• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.666-673
• /
• 2022

The optimization of a transmission type bremsstrahlung conversion target was carried out with Monte Carlo code FLUKA for intense pulsed electron beams with electron energy of several hundred keV for maximum photon fluence. The photon emission intensity from electrons with energy ranging from 300 keV to 1 MeV on tungsten, tantalum and molybdenum targets was calculated with varied target thicknesses. The research revealed that higher target material element number and electron energy leads to increased photon fluence. For a certain target material, the target thickness with maximum photon emission fluence exhibits a linear relationship with the electron energy. With certain electron energy and target material, the thickness of the target plays a dominant role in increasing the transmission photon intensity, with small target thickness the photon flux is largely restricted by low energy loss of electrons for photon generation while thick targets may impose extra absorption for the generated photons. The spatial distribution of bremsstrahlung photon density was analyzed and the optimal target thicknesses for maximum bremsstrahlung photon fluence were derived versus electron energy on three target materials for a quick determination of optimal target design.

• Journal of Astronomy and Space Sciences
• /
• 제40권4호
• /
• pp.259-266
• /
• 2023

The Standard Model (SM) does not provide an information for 26% of dark matter of the universe. In the dark sector, dark matter is supposed to be linked with the hypothetical particles called dark photons that have similar role to photons in electromagnetic interaction in the SM. Besides astronomical observation, there are studies to find dark matter candidates using accelerators. In this paper, we searched for dark photons using future electron-positron colliders, including Circular Electron Positron Collider (CEPC)/CEPC, Future Circular Collider (FCC-ee)/Innovative Detector for Electron-positron Accelerator (IDEA), and International Linear Collider (ILC)/International Large Detector (ILD). Using the parameterized response of the detector simulation of Delphes, we studied the sensitivity of a double dark photon mode at each accelerator/detector. The signal mode is double dark photon decay channel, e⁺e^- → A'A', where A' (dark photon with spin 1) decaying into a muon pair. We used MadGraph5 to generate Monte Carlo (MC) events by means of a Simplified Model. We found the dark photon mass at which the cross-sections were the highest for each accelerator to obtain the maximum number of events. In this paper we show the expected number of dark photon signal events and the detector efficiency of each accelerator. The results of this study can facilitate in the dark photon search by future electron-positron accelerators.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.44-44
• /
• 2004

• Journal of Astronomy and Space Sciences
• /
• 제38권1호
• /
• pp.55-63
• /
• 2021

The universe is well known to be consists of dark energy, dark matter and the standard model (SM) particles. The dark matter dominates the density of matter in the universe. The dark matter is thought to be linked with dark photon which are hypothetical hidden sector particles similar to photons in electromagnetism but potentially proposed as force carriers. Due to the extremely small cross-section of dark matter, a large amount of data is needed to be processed. Therefore, we need to optimize the central processing unit (CPU) time. In this work, using MadGraph5 as a simulation tool kit, we examined the CPU time, and cross-section of dark matter at the electron-positron collider considering three parameters including the center of mass energy, dark photon mass, and coupling constant. The signal process pertained to a dark photon, which couples only to heavy leptons. We only dealt with the case of dark photon decaying into two muons. We used the simplified model which covers dark matter particles and dark photon particles as well as the SM particles. To compare the CPU time of simulation, one or more cores of the KISTI-5 supercomputer of Nurion Knights Landing and Skylake and a local Linux machine were used. Our results can help optimize high-energy physics software through high-performance computing and enable the users to incorporate parallel processing.

• Transactions on Electrical and Electronic Materials
• /
• 제11권2호
• /
• pp.49-53
• /
• 2010

Microstructural origins of leakage current and physical degradation during operation in product-quality AlGaN/GaN high electron mobility transistor (HEMT) devices were investigated using photon emission microscopy (PEM) and transmission electron microscopy (TEM). AlGaN/GaN HEMTs were fabricated with metal organic chemical vapor deposition on semi-insulating SiC substrates. Photon emission irregularity, which is indicative of gate leakage current, was measured by PEM. Site specific TEM analysis assisted by a focused ion beam revealed the presence of threading dislocations in the channel below the gate at the position showing strong photon emissions. Observation of electrically degraded devices after life tests revealed crack/pit shaped defects next to the drain in the top AlGaN layer. The morphology of the defects was three-dimensionally investigated via electron tomography.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.229-237
• /
• 2023

The mechanics underlying photon and electron interactions was validated using our developed Brachytherapy computer code for high Dose Rate (HDR). By comparing the photon cross-section utilizing multiple physics libraries in the developed code, the results were benchmarked against experimental and theoretical findings. Klein-Nishina and experimental cross-section results were in good agreement with the Livermore library results. For two therapeutically relevant materials, the first scattered electron range was measured within 1 mm and 2 mm, which has significant implications for the interpretation of the kernel dose spikes observed in previous research.

• Nuclear Engineering and Technology
• /
• 제46권2호
• /
• pp.263-272
• /
• 2014

Scattering source calculations using conventional spherical harmonic expansion may require lots of computation time to treat full-coupled three-dimensional photon-electron transport in a highly anisotropic scattering medium where their scattering cross sections should be expanded with very high order (e.g., $P_7$ or higher) Legendre expansions. In this paper, we introduce a modified scattering kernel approach to avoid the unnecessarily repeated calculations involved with the scattering source calculation, and used it with parallel computing to effectively reduce the computation time. Its computational efficiency was tested for three-dimensional full-coupled photon-electron transport problems using our computer program which solves the multi-group discrete ordinates transport equation by using the discontinuous finite element method with unstructured tetrahedral meshes for complicated geometrical problems. The numerical tests show that we can improve speed up to 17~42 times for the elapsed time per iteration using the modified scattering kernel, not only in the single CPU calculation but also in the parallel computing with several CPUs.

• 한국방사선학회논문지
• /
• 제14권3호
• /
• pp.193-201
• /
• 2020

본 연구 목적은 선형가속기를 통해 입사된 전자가 표적(target)을 구성하는 물질과 두께에 따른 광자 특성을 평가하는 것이다. 전산모사 설계는 2 mm 두께의 텅스텐 단일물질과 1.8 mm 와 2.3 mm 두께의 텅스텐과 구리 복합물질로 구성된 선형가속기 표적(Target)이다. 연구 방법은 첫째, 표적 내 일차 입자의 거동은 전자플루언스와 전자 에너지 축적으로 평가하였다. 둘째, 표적 내에서 발생하는 광자는 광자 플루언스로 평가하였다. 셋째, 표적으로부터 1 m 거리에서의 광자 각-에너지 분포는 광자 플루언스로 평가하였다. 그 결과 첫째, 단일물질과 복합물질 표적에서의 전자 플루언스와 에너지 축적을 통해 일차 입자인 전자가 표적 밖으로 방출되지 않았으며, 표적 두께에 따라 전자가 음의 선형적으로 감쇄하였다. 둘째, 복합물질 표적이 단일물질 표적보다 광자 생성이 더 높은 것으로 나타났다. 이는 물질 구성 성분과 두께가 광자 생성에 영향을 준다는 사실을 확인하였다. 셋째, 차폐 해석에 필요한 각 분포에 따른 광자 플루언스를 계산하였다. 이러한 결과는 선형가속기 표적을 구성하는 물질과 두께에 따라 광자 생성률이 차이 나는 것을 확인할 수 있었다. 따라서, 본 연구는 국가에서 도입 중인 컨테이너 보안 검색용 선형가속기 사용시설의 설계 및 운영 시 필요한 자료이며, 방사선 방호에 기초 자료로 활용될 수 있을 것으로 생각된다.

• 한국진공학회지
• /
• 제10권2호
• /
• pp.257-261
• /
• 2001

InGaAs/GaAs 초격자 구조들 사이에 InAs/GaAs 양자점을 MBE로 성장하고 광특성을 측정한 결과 매우 균일한 양자점을 얻을 수 있었다. Self-consistent한 이론 계산으로부터 얻은 p-i-n 구조의 최적 조건으로 단일광자구조를 성장하고 단일광자소자를 e-beam lithography를 이용하여 제작하였다. 전기적 특성인 I-V곡선에서 나타난 전기 이력현상으로부터 단일 전자와 단일 정공이 다른 전압에서 투과하여 단일 전자-정공 재결합 현상이 나타나고 있음을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.172-172
• /
• 2000

진공상태에서 diamond stylus로 MgO 표면을 마모시킬 때 발생되는 photon, electron과 마찰력을 시간의 함수로 동시에 측정하였다. 전자 방출(EE)은 Channeltron electron multiplier로 , 광자 에너지는 Photomultiplier tube를 사용하여 측정하였는데 180~600nm 영역의 photon을 검출하였다. 광자 방출(PhE,) 실험은 공기중에서도 할 수 있으나 전자방출은 1$\times$10-4pa 이하의 진공에서 실험하여 얻었다. 본 실험을 통하여 결정과 diamond stylus 사이에서 일어나는 마모 현상은 millisecond로 관찰하여 표면 변화에 대한 상관관계를 조사하였다. 열처리 한것과 열처리 하지 않은 시료를 비교한 결과 3개의 signal(마찰력, PhE, EE)을 시간에 따라 분석하면 stick-slip-like 현상을 볼 수 있었다. 이것으로 보아 stick은 변형에 의해 생기고 ms 후에 벽개 현상이 발생됨을 볼 수 있다. 방출과 마찰력은 표면조건, load, stylus velocity에 따라 변하였다. luminescence는 주로 변형에 의해 생겼으며, 전자 방출은 벽개(fracture)에 의해 발생됨을 알 수 있었다. 시료의 처리과정과 load 속도에 따른 Photon, electron의 방출은 시료의 표면 상태에 따라 좌우되었다. 마찰력, PhE, EE의 시간에 따른 분석에서 PhE는 변형 과정에 민감하며, EE는 stylus velocity에 의존하였다. 이러한 방출 현상은 세라믹의 급격한 벽개 과정을 이해하는데 많은 도움을 주었다.