• 한국전기전자재료학회논문지
• /
• 제13권1호
• /
• pp.75-79
• /
• 2000

In this study, we investigated the pretilt angle generation and liquid crystal (LC) alignment by ultravi-olet (UV) light irradiation during imidization of polymide. The generated pretilt angle of nematic (N) LC by using the in-situ photo-alignment method was smaller than that of the conventional UV photo-alignment method. Also, generated pretilt angle of NLC tends to increase by annealing. In case of using the polymer(AL-3046), we found that the in-situ Uv photo-alignment method has higher thermal stability of LC alignment, but it has a disadvantage to control pretilt angle.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.770-775
• /
• 2000

A new photo-polymer material of the copoly (PM4Ch-ChMA), copoly (poly (4-methacryloyloxy)chalcone-cholesteryl methacrylate) for homeotropic alignment was synthesized and the electro-optical (EO) performance for the photo-aligned vertical-aligned (VA)-LC display (LCD) was studied. Good thermal stabilities of synthesized copolymer were obtained by TGA(Thermogravimetric Analysis) measurement. Good voltage-transmittance (V-T) and response time characteristics for the photo-aligned VA-LCD with polarized UV exposure in oblique direction($\theta$$_{i}$=30$^{\circ}$) on a copolymer-1 (2%) surfaces for 1 min were observed. but, light leakage in the off-state was observed. Therefore, we achieved excellent V-T and response time characteristics for the photo-aligned VA-LCD with UV exposure on a copolymer-3 (30%) surfaces for 3 min.n.

• 한국진공학회지
• /
• 제22권4호
• /
• pp.193-197
• /
• 2013

본 연구에서는 sol-gel법을 이용해 제작된 $VO_2$ 박막의 광전변환 특성을 연구하기 위해 광 조사 유무에 의해 생성되는 전류를 bias voltage에 따라 온도별로 측정하였다. 그 결과, 광 조사 유무에 따라 박막에서 생성되는 전류가 변화되는 것을 알 수 있었으며, bias voltage가 증가할수록 전류가 일정하게 늘어나는 것을 알 수 있었다. 특히, 광에 의해 생성되는 전류는 $VO_2$에서의 MIT 온도보다 낮은 $50^{\circ}C$에서 최대였다. 이러한 결과는 $VO_2$에서 photo-voltaic 효과가 발생함을 의미하며, 따라서 $VO_2$ 박막을 광전변환 소자로 응용할 수 있을 것으로 기대된다.

• 해양환경안전학회지
• /
• 제18권3호
• /
• pp.287-293
• /
• 2012

본 연구는 수산 폐기물인 굴패각을 공조시스템의 수분 흡착제로 사용하기 위한 가능성을 실험을 통해 살펴본 기초적인 연구이다. 연구의 주된 목적은 굴패각의 제습성능과 열전소자의 냉각효과를 파악하는 것이며 본 연구를 통해 굴패각은 공조시스템 내에서 사용가능한 수분 흡착제로서의 성능을 충분히 가지고 있으며, 또한 냉각효과를 통해 흡착성능을 크게 향상시킬 수 있다는 것을 알았다. 본 시스템은 신재생에너지인 태양광을 이용하기 때문에 시스템의 구동에 필요한 다른 전원은 필요 없어 환경적으로도 매우 바람직한 연구이다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권4호
• /
• pp.472-477
• /
• 1995

The degree of the photodoping process in Ag(100[.angs.])/a-Se$_{75}$Ge$_{25}$(1500[.angs.]) films has measured as a function of the photon energy between 1.5[eV] and 2.9[eV] with the exposing time. The "window" characteristics of Ag occur at 3400[.angs.] (3.65[eV]) and Ag is almost transparent in this region. It is shown that transmittance is almost constant (40-50%) for the wavelength ranges of our experiment. It is found that the energy gap of a unexposed a-Se$_{75}$Ge$_{25}$ film is 1.81[eV]. Ag photodoping process results in the photodarkening effect which the absorption edge shifts to the long wavelength. Especially, very large band shift (-0.3[eV]) is obtained by exposing He-Ne laser(6328[.angs.]).. We have obtained "the U-type property" for Ar He-Ne and semiconductor laser. It is associated with the variation of energy gap(E$_{g}$) with photo-dose and substantially is explained by DWP model.l.gap(E$_{g}$) with photo-dose and substantially is explained by DWP model.

• 한국해양바이오학회지
• /
• 제10권2호
• /
• pp.83-90
• /
• 2018

Ultraviolet (UV) radiation causes inflammation and matrix metalloproteinase (MMP) over-expression and extra cellular matrix depletion, leading to skin photo-aging such as wrinkle formation, dryness, and sagging. In this study, we demonstrated that pretreatment with the hexane extract of microalgae protects UVB mediated cell damages. The results of clinical study showed that Microalgal Oil treated group reduced wrinkle and improve elasticity. All these results suggest Microalgal Oil may be useful as new photo-aging cosmetics for protection against UV induced activity.

• 공업화학
• /
• 제16권1호
• /
• pp.117-122
• /
• 2005

가시광선 중합형의 치아수복용 고분자 복합체(polymeric dental restorative composites, PDRC)에 있어서 여러 종류의 3급 아민계 광증감제가 PDRC의 치과적 물성에 미치는 영향을 기계적 물성과 심미적 특성을 분석한 후 고찰하였다. PDRC 제조에 사용한 barium silicate 필러는 아크릴계 resin matrix와의 혼화성 증가를 위해 표면을 소수성으로 처리하여 사용하였다. 광중합에 필요한 광개시제로는 resin matrix를 기준으로 camphorquinone을 0.5 wt%로 하여 사용하였다. 그 결과, 제조된 PDRC의 기계적 물성과 심미적 특성은 사용한 광증감제의 함량보다는 화학적 구조에의 의존성이 더 큼을 알 수 있었다.

• 한국해양공학회지
• /
• 제17권3호
• /
• pp.52-56
• /
• 2003

This study investigates the photoelectrochemical behavior of STS304 steel with TiO2 thin films coating, applied by sol-gel mehod, for the purpose of cathodic photoprotection of the steel corrosion. One time TiO2-coated STS304 steel, adapted with two kinds of TiO2 sol solution, has the most dominant photopotential abilities, which was -200mV vs. SCE and -500mV vs. SCE under illumination with 40 W fluorescent lamp, respectively. That had yielded more negative values than the corrosion potential of the bare metal(-130mv vs.SCE). The bleaching of TCE was confirmed on TiO2-coated STS304 steel under UV-illumination with 20W Black-light. This Study concluded that Ti02-coated STS304 exhibited both a cathodic photoprotection effect against corrosion and a photocatalytic self-cleaning effect.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.307-311
• /
• 2002

This study was investigated the photoelectrochemical behavior of STS304 steel with $TiO_2$ thin films coating, applied by sol-gel method, for the purpose of cathodic photoprotection of the steel corrosion. One time $TiO_2$-coated STS304 steel adopted two kinds of $TiO_2$ sol solution has the most dominant photopotential abilities, which was -200mV vs. SCE and -500mV vs. SCE under illumination with 40W fluorescent lamp, respectively. That was more negative than the corrosion potential of the bare metal(-150 mV). The bleaching of TCE was confirmed on $TiO_2$-coated STS304 under UV-illumination with 20 W Black-light. This Study was concluded that $TiO_2$-coated STS304 exhibited both a cathodic photoprotection effect against corrosion and photocatalytic self-cleaning effect.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.235-235
• /
• 2012

Reduced graphene oxide (rGO) 물질을 사용하여 전계효과 트랜지스터를 제작하였고 이의 광전기적 특성을 펄스 레이저와 진공 저온 측정을 통하여 분석하였다. 이를 통하여 rGO 소자의 광소자로써의 이용 가능성에 대하여 고찰하였다.