• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.4
• /
• pp.223-226
• /
• 2013

In this study, we investigated the electro-optical(EO) characteristic of fringe-field switching(FFS) mode cell by the two kinds of ultraviolet(UV) alignment method on the organic thin film(polyimide: PI). The suitable organic layersfor FFS cell and the aligning capabilities of nematic liquid crystal(NLC) using the in-situ photoalignment method were studied Disclination is observed after conventional photoalignment method for 1h, and in-situ photoalignment method for 1h. Monodomain alignment of the NLC can be observed via in-situ photoalignment method for 2h and 3h. It is considered that NLC alignment is due to photo-depolymerization of the polymer with oblique non-polarized UV irradiation on PI surface. An unstable V-T curve of UV-aligned FFS-LCD with conventional photoalignment method can be achieved. However, a stable V-T curve of UV-aligned FFS-LCD with in-situ photoalignment method(1h), and V-T curve of UV-aligned FFS-LCD with in-situphotoalignment method was much stable comparing with that of other UV-aligned FFS-LCD's. As a result, more stable EO performanceof UV-aligned FFS-LCD with in-situphotoalignment method for 3h is obtained than that of the other UV-aligned FFS-LCD's.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.79-84
• /
• 2006

The next generation of optical storage systems requires higher numerical aperture(NA) objective lenses and shorter wavelength laser in order to improve the unit areal density. A blu-ray technology satisfies a miniaturization and a high capacity which are the requirements of the portable device. In this paper, we analyze the optical performance of hybrid micro lens and do active alignment. The hybrid micro lens is manufactured by using a wafer based fabrication technology. Optical components of hybrid micro lens are evaluated. The measurement of the optical power, the spot size and the wavefront error are performed to evaluate the hybrid micro lens with NA 0.85. Using the measured data, we estimate if the performance of hybrid micro lens corresponds to the designed performance. After the performance of hybrid micro lens is evaluated. the integrated optical pickup and the hybrid micro lens are assembled by active alignment using UV curing and the optical performance of SFFOP is satisfied with BD specifications.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.3
• /
• pp.220-225
• /
• 2004

This paper presents a program for the automatic alignment of optical axes and evaluation of the optical filter performance which is a key technologies for the production of optical module. Recently the production of optical filter module mostly depends upon handwork or semi-automation. Moreover, they have used an expensive spectrum analyzer. In this work, we have developed an automatic alignment and evaluation program of optical filter module using photo detector and developed program for automation and cost reduction of the production of optical titter module.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.449-452
• /
• 2009

Ink-jet printed (IJP) self-aligned (SA) organic light emitting diodes (OLEDs) and its application to light emitting seal have investigated. Ink-jet printing of light emitting material is carried out onto transparent anode covered with insulating material. Laminated light emitting seal with SA IJP OLED without photo - lithographic process and any vacuum process, noncontact type electromagnetic power supply without electric power supply line, and light emitting tag with network type RF communication terminal by controlling display information were demonstrated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.871-875
• /
• 2000

Effects of liquid crystal (LC) alignment using a in-situ photoalignment method by polarized UV exposure on a polyimide (PI) surface with medium side chain were studied. The generated pretilt angle in nematic(N) LC using a in-situ photoalignment method was smaller than that of a conventional photoalignment method for short UV exposure time. Also, the pretilt angle of NLC using a in-situ photoalignment method increases with increasing UV exposure time on the PI surfaces. Finally, the pretilt angle of NLC can be improved by annealing treatment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.502-505
• /
• 2003

We synthesized high thermal photoalignment material with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the photopolymer surface can be obtained. However, the low pretilt angles were obtained below $1^{\circ}$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN cell with UV exposure was observed. The response time of photoaligned TN cell was measured about 24 ms.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.951-954
• /
• 2001

We investigated the aligning capabilities for nematic liquid crystal (NLC) using a in-situ photodimerization method on various photopolymer surfaces. High Pretilt angle of the NLC can be measured by obliquely polarized UV exposure of 30$^{\circ}$on a photo-crosslinkable polyimide (PI) based polymer surface for 3 min. The pretilt angle of the NLC generated on the photopolymer surface using the in-situ photodimerization method was higher than that of a blending photopolymers (PI and cinnamate materials).

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.104-109
• /
• 2008

Nowadays, the researches for improving LCD manufacturing process and reducing cost are getting accelerated and additionally new types of process are widely developed. In this situation, APEM(Anti Photo Exposure Method) which does not need photo-lithography is realized as one of possible alternative of LCD process. APEM makes LCD pattern by stamping and it can reduce the process cost and process time because of its simplicity. But optical alignment between pattern glass and target glass is very critical fact to realize the precise patterns. So, the analysis of deflection of large size of glass is carried out and design of experiment method is applied for optimal design of jig.

• Korean Journal of Materials Research
• /
• v.32 no.6
• /
• pp.307-312
• /
• 2022

Metal halide perovskite (MHP) nanocrystals (NCs) have emerged as promising materials for various optoelectronic applications including photovoltaics, light-emitting devices, and photodetectors because of their high absorption coefficient, high diffusion length, and photoluminescence quantum yield. However, understanding the morphological evolution of the MHP NCs as well as their controlled assembly into optoelectronic devices is still challenging and will require further investigation of the colloidal chemistry. In this study, we found that the amount of n-octylamine (the capping agent) plays a crucial role in inducing further growth of the MHP NCs into one-dimensional nanowires during the aging process. In addition, we demonstrate that the dielectrophoresis process can permit self-alignment of the MHP nanowires with uniform distribution and orientation on interdigitated electrodes. A strong light-matter interaction in the MHP NWs array was observed under UV illumination, indicating the photo-induced activation of their luminescence and electrical current in the self-aligned MHP nanowire arrays.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1501-1504
• /
• 2006

The WV film successfully enlarged the field of view of the TN mode and made TN popular for larger size applications such as PC monitors. The hybrid alignment of the PDM (polymerized discotic material) layer is also suited for the OCB mode, which is promising as a nextgeneration LCD-TV because of fast panel response and a wide viewing angle. This paper describes recent technological progress in WV films, especially for OCB.