• Journal of Life Science
• /
• 제11권2호
• /
• pp.87-91
• /
• 2001

We conducted this study to analyze the effectiveness of a treatment called 12-week therapeutic recreation dance movement (TRDM) to elderly people in terms of health care and recovery. Forty two elderly people were participated in this study and divided into two groups with healthy (twelve) and unhealthy (thirty). After TRDM treatment, the muscular power was increased in both groups without statistical significance within and between groups. The flexibility, agility and balance were slightly increased in both groups. Although the elevation of muscular endurance was not significant between groups, it was statistically meaningful within groups. The results of body composition comparison did not reveal meaningful difference within and between groups. However, the amount of fat in serum and fat distribution percentages ware decreased in both groups. Both group appeared to be increased muscle mass. The level of body water was decreased in healthy group and increased in unhealthy group. Unhealthy group appeared to be decreased level of T-C, TG and LDL-C. In contrast, the unhealthy group revealed the increased level of HDL-C. These results demonstrate the effect of TRDM to elderly people. This effectiveness can be adapted for the protection and treatment of geriatics-related adult diseases such as diabetes, hypertension and hyperlipidemia.

• 한국세라믹학회지
• /
• 제34권10호
• /
• pp.1027-1036
• /
• 1997

The reology and several physical properties of cements are studied by varying the different mineral composition and particle size distribution(PSD) of cements with closed circuit ball mill for high workability, low heat of hydration, and high strength. In this study, we found that the workability of concretes is related to the viscosity of cement, and affects to strength. Here, this workability is affected by mineral composition (C3A) and the PSD. Especially, rosin-rammer index and 44${\mu}{\textrm}{m}$ residue in the PSD of cements are affected to water demand, casting property, slump loss, strength of cements. From the above results, the conditions of cement for high workability, low heat of hydration and high strength are to use low C3A clinker, 5-10% slag addition, and to grind cement below 0.7 rosin-rammer index, above 3.5-4.5% 44 ${\mu}{\textrm}{m}$ residue, 4000$\pm$100 $\textrm{cm}^2$/g blaine. Such cements are, therefore, supurior to super low heat cement and slag-blended cement in comparing the physical properties of strength, slump, slump-flow, adiabetic temperature, etc.

• 수산해양교육연구
• /
• 제26권3호
• /
• pp.525-534
• /
• 2014

This study has examined the effect of after-school physical activity on body composition and health related fitness of middle school students. The duration of after-school physical activity training program of this study is 12 weeks, the training time in 1 hours warming-up 10 minutes, the skill training 45 minutes and cool down did in 5 minutes. Exercise frequency is 5 time per week. Height basketball class, soccer class, subject class showed statistically meaningful increase between group variance showed statistically meaningful. Weight basketball class, soccer class, showed statistically meaningful decrease. Muscle mass basketball class showed statistically meaningful increase, soccer class showed statistically meaningful decrease. Cardiopulmonary basketball class, soccer class, showed statistically meaningful decrease. Explosive muscular strength basketball class, soccer class, showed statistically meaningful decrease. subject class showed statistically meaningful increase, between group variance showed statistically meaningful. Flexibility basketball class showed statistically meaningful increase, soccer class. Muscular strength basketball class, soccer class, subject class showed not statistically meaningful different.

• 식품보건융합연구
• /
• 제7권4호
• /
• pp.31-41
• /
• 2021

This study conducted 8 weeks of foam roller & mobility, core, and weight training for 9 middle school soccer players 5 times a week for 90 minutes to determine the effect on changes in body composition, thigh circumference, basic physical strength, and functional movement. To analyze the data according to the results of this study, SPSS 25.0 statistical program was used for analysis, and the mean (M) and standard deviation (SD) were calculated to present the descriptive statistics of all dependent variables. In addition, to analyze the difference between before and after exercise, it was verified using a paired t test. The statistical significance level (α) in all reasoning statistics was set to less than 5%. As a result, there were no significant changes in body composition and thigh circumference through 8 weeks of training. However, there were significant changes in agility and muscular endurance, and the total score for functional movement changes was significantly increased, and statistically significant changes were observed in three variables. Therefore, complex training is effective in changing the physical strength and functional movement of middle school soccer players, and further research will be required for a control group and various complex exercises.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2007년도 춘계학술대회 논문집
• /
• pp.222-226
• /
• 2007

Buildings form interior space when part of an external environment is limited by a physical surface. And, the interior space forms an appearance of building when space-defining elements, such as floor, wall, and roof. An appearance or a form of building has a lot of meanings depending on the physical and psychological conditions, as well as symbolism. Especially, the prevailing meaning of form in the modern age was, "Form follows function," was quite different from the meaning of form in the architectural era of Louis I. Kahn, who asserted "Form always supercedes function," when functional modernism was still existed even after some 50 years later. Existing studies on Louis I. Kahn usually analyzed his architectural terminology and philosophical concepts of Centrality, Light, Order, Form, and Design; or they were focused on an overall plane and the principle of composition. The purposes of this study are: (1) to investigate how the formal composition characteristics of building are expressed on skylights; and (2) to demonstrate that the formal composition characteristics of skylights plays an important role in constructing a whole structure of building in relation with other architectural elements.

• 국제물리치료학회지
• /
• 제3권1호
• /
• pp.383-390
• /
• 2012

The aim of this study was to investigate the correlation among bone mineral density(BMD), body composition and body circumference on 20's college women in Hwaseong. A total of 86 subjects were measured with BMD and body composition and body circumference. To evaluate the correlation between BMD and body composition, bone density and body weight, body mass index(BMI), lean body mass, muscle mass, fat mass and body fat mass were compared. The results of this study, weight was considered the strong correlation with BMD than the height and BMI seems to be greater significance rather than the lumbar spine and femur BMD. In addition, the relationship between body composition and BMD, lean body mass, muscle mass, body fat mass were the most relevant factors and BMD. The relationship between BMD and body circumference that have been difficult because of not enough previous studies but somewhat the study showed that association.

• 한국식품저장유통학회지
• /
• 제24권5호
• /
• pp.666-672
• /
• 2017

본 연구는 단삼식초 및 지구성 운동트레이닝이 고지방식 유도 비만 흰쥐의 신체구성 및 혈중 항목들의 농도 변화에 미치는 영향을 비교분석함으로서 대사성 증후군의 개선에 도움을 줄 수 있는 효과적인 방법을 모색하고자 실시되었다. 10주령 수컷 Wistar 흰쥐 40마리를 대상으로 8주간 고지방식 처치로 비만을 유도한 후 좌업군, 운동군, 단삼식초섭취군, 운동군+단삼식초섭취 복합처치군 등으로 무선, 배정하여 총 8주간 운동 및 식이처치를 실시하였으며, 체중 및 신체구성, 식이섭취량, 경구당 부하검사 및 혈중 콜레스테롤 농도 등을 측정하였다. 8주간의 단삼식초섭취는 지구성 운동과 병행할 경우 체중감소 및 인슐린 저항성의 개선효과를 확인할 수 있었다. 그러나 단삼식초섭취만 처치할 경우 오히려 체지방량을 증가시키고 제지방량은 감소시켰으며, 인슐린 저항성을 현저하게 개선시키지 않는 것으로 나타났다. 또한 지구성 운동과의 병행 시도의 경우에도 운동효과를 배제한 부가적인 효과가 나타나지 않았으며, 혈중 지질에 있어서는 운동의 효과마저 둔화시키는 것으로 나타났다. 따라서 단삼식초섭취에 따른 항고혈당, 항비만 효과는 확인될 수 없었으며, 추후 분자생물학적 분석에 의한 기전과 관련된 원인분석을 통해서 보다 명확한 결과를 제시할 수 있을 것으로 생각된다.

• 한국전기전자재료학회논문지
• /
• 제19권9호
• /
• pp.832-837
• /
• 2006

Antennas were fabricated by physical(adhesive) and chemical(deposition+plating) method on organic-inorganic composite material. And antennas were measured dielectric constant and gain. Dielectric constant of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness and number of conduction material composition. But antennas were fabricated by chemical method was reached to 90 % of dielectric material. Gain of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness. But they were unrelated with conduction material composition. The other side antennas were fabricated by chemical method excelled more 0.8 dBic than antennas were fabricated by physical method in gain of antenna. Finally, chemical method can expect excellent product process because it can produce smaller size, higher gain and elimination of many handworks.

• 자원환경지질
• /
• 제32권1호
• /
• pp.1-11
• /
• 1999

In the last decade, the supply of natural aggregates has been continuously increased due to the other types of aggregates. In general, aggregates constitute 70-80% of the total volume of concrete, so the quality of aggregates is main factor controlling physical characteristics of concrete. For this reason, physical properties of aggregate according to different rock types were studied. The majority of crushed aggregates is taken out of granite, gneiss, sandstone, andesite, basalt and so forth. The physical properties of these rock types were tested and most of them fell within the acceptable limit on the base of Korean standard regulation. The major lithology of the crushed aggregates is granite and gneiss, both of which are marked for more than 50% of total lithology thpes in Korea. A to the physical properties of granite, the high specific gravity coincides with low porosity, low absorption ratio, while the abrasion and soundness index show, in general, no specific trend. It has been assumed that slight differences of the physical properties of granite aggregates are related with those of the mineral composition, grain size, and so on. In comparison to granite, the physical properties of gneiss have little correlation one after another. This trend is related to different mineral composition, grain size and typical sheet fractures typically prevailing in the texture of gneiss. Spatial pattern of physical properties shows that high specific gravity of granite coincides only with low porosity and absorption ratio in all provinces except Cheolla province, and high specific gravity of gneiss coincides with low porosity and absorption ratio only in Cheolla and Gandwon provinces.

• Journal of the Korean Wood Science and Technology
• /
• 제20권2호
• /
• pp.9-22
• /
• 1992

The aim of this research was to investigate physical and mechanical properties of various composition panels, each fabricated with a ratio of fiber to particle of 2 to 10. Type A consisted of fiber-faces and particle-core in layered-mat system. Type B consisted of fiberboard-faces on particleboard-core. Type C consisted of fibers and particles in mixed-mat system. The results obtained from tests of bending strength, internal bond, screw holding strength and stability were as follows: 1. The bending strength and internal bonding of both the Type A panel and the Type B panel were higher than those of the Type C panel and three-layered particle board. 2. The mechanical properties of the Type C panel showed the lowest values of all composition methods. It seems that the different compression ratios of the particle and fiber interrupted the densification of the fibers when hot pressed. 3. The dimensional stability of layered-mat system panels consising of fiber-faces and particle-core was better the than control particleboard. 4. In composition methods of particle and fiber, layered-composition method was more resonable than mixed-composition. The Type B panel had the highest mechanical properties of all the composition types. 5. The Type A panel was considered the ideal composition method because of its resistance to delamination between the particle-layer and the fiber-layer and because of its lower adhesive content and more effective manufa cturing process.