• Journal of the Optical Society of Korea
• /
• 제17권4호
• /
• pp.312-316
• /
• 2013

A novel fiber-optic sensor system is suggested in which fiber Bragg grating sensors are demodulated by a wavelength-sweeping fiber laser source and a spectrometer. The spectrometer consists of a diffraction grating and a 512-pixel photo-diode array. The reflected Bragg wavelength information is transformed into spatial intensity distribution on the photo-diode array. The peak locations linearly correspond to the Bragg wavelengths, regardless of the nonlinearities in the wavelength tuning mechanism of the fiber laser. The high power density of the fiber laser enables obtaining high signal-to-noise ratio outputs. The improved demodulation characteristics were experimentally demonstrated with a fiber Bragg grating sensor array with 5 gratings. The sensor outputs were in much more linear fashion compared with the conventional tunable band-pass filter demodulation. Also it showed advantages in signal processing, due to the high level of photo-diode array signals, over the broadband light source system, especially in measurement of fast varying dynamic physical quantities.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1291-1292
• /
• 2007

Recently, there were many researches for efficiency improvement of DSC. Among of these works, research of surface treatment is still a prerequisite for electron diffusion, light-harvesting and surface state of DSC.[1] Using of the surface treatment, it can be raise up porosity of $TiO_2$ nano-crystalline structure on photo-electrode. There are chemical, physical, electrical and optical methods which raise up its porosity. In this paper, we have designed and manufactured MOPA-type ultrasonic circuit (100W, frequency and duty variable). Manufactured ultrasonic circuit to use to force cavity density and power into $TiO_2$ paste. Then, we have optimized forcing time, frequency and duty of ultrasonic irradiation for surface treatment of photo-electrode of DSC. In I-V characteristic test of DSC, ultrasonic and thermal treated DSC shows 19% improved its efficiency against monolithic DSC. And it shows stability of light-harvesting from drastically change of light irradiation test.

• Restorative Dentistry and Endodontics
• /
• 제26권2호
• /
• pp.134-140
• /
• 2001

The polymerization shrinkage of composite resins is an important drawback although the composites have many advantages-more esthetic and conservative than metallic restoratives etc. The purposes of this research were to develop a new measurement method and to manufacture an instrument that can measure the initial dynamic volumetric shrinkage of composite resins during polymerization. The instrument was basically an electromagnetic balance that constructed with a force transducer using position sensitive photo detector(PSPD) and a negative feedback servo amplifier of proportional-derivative(PD) controller. The volumetric change of composites during polymerization was detected continuously as buoyancy change in distilled water by means of Archimedes's principle. It was converted to continuous electrical voltage signal in real time. The signal was properly conditioned and filtered and then it was stored in computer by a data acquisition(DAQ) board. By using this electronic instrument. the dynamic patterns of the polymerization shrinkage of eight commercial(Z-100, DenFil, AeliteFil, Z-250, P-60, SureFil, Synergy compact, and Tetric ceram) composite resins were measured and compared. The results were as follows. 1. From this project of developing instrument, the ability has been achieved that can acquire and process data of electrical signal transformed from various physical phenomenon by using temperature, displacement. photo. and force transducer. As a consequence, the instrumentation and measurement system used to analyze the physical characteristics of various dental materials in dental research field can be designed, manufactured and implemented in lab. 2. This instrument has some advantages. It was insensible to temperature change and could measure true dynamic volumetric shrinkage in real time without complicated process. It showed accuracy and high precision results with small standard deviation. 3. The polymerization shrinkage of composites was significantly different between brands and ranged from 2.47％ to 3.89％, The order of polymerization shrinkage was as follows, in order of increasing shrinkage, SureFil, P60, Z250, Z100, Synergy compact. DenFil, Tetric ceram, and AeliteFil. 4. The polymerization shrinkage rate per unit time, dVol％/dt, showed that the instrument can provide an indirect research method for polymerization reaction kinetics.

• 한국운동역학회지
• /
• 제22권1호
• /
• pp.105-111
• /
• 2012

The purpose of this study was to investigate the effect that difference in forefoot of shoe flexibility during the quick lunge from a jump smashing on the lower limbs and the plantar pressure distribution. For this 10 elite badminton players with over 10 years experience and right handed participated. Two kinds of badminton shoes were selected and tested mechanical testing for the forefoot flexibility. Motion analysis, ground reaction forces and plantar pressure distribution were recorded. It was required to conduct lunge movement after jumping smashing as possible as high. Photo sensor was located in 3 meter away from standing position and its height was 40 cm. Subjects were conducted to return original position after touching the sensor as under clear movement as possible as fast. Forefoot stiffness had an effect on shoe peak bending degree and peak bending angular velocity in propulsion phase. Forefoot flexibility had an effect on ankle plantar flexion and knee flexion moment. It appears that joint power on lower limb and peak plantar pressure were not influenced by the flexibility of shoes.

• 한국해양환경ㆍ에너지학회지
• /
• 제13권1호
• /
• pp.43-46
• /
• 2010

중소형 폐 선박으로부터 배출되는 FRP를 재활용하기 위한 방법으로 층상으로 배열된 로빙층과 매트층을 분리하는 것은 에너지 면에서나 환경적인 면에서 많은 장점을 가지고 있다. 비록 로빙층과 매트층은 모두 유리섬유로 이루어져있으나 수지함유량의 차이와 유리섬유의 조직형태의 차이로 인하여 재활용 용도는 매우 달라지고 있다. 그러나 로빙층은 매트층에 비해 얇은 두께로 존재한다는 이유로 인해 로빙층을 FRP에서 분리할 때 기계가 자동적으로 층간의 차이를 인식하기는 매우 어렵다. 따라서 이 추출과정에서 많은 로빙층의 손실과 공정의 난이도에 의한 처리시간 지연 등의 문제가 발생한다. 본 연구에서는 유리의 구성비가 다른 두 층의 화학적 성질의 차를 이용하여 광학적으로 층간 인식이 가능한 방법을 모색하였다. FRP에 대해 유리의 $SiO_2$와 반응하는 플루오르산(HF) 용액으로 처리한 후 수용성 염료를 도포한 경우 두 층간의 차별화가 확연하게 일어났다. 본 연구는 이 결과를 이용하여 폐 FRP의 면포분리 공정의 효율성을 극대화 할 수 있는 시스템을 개발 하였다.

• 한국CDE학회논문집
• /
• 제19권3호
• /
• pp.253-262
• /
• 2014

3D city model, which consisted of the 3D building models and their geospatial position and orientation, is becoming a valuable resource in virtual reality, navigation systems, civil engineering, etc. The purpose of this research is to propose the new framework to generate the 3D city model that satisfies visual and physical requirements in ground oriented simulation system. At the same time, the framework should meet the demand of the automatic creation and cost-effectiveness, which facilitates the usability of the proposed approach. To do that, I suggest the framework that leverages the mobile mapping system which automatically gathers high resolution images and supplement sensor information like position and direction of the image. And to resolve the problem from the sensor noise and a large number of the occlusions, the fusion of digital map data will be used. This paper describes the overall framework with major process and the recommended or demanded techniques for each processing step.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권1호
• /
• pp.55-59
• /
• 2009

중소형 폐 선박으로부터 생성되는 FRP를 재활용하기 위한 방법으로 층상으로 배열된 로빙층과 매트층을 분리하는 것은 에너지 면에서나 환경적인 면에서 많은 장점을 가지고 있다. 비록 로빙층과 매트층은 그 비율은 다르나 모두 수지와 유리를 포함한다는 유사성과 로빙층은 매트층에 비해 얇은 두께로 존재한다는 이유로 인해 로빙층을 매트층과 분리할 때 기계가 자동적으로 충간의 차이를 인식하기는 어렵다. 본 연구에서는 유리의 구성비가 다른 두 층의 화학적 성질의 차를 이용하여 광학적으로 층간 인식이 가능한 방법을 모색하였다. FRP에 대해 (1) FRP의 층 사이에 존재하는 수지를 녹이는 진한 황산, 또는 (2) 유리를 녹이는 염기성 용액(KOH의 메탄올과 아이소프로판올 용액), (3) 유리의 $SiO_2$와 반응하는 플루오르산(HF)용액, (4) HF 용액으로 처리한 후 수용성 염료를 도포한 경우, 각각 두 층간의 차별화가 일어났다. 이 결과를 이용하여 폐 FRP의 분리 공정이 단순화될 수 있을 것이다.

• 한국인쇄학회지
• /
• 제26권2호
• /
• pp.31-43
• /
• 2008

The functional dyes, which has various optical characteristics that can be applicable to field of electronic, photo electronic, such as sensor or electrode, were synthesized. Physical property and optical stability was studied with preparation of conductive type film as a kind of optical filter of plasma display panel, by adapting neon cut off dye, which can selectively absorbing between 580 and 610nm wavelength. The filter was prepared with PSA resin, which has functional group of - COOH and - OH, as binder. And the characters such as spectroscopy, heat-proof / wet-proof, thermal stability and commerciality, which must be held by functional dyes, were examined. Conductive type film is the kind of film includes only neon cut off dyes. For the neon cut off dyes, cyanine dyes can be applied. And it is observed that spectrum of before and after the durability test are not changed due to stability of dyes, as the result of coating on the mesh film with PSA binder.

• 한국산업융합학회 논문집
• /
• 제9권2호
• /
• pp.141-145
• /
• 2006

In case of sense case manufactured by method of outage capacity, sensitivity is declined by outside effect and method of the photo electricity has a problem in transmission. therefore, packing case of composite sense should be developed to improve such a problem about influence of outside environment and its property evaluation has been performed. Mechanical property and result of analysis & test evaluation of Mat'l on aluminum die-casting(ADC 12type) Mat'l developed are as following. Tensile test piece, No. 4 of KS B 0801, has been applied to mechanical property test of Mat'l and It has been tested by method of metal mat'l tensile test(KS B 0802 : 2003). It can be found that physical property to KS(Korea Standard) is excellent. and homogeneous mechanical property appears. Test of Mat'l analysis has been performed by using OE Spectrometer, according to ASTM E 1251 : 1994 regulation. Consequently, good and homogeneous component contents classified by element to standard, except for Fe, have been obtained with coordination of Fe content as below 1.3% from composition standard of Aluminum Die-casting.

• 센서학회지
• /
• 제7권2호
• /
• pp.131-139
• /
• 1998

$CdS_{0.67}Se_{0.33}$ 단결정을 승화법으로 성장시켜 Laue 배면 반사법 (back refection Laue method)으로 결정성과 면의 방향이 (0001)임을 알아보았고, EDS(Energy Dispersive X-ray Spectrometer)를 이용하여 소성비가 $CdS_{0.67}Se_{0.33}$ 임을 확인하였다. Van der Pauw 법으로 Hall 효과를 측정하여 운반자 농도(carrier density)와 이동도(mobility)의 온도의존성을 연구하였으며, 이동도는 30 K에서 150 K까지는 불순물에 의한 산란 (impurity scattering)에 기인하고 있으며, 150 K에서 293 K까지는 격자 산란 (lattice scattering)에 따라 감소하였다. 또한 운반자 농도의 In n 대 (1/T)에서 구한 활성화 에너지는 0.21 eV였다. 광전도 셀(cell)의 특성으로 spectral response, 최대 허용 소비전력(maximum allowable power dissipation: MAPD), 광전류와 암전류(photocurrent/darkcurrent: pc/dc) 및 응답시간을 측정하였다. Cu 증기분위기에서 열처리한 광전도 셀의 경우 ${\gamma}$ = 0.99, pc/dc = $1.84{\times}10^{7}$, MAPD : 323mW, rise time : 9.3ms, decay time : 9.7ms로 가장 좋은 특성을 얻었다.