm 30 초의 조건으로 증착하였다. Solvent 및 불순물 제거를 위하여 $180^{\circ}C$의 온도에서 10 분 동안 열처리를 진행하였고, 상부 전극을 형성하기 위해 shadow mask를 이용하여 각각 50 nm, 100 nm 두께의 Ti와 Al을 electron beam evaporation 방법으로 증착하였다. 측정 결과, 용액 공정 방법으로 형성한 AlOx 기반의 ReRAM에서는 기존의 sputtering 방법으로 제작된 ReRAM에 비해서 저항 분포가 균일하지는 않았지만, 103 cycle 이상의 우수한 endurance 특성을 나타냈다. 또한, 1 V 내외로 동작 전압이 낮았으며 104 초 동안의 retention 측정에서도 메모리 특성이 일정하게 유지되었다. 결론적으로, 간단한 용액 공정 방법은 ReRAM 소자 제작에 많이 이용될 것으로 기대된다.

• Advanced Composite Materials
• /
• v.18 no.4
• /
• pp.315-326
• /
• 2009

PCC (precipitated calcium carbonate) and ground calcium carbonate have been widely used in alkaline papermaking. Unfortunately, although increasing filler level in papers can improve the paper properties such as brightness, opacity, stiffness gloss, smoothness, porosity, and printability, as well as decrease cost, some strength of the paper is negatively affected. In this research, needle-like aragonite was synthesized using $Ca(OH)_2$ and $CO_2$ as reactants in the presence of $MgCl_2$ and characterized with scanning electronic microscopy (SEM) and X-ray diffraction (XRD). The physical and optical properties of the paper handsheets containing these needle-like aragonite fillers were evaluated. Results indicated that tensile strength, Z-direction tensile strength and folding endurance of the paper were improved by the needle-like aragonite crystals compared to the paper using commercial PCC (precipitated calcium carbonate) as filler. The stiffness of the paper handsheet on the machine direction was increased, but no evident difference in the cross direction was found. The improvement of paper strength mainly resulted from the twining effect between the aragonite whiskers and paper fibers. The optical properties of the paper were slightly decreased with the use of the needle-like aragonites compared to commercial PCC. These results suggest that paper cost can be decreased by increasing the content of needle-like aragonite filler while paper strength will not be decreased compared to PCC filler.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.20.1-20.1
• /
• 2011

The nano-sized quantum structure has been an attractive candidate for investigations of the fundamental physical properties and potential applications of next-generation electronic devices. Metal nano-particles form deep quantum wells between control and tunnel oxides due to a difference in work functions. The charge storage capacity of nanoparticles has led to their use in the development of nano-floating gate memory (NFGM) devices. When compared with conventional floating gate memory devices, NFGM devices offer a number of advantages that have attracted a great deal of attention: a greater inherent scalability, better endurance, a faster write/erase speed, and more processes that are compatible with conventional silicon processes. To improve the performance of NFGM, metal nanocrystals such as Au, Ag, Ni Pt, and W have been proposed due to superior density, a strong coupling with the conduction channel, a wide range of work function selectivity, and a small energy perturbation. In the present study, bismuth metal nanocrystals were self-assembled within high-k $Bi_2Mg_{2/3}Nb_{4/3}O_7$ (BMN) films grown at room temperature in Ar ambient via radio-frequency magnetron sputtering. The work function of the bismuth metal nanocrystals (4.34 eV) was important for nanocrystal-based nonvolatile memory (NVM) applications. If transparent NFGM devices can be integrated with transparent solar cells, non-volatile memory fields will open a new platform for flexible electron devices.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.2
• /
• pp.286-291
• /
• 1997

The purpose of this study is to examine the effect of clothing habits wearing cool or warm in daily life on motor ability. A group of ten healthy young females were divided into a cold (C) group and a warm (W) group. From autumn to winter, C group was advised to wear cool clothing, and W group, warm Clothing. The subject's physical fitness were tested in October, initial stage of the clothing training and March of the following year, final stage of the training. The measurements were taken after the subjects rested in a thermoneutral room conditioned at 23$\pm$2$^{\circ}C$ over 1 hour. The test items were weight, skinfold thickness, grip strength (right, left), back-lift strength, vertical jump, sit-ups, Irosmax, side step test, single-foot standing test with eyes closed, and standing trunk flexion. Changes in motor ability of each group between initial stage and final stage of the training were compared. 1. Muscle strength, part of the motor revelation capacity, showed no significant change in the both ,Troops. On the other hand, strength and power showed a decrease in the both groups and C group showed a sharp decrease. 2. Muscular endurance and cardio-pulmonary fitness, part of the motor continuation capacity, were increased after the training and the degree of increase was great in C group. 3. C group showed significant increase in motor coordination capacity including agility, balance, and flexibility after the training, while Wgroup showed significant increases only in balance. 4. Weight and skinfold thickness as a part of the physique showed no significant change.

• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.475-486
• /
• 2008

In this study, fire-retardant chemicals were melt with mixed composition ratios of dibasic ammonium phosphate and each half of boric acid and borax in hot water, in which hammer-milled chips were immersed to increase swelling of waste particleboards. Also, fire-retardant treated particles from sawn lumber chip and recycled particleboard chip were composed in ratio of 70:30 in core layer to improve boards' properties. Retention ratio of fire-retardant chemicals for the particles for face layer was high due to high specific surface area, and that of sawn lumber chips was somewhat higher than that of recycled particleboard chips. The mixture of particles from sawn lumber chips and recycled PB of 70:30 in weight ratio exceeded bending strength of 100 $kgf/cm^2$. It seemed that the relatively greater portions of dibasic ammonium phosphate affected adversely to dimensional stability, however fire-retardants treatment resulted in distinct effect lowering formaldehyde emission such as $E_0$ type(0.5mg/$\ell$ or less) in KS F 3104. In fire-retardancy, the recycled boards with a mixed ratio of dibasic ammonium phosphate to boric acid borax(50:50 mixture) of 70% to 30% in weight satisfied fire-retardancy 3rd grade in KS F 2271, and also this composition from cone calorimeter test met same standard grade figuring total heat release of 4.6MJ/$m^2$.

• PNF and Movement
• /
• v.15 no.3
• /
• pp.333-341
• /
• 2017

Purpose: This study was to explore the effects of trunk exercise using PNF combined with treadmill training on balance and walking ability in patients with Parkinson's disease. Methods: This study included 16 patients with Parkinson's disease. Participants were randomly assigned to 2 groups: an experimental group (n=8) and a control group (n=8). All participants underwent treadmill training for 30 minutes. In addition, the experimental group (trunk exercise using PNF) and control group (conventional training) participated in a 30-minute exercise program. Both groups performed the training 5 times per week for 4 weeks. Disease severity (determined using the unified Parkinson's disease rating scale motor subscale, UPDRS-3), balance (determined using the Berg balance scale, BBS), walking speed (determined using the 10-meter walking test, 10MWT), and walking endurance (determined using the 6-minute walking test, 6MWT) were measured at baseline and after 4 weeks. Results: Pre- to post-intervention improvement was noted on all outcome measures for both groups (p<0.05). Post-intervention, there was a significant improvement in the experimental group as compared to the control group for the following measured outcomes (p<0.05): UPDRS-3 (p=0.03; 95% CI, -5.52 to -0.24), BBS (p=0.04; 95% CI, 0.59 to 6.45), 10MWT (p=0.01; 95% CI, -2.19 to -0.42), and 6MWT (p=0.04; 95% CI, 1.81 to 96.72) Conclusion: The results of this study revealed that trunk exercise using PNF plus treadmill training improves balance and walking ability as compared to conventional training plus treadmill training in patients with Parkinson's disease.

• The Journal of Internal Korean Medicine
• /
• v.40 no.6
• /
• pp.1136-1144
• /
• 2019

Objective: Physical inactivity contributes to mortality rates and is now the fourth most frequent cause of death worldwide. Red ginseng is a medicinal herb that is often used as an ergogenic aid. In this study, red ginseng was administered to rats to test whether it affected their ability to exercise. Methods: Forty-five rats were randomly distributed and divided into five groups: normal (N, n=5), control (C, n=10), the group to which only red ginseng was administered (H, n=10), the group to which only amino acid complex was administered (A, n=10), and the group to which both red ginseng and amino acid complex were administered (HA, n=10). Once a day for three weeks, 333.3 mg/kg body weight per day (b.w./day) of red ginseng and 750 mg/kg b.w./day of amino acid preparation were administered to rats. After three weeks, body weight, swimming time, and the weight of the anterior tibialis muscle of rat were measured. Blood was taken for analysis using the cardiac puncture method. Results: The swimming time of group H (921.3±199.26 sec) showed significant improvement compared to that of group C (798.48±156.37 sec) (p<0.05). Conclusion: Red ginseng has improved swimming time in rat and can be used as an effective ergogenic aid.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.111-116
• /
• 2006

The microstickes control effects of some fixing agents, including an inorganic PAC, an organic polyamine (PA) and polydiallydimethyl ammonium chloride (Pdadmac), and a high cationic starch (HCS), were investigated, together with their effects on wet end performances and physical properties of handsheets. Despite that the HCS and Pdadmac had lower cationic charge densities than the PA and PAC (the HCS being even lower), they gave higher zeta potentials to fibers, and lower turbidities, cationic demands and residual COD contents to the pulp liquid phases than the PA and PAC did. In all cases, the HCS showed even better effects than the Pdadmac. In addition, drainage speed was also much higher by the HCS treatments although paper formation was worsened. All the phenomena showed that the HCS can fix more dissolved and colloidal substances to cellulose fibers, indicating that the HCS functioned mainly with flocculation and even hydrogen bonding mechanisms. Data on optical properties further indicated that the HCS interacted preferentially with colloidal substances, since it fixed more 'dirty' microstickes to fibers which decreased more sheet brightness while increasing more sheet opacity (with both higher light absorption and scattering coefficients). Interestingly, the organic fixing agents did not decrease tensile, tearing, and folding strengths of paper sheets made from 100% recycled newsprint pulp, except when they were dosed in high amounts. On the contrary, the inorganic PAC had more serious negative effects on the strength properties, especially on folding endurance. The study suggested that proper use of the HCS can lead to better microstickies control effects than traditional agents and methods.

• Tuberculosis and Respiratory Diseases
• /
• v.76 no.6
• /
• pp.269-275
• /
• 2014

Background: The six-minute walk test has been widely used in people with chronic cardiopulmonary disorders as an outcome assessment with regards to therapeutic or prognostic determinants. This study was undertaken to determine the six-minute walk distance (6MWD) in a sample of healthy Koreans and to create a reference equation. We also compared the 6MWD of our cohort with previously published equations. Methods: Two hundred fifty-nine healthy subjects (95 males) aged 22-59 years performed two walking tests using a standardized protocol. 6MWD was defined as the greatest distance achieved from the two tests. The effect of anthropometrics on the 6MWD was also investigated. Results: The average 6MWD was $598.5{\pm}57.92m$, with significantly longer distances by males ($628.9{\pm}59.51m$) than females ($580.9{\pm}47.80m$) (p<0.001). Age, height, weight, and body mass index were significantly correlated with 6MWD in univariate analysis. Stepwise multiple regression showed height to be single independent predictor of 6MWD ($r^2$=0.205, p<0.001). The reference equations derived in Caucasian and North African populations tend to overestimate the distance walked by Korean subjects, while Asian equations underestimate it. Conclusion: The average 6MWD in these Korean populations was 600 m. The regression equation revealed that individual's height was the most significant predictor of distance, explaining 20.5% of the distance variance.