• 제목/요약/키워드: Photoluminescence properties

검색결과 896건 처리시간 0.027초

ZnO 성장을 위한 Atomic Layer Deposition법에서 공정온도가 박막의 구조적 및 광학적 특성에 미치는 영향 (Effects of Substrate Temperature on the Microstructure and Photoluminescence Properties of ZnO Thin Films by Atomic Layer Deposition)

  • 임종민;이종무
    • 한국재료학회지
    • /
    • 제15권11호
    • /
    • pp.741-744
    • /
    • 2005
  • Atomic layer deposition (ALD) is a very promising deposition technique for ZnO thin films. However, there have been very few reports on ZnO grown by ALD. Effects of substrate temperature in both ALD and post annealing on the microstructure and PL properties of ZnO thin films were investigated using X-ray diffraction, photoluminescence, and scanning electron microscopy. The temperature window of ALD is found to be between $130-180^{\circ}C$. The growth rate of ZnO thin film increases as the substrate temperature increases in the temperature range except the temperature window. The crystal quality depends most strongly on the substrate temperature among all the growth parameters of ALD. The crystallinity of the film is improved by increasing the growth thine per ALD cycle or doing post-annealing treatment. The grain size of the film tends to increase and the grain shape tends to change from a worm-like longish shape to a round one as the annealing temperature increases from $600^{\circ}C\;to\;1,000^{\circ}C$.

InGaAsP/InP이종접합구조의 격자부정합이 Photoluinescence효율에 미치는 영향 (Effects of Lattice Mismatch on Photoluminescence Efficiency of InGaAsP/InP Heterostructures)

  • 이종원
    • 한국재료학회지
    • /
    • 제4권5호
    • /
    • pp.516-523
    • /
    • 1994
  • 이논문에서는 metal organic chemical vapor deposition(MOCVD)에 의해서 성장된 InGaAsP/InP이종접합구조의 격자부정합이 Photoluminescence(PL)효율에 미치는 영향을 연구하였다. 격자부정합은 (400)과 {511} x-ray reflection을 통해 측정하였고, 부정합 전위의 유무는 x-ray to-pography와 PL imaging을 통해 확인했다. PL강도 측정결과, 상대적으로 높은 PL강도는 탄성적으로 스트레인을 받은 시료에, 낮은 PL강도는 전위로 인해 비탄성적으로 변형된 시료에서 얻어졌다. 성장온도에서 격자정합된 시료의 PL효율이 실온에서 가장 높은 것을 알 수 있었다. PL강도와 X-ray반치폭과 관계에서, 시료의 광전자 특성이 구조적 특성과 밀접하게 연관됨을 알 수 있었다.

  • PDF

Photoluminescence properties of Mn4+-activated Li2ZnSn2O6 red phosphors

  • Choi, Byoung Su;Lee, Dong Hwa;Ryu, Jeong Ho;Cho, Hyun
    • Journal of Ceramic Processing Research
    • /
    • 제20권1호
    • /
    • pp.80-83
    • /
    • 2019
  • The Mn4+-activated Li2ZnSn2O6 (LZSO:Mn4+) red phosphors were synthesized by the solid-state reaction at temperatures of 1100-1400 ℃ in air. The synthesized LZSO:Mn4+ phosphors were confirmed to have a single hexagonal LZSO phase without the presence of any secondary phase formed by the Mn4+ addition. With near UV and blue excitation, the LZSO:Mn4+ phosphors exhibited a double band deep-red emission peaked at ~658 nm and ~673 nm due to the 2E → 4A2 transition of Mn4+ ion. PL emission intensity showed a strong dependence on the Mn4+ doping concentration and the 0.3 mol% Mn4+-doped LZSO phosphor produced the strongest PL emission intensity. Photoluminescence emission intensity was also found to be dependent on the calcination temperature and the optimal calcination temperature for the LZSO:Mn4+ phosphors was determined to be 1200 ℃. Dynamic light scattering (DLS) and field-effect scanning electron microscopy (FE-SEM) analysis revealed that the 0.3 mol% Mn4+-doped LZSO phosphor particles have an irregularly round shape and an average particle size of ~1.46 ㎛.

백색 LED용 ZnS:Mn,Cu 황색형광체의 발광특성 (Luminescent Characteristics of ZnS:Mn,Cu Yellow Phosphors for White Light Emitting Diodes)

  • 유일;이지영
    • 한국전기전자재료학회논문지
    • /
    • 제23권8호
    • /
    • pp.627-631
    • /
    • 2010
  • ZnS:Mn yellow phosphors doped with Cu for white light emitting diodes were synthesized by solid state reaction method. The optical properties and structures of ZnS:Mn,Cu phosphors were investigated by x-ray diffraction, photoluminescence, and scanning electro microscopy. Photoluminescence excitation spectra originated from $Mn^{2+}$ were ranged from 450 nm to 500 nm. The yellow emission at around 580 nm was associated with $^4T_1{\rightarrow}^6A_1$ transition of $Mn^{2+}$ ions in ZnS:Mn,Cu phosphors. The highest photoluminescence intensity of the phosphors under 405 nm excitation was obtained at Cu concentration of 0.02 mol%. The enhanced photoluminescent intensity in the ZnS:Mn,Cu phosphors was interpreted by energy transfer from Cu to Mn.

유기 은(Ag) 화합물의 소결 온도가 MEH-PPV의 PL특성에 미치는 영향 (The Effects of Sintering Temperature of Organic Ag Complex on the Photoluminescence Characteristics of MEH-PPV)

  • 강민기;문대규
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.328-329
    • /
    • 2009
  • This paper presents the effect of organic Ag complex sintering temperature on the MEH-PPV photoluminescence (PL) properties. MEH-PPV and organic Ag complex was coated on the glass substrate by spin coating method. The coated Ag complex was sintered in an air atmosphere. The sintering temperature was varied from 100 to $200^{\circ}C$ and sintering time was 5 min. The Ag film sintered at temperature higher than $120^{\circ}C$ shows very low sheet resistance less than $0.5\;{\Omega}{/\square}$. The coated MEH-PPV measure photoluminescence (PL) intensity at 580 nm. The PL peak was shifted to the higher wavelength with increasing the sintering temperature.

  • PDF

Synthesis and Characterization of One-Dimensional GaN Nanostructures Prepared via Halide Vapor-Phase Epitaxy

  • Byeun, Yun-Ki;Choi, Do-Mun;Han, Kyong-Sop;Choi, Sung-Churl
    • 한국세라믹학회지
    • /
    • 제44권3호
    • /
    • pp.142-146
    • /
    • 2007
  • High-quality one-dimensional GaN nanorods and nanowires were synthesized on Ni-coated c-plan sapphire substrate using halide vapor-phase epitaxy (HVPE). Their structure and optical properties were investigated by X-ray diffraction, scanning and transmission electron microscopy, and photoluminescence techniques. Full substrate coverage of densely packed, uniform, straight and aligned one-dimensional GaN nanowires with a diameter of 80nm were grown at $700{\sim}900^{\circ}C$. The X-ray diffraction patterns, transmission electron microscopic image, and selective area electron diffraction patterns indicate that the one-dimensional GaN nanostructures are a pure single crystalline and preferentially oriented in the [001] direction. We observed high optical quality of GaN nanowires by photoluminescence analysis.

$TlGaS_2:Er^{3+}$ 단결정의 Photoluminescence 특성 연구 (Photoluminescence Properties of $TlGaS_2:Er^{3+}$ Single Crystal)

  • 송호준;윤상현;김화택
    • 한국진공학회지
    • /
    • 제2권3호
    • /
    • pp.299-303
    • /
    • 1993
  • Erbium metal을 불순물로서 2mol% 첨가한 TlGaS2:Er3+ 단결정을 수평전기로에서 합성한 ingot를 사용하여 수직 Bridgman 방법으로 성장시켰다. 성장된 결정은 층상으로 이루어진 monoclinic 구조였으며, 10K에서 간접전이형 및 직접전이형 energy band gap은 각각 2.55eV, 2.57eV이었고, Er3+ 이온에 의한 두 개의 불순물 광흡수 peak가 524.9nm와 656.4nm에서 관측되었다. Themally stimulated current(TSC)를 측정하여 0.21eV와 0.38eV의 donor 준위와 0.71eV의 accptor 준위를 구하였다. 10K에서 측정된 photoluminescence(PL) spectrum에서는 632nm와 759nm에서 D-A pair에 의한 broad한 peak와 552, 559, 666, 813, 816, 827nm에서 Er3+ 이온에 의한 sharp한 peak들이 나타났다.

  • PDF

$CuGaSe_2$ 단결정의 Photoluminescence 특성 (Photoluminescence Properties of $CuGaSe_2$ Single Crystal)

  • 진문석;김화택
    • 한국진공학회지
    • /
    • 제2권3호
    • /
    • pp.294-298
    • /
    • 1993
  • CuGaSe2 단결정을 고순도(99.9999%)의 Cu, Se 원소를 화학조성비로 칭량한 후 Se을 3mole% 과잉으로 첨가하여 합성된 ingot를 사용하여 iodine(99.9999%)을 수송매체로 한 화학수송법으로 성장시켰다. 성장된 단결정은 검정색을 띠고 있었으며, 10K에서 optical energy gap이 1.755eV로 주어졌다. Ar-ion laser로 여기시켜 측정한 photoluminescence(PL) 스펙트럼으로부터 1.667eV, 1.085eV, 1.025eV에 위치한 세 개의 PL peak를 얻었다. Thermally stimulated current(TSC) 측정에서 0.660eV, 0.720eV의 deep donor level을 관측하였으며, PL peak intensity의 thermal quenching으로 구한 activation energy는 0.010eV이었다. CuGaSe2 단결정에서 PL mechanism은 edge emission 및 donor-acceptor pair recombination임을 규명했다.

  • PDF

Photoluminescence properties of N-doped and nominally undoped p-type ZnO thin films

  • Jin, Hu-Jie;Jeong, Yun-Hwan;Park, Choon-Bae
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
    • /
    • pp.65-66
    • /
    • 2008
  • The realization and origin of p-type ZnO are main issue for photoelectronic devices based on ZnO material. N-doped and nominally undoped p-type ZnO films were achieved on silicon (100) and homo-buffer layers by RF magnetron sputtering and post in-situ annealing. The undoped film shows high hole mobility of 1201 $cm^2V^{-1}s^{-1}$ and low resistivity of $0.0454\Omega{\cdot}cm$ with hole concentration of $1.145\times10^{17}cm^{-3}$. The photoluminescence(PL) spectra show the emissions related to FE, DAP and defects of $V_{Zn}$, $V_O$, $Zn_O$, $O_i$ and $O_{Zn}$.

  • PDF

Preparation and Photoluminescence Properties of $Ba_{1-x}M_xGa_2S_4:Eu^{2+}$ (M = Ca, Sr) Phosphor

  • Yoo, Hyoung-Sun;Kim, Sung-Wook;Han, Ji-Yeon;Park, Bong-Je;Jeon, Duk-Young
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.561-564
    • /
    • 2008
  • $Ba_{1-x}M_xGa_2S_4:Eu^{2+}$ (M = Ca, Sr) phosphor was prepared for white light emitting diodes application. Photoluminescence (PL) emission and excitation bands were red-shifted with increase of Ca and Sr content due to the crystal field effect. Moreover, the PL intensity under 450 nm was increased by substitution of Ca and Sr.

  • PDF