• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.91-96
• /
• 2012

The physical properties of recycled polyester yarns according to recycling methods were investigated. Virgin polyester draw texturized yarn(DTY), material-recycled(MR) polyester DTY and chemical-recycled(CR) polyester DTY were prepared. Surface morphology, thermal property, micro-structure and mechanical property of recycled polyester yarns were estimated. SEM-EDS analysis showed that the CR PET yarn had better crimp and more stable structure than MR PET yarn. Tm of the MR PET yarn was higher than that of the CR PET yarn. The intensity of the crystallization peak of the CR PET yarn was a little higher than that of the MR PET yarn. Tensile strength of the MR PET yarn was slightly higher than that of the CR PET yarn. Breaking elongation of the CR PET yarn was slightly higher than that of the MR PET yarn.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.23-36
• /
• 2008

고분자-점토 나노복합체는 소량의 점토를 사용하여 큰 기계적 물성향상을 나타내 많은 관심을 끌고 있는 분야이다. 층상 구조를 갖고 있는 점토를 고분자 matrix에 분산하는 과정으로 요약할 수 있는 고분자-점토 나노복합체 제조는 친수성 점토 표면을 조절하는 기술, 점토의 물리적 성질을 이용하는 무기재료에 관한 지식, 고분자 합성, 고분자 유변학, 고분자 용액 거동, 기계적 물성이 복합적으로 작용하는 계이다. 이러한 복잡성을 설명하기 위해, 이 총설에서 점토 종류와 그 특성을 설명하였다. 또한 점토 특성과 고분자-점토 나노복합체 제조 방법의 연관성에 대해 설명하고, 제조된 복합체의 구조 분석과 방법에 대해 설명하였다. 그리고 복합체의 특징적인 물성을 분류한 후 그 물성과 복합체의 구조를 연관하여 살펴보았다. 마지막으로 최근의 연구 경향과 향후 연구 경향을 제시하였다.

• Composites Research
• /
• 제18권6호
• /
• pp.34-39
• /
• 2005

본 연구에서는 방탄재료로 활용 가능할 것으로 예상되는 여러 구조용 세라믹스의 물리기계적 물성과 방탄물성과의 상호연관성을 분석하였다. 물리기계적 물성을 측정한 후 30mm 고체추진포에서 10.7의 L/D비를 갖는 텅스텐 긴 관통자를 비행시켜 운동에너지(KE)탄에 대한 방탄물성을 측정하였으며, K215 자탄을 기폭시켜 성형작약(HEAT)탄에 대한 방탄물성을 측정하였다. 영률/밀도비, 경도/밀도비 및 꺽임강도/밀도비가 증가할수록 방탄물성이 대체적으로 증가하는 경향을 보였으며, 특히 HEL(Hugoniot Elastic Limit)/밀도비가 증가함에 따라 KE탄에 대한 방탄물성이 선형적으로 증가하는 현상을 나타내었다.

• 대한통합의학회지
• /
• 제7권2호
• /
• pp.11-17
• /
• 2019

Purpose : The purpose of this study was to determine the effects of specific frequency and application timing of microcurrent (MC) on the mechanical property of muscle caused by delayed onset muscle soreness (DOMS). Methods : The subjects were 32 healthy adults with 8 subjects randomly assigned to four groups (I; 40 Hz MC while inducing DOMS, II; 40 Hz MC immediately after inducing DOMS, III; 284 Hz MC while inducing DOMS, IV; 284 Hz MC immediately after inducing DOMS). DOMS is applied to the biceps brachii muscle while MC was applied at an intensity of $300{\mu}A$ for 10 minutes. The mechanical properties of muscle were measured before and immediately after DOMS. Results : In terms of muscle tone, there were significant differences in interaction effects between time and groups. Regarding muscle elasticity and stiffness, there were no significant differences in interaction effects between time and groups but there were only significant differences in main effects based on time. Conclusion : The results indicated that 40 Hz MC had an effect on reducing muscle tone regardless of application timing. However, both 40 Hz and 284 Hz MC did not trigger changes in muscle elasticity and stiffness regardless of application timing.

• 한국의류산업학회지
• /
• 제16권2호
• /
• pp.312-318
• /
• 2014

This study examined the correlation between a handle evaluation of cosmetic puff textile and a sensory evaluation. The KES-F system was used to analyze the main mechanical factors for the handle evaluation and a statistical method was used for the sensory evaluation. The results revealed different mechanical properties and handle values of the tested cosmetic puff textiles. A material type and structure of the cosmetic textile affected the handle property of the material which is the most important factor for a cosmetic purpose. Particularly, the physical properties of textile material are likely to be important factors for the sensory property of cosmetic material. In addition, the sensory evaluation also revealed different sensory characteristics of the cosmetic efficiency according to the cosmetic puff textile. No close relationship was observed between the mechanical properties and sensory evaluation on the cosmetic puff textiles. The sensory evaluation of a cosmetic efficiency is not only decided by the physical and mechanical characteristics of the cosmetic textile material. Overall, when using textiles used for the cosmetic purposes, it is important to consider not only the proper mechanical properties of the textiles but also the use and sensory satisfaction. Development and selection of the cosmetic textiles should be focused on both the material function and consumer satisfaction.

• 한국의류학회지
• /
• 제33권1호
• /
• pp.149-159
• /
• 2009

The purposes of this study are to evaluate physical performance of metallic Jacquard fabrics, and to contribute to the research and development of the women's suit made of the metallic Jacquard fabrics. First, eight fabrics were woven with two kinds of warp yarns(nylon and rayon) and weft yarn blended with various contents(0, 7, 14, 21%) of metallic yarn. Second, the mechanical properties were measured by using the KES-FB system, and physical properties such as tensile strength, tearing strength, abrasion resistance, drape, pilling, snagging, degree of crease resistance, flexural stiffness, specular gloss, folding endurance and electrostatic propensity were measured. The results were as follows. As the metal fiber content increased, bending, shear, thickness and weight increased, which imply low recovery of wrinkles. It means that metallic Jacquard fabrics enable to use as a memory fabric. 7% metallic Jacquard fabric showed a low value at total hand value, but there was little change. As the metal fiber content increased, tensile strength, tearing strength, drape coefficient, specular gloss and flexural stiffness increased, however the degree of crease resistance, electrostatic propensity and folding endurance decreased. The metallic Jacquard fabrics were excellent in snagging, abrasion resistance and pilling.

• 한국운동역학회지
• /
• 제22권2호
• /
• pp.237-242
• /
• 2012

The purpose of this study was (a) to develop carbon nanotube-based shock absorbers for reducing potentially harmful impact forces and excessive foot pronation, and (b) to briefly determine how the effects of carbon nanotube-based shock absorbers on biomechanical variance during drop landing. A university student(age: 24.0 yrs, height: 176.2 cm, weight: 679.5 N) who has no musculoskeletal disorder was recruited as the subject. Hardness, specific gravity, tensile strength, elongation, 100% modulus, tear strength, split tear strength, compression set, resilience, vertical GRF, and loading rate were determined for each material. For each dependent variable, a descriptive statistics was used for different conditions. The property test results showed that tensile strength, tear strength, split tear strength, compression set, and resilience in carbon nanotube-based shock absorbers were greater than general Ethylene Vinyl Acetate(EVA). These indicated that resistance against variable strength in developed carbon nanotube-based shock absorbers were greater than general EVA. In vertical GRF of CNTC was less than those of EVA during drop landing and loading rate of CNTC was greater than EVA. It seems that the use of CNT can be a effective way of reducing and controlling shock from impact.

• 한국의류학회지
• /
• 제33권10호
• /
• pp.1655-1664
• /
• 2009

Chitosan is an environment-friendly and natural cationic polymer that can be used as a hair cosmetic additive. Healthy hair and damaged hair samples were experimented on according to treatment conditions using a water-soluble chitosan. Chitosan treated hair samples were studied on the physical and mechanical property changes. It is most effective when the water-soluble chitosan treatment was adjusted to the Neutral (pH6.8) or Acid (pH4.5). When the water soluble chitosan was treated at pH4.5, the tensile strength, tensile elongation, and elasticity of decolorized hair all increased. The virgin and damaged hair both changed into elastic and soft hair. The effect of chitosan treatment is more noticeable in the healthy hair than in the damaged hair.

• Carbon letters
• /
• 제10권4호
• /
• pp.320-324
• /
• 2009

We investigated the effect of diameter and content of carbon nanotubes (CNTs) on the physical properties of styrenebutadiene rubber (SBR)/CNTs nanocomposites. CNTs-reinforced SBR nanocomposites were prepared by the melt mixing process. CNTs with different diameters were synthesized by the chemical vapor deposition method (CVD). In this work, the mechanical property and other physical properties of SBR/CNTS nanocomposites were discussed as a function of the content and diameter of CNTs.

• 한국농공학회지
• /
• 제41권6호
• /
• pp.97-104
• /
• 1999

An experimental investigation was carried out to study the feasibility of using the stabiliozed sludge, as a backfill and cutoff-water materials for embankment structures. For stabilizing of sludge, hydrated lime and quick lime were used as additive, and a series of tests were performed on the sludge and the stabilized sludge to examine their physical and mechanical properties , compaction, compressive strength, hydraulic conuctivity and consolidation characteristics. From the test results, physical and mechanical properties of the stabilized sludge were improved as compared with the sludge. Especially from the viewpoint of physcial property, consolidation or settlement and cutoff-water, quick lime is more effective than the hydrated lime as a stabilization addtive. But, viewpoint of compaction and shear strength, hydrated lime is more effective than the quick lime as a atabilization additive. As a result of this study, it was found that the stabilized sludge can be developed the backfill and cutoff-water materials, improved the stabilizing method of sludge.