• 제목/요약/키워드: Photo luminance

검색결과 19건 처리시간 0.027초

A new method for monitoring an OLED panel for lighting by sensing the wave-guided light

  • Han, Jun-Han;Moon, Jaehyun;Shin, Jin-Wook;Joo, Chul Woong;Cho, Doo-Hee;Hwang, Joohyun;Huh, Jin Woo;Chu, Hye Yong;Lee, Jeong-Ik
    • Journal of Information Display
    • /
    • 제13권3호
    • /
    • pp.119-123
    • /
    • 2012
  • In this work, we report on a new monitoring method for an organic light-emitting diode (OLED) panel for lighting by optical sensing of the wave-guided light in the substrate. Using microlens array films, the wave-guided light was extracted into the edge or back side of the panel to be monitored by a photodiode. The luminance of the extracted light was measured as linearly proportional to the front light. Thus, by converting the extracted light into photo voltage, monitoring the luminance change occurring in the OLED is possible. Based on the results and concepts, we have proposed a photodiode-equipped driving circuit which can generate compensated driving current for uniform luminance of OLED panels.

Photo-Induced Memory of an OLED in the presence of thio-Michler's ketone

  • Enokida, Toshio;Gwon, Tae-Sun
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.281-284
    • /
    • 2004
  • Photo-induced memory effect of an organic light-emitting diode(OLED) composed of a hydrazone-derivative(DBAH) dispersed in bis-phenol-A type polycarbonate polymer(PCA) in the presence of thio-Michler's ketone, was investigated by the measuring of the current density and luminance at the various conditions. After the light exposure, the current of the OLED was decreased approximately one order, and the luminance of the OLED also decresed. This memory effct was erasable by heating the OLED to the temperature higher than the glass transition temperature(Tg). As shown in this result, we found the memory effect was erased by heating and returned to its original state in the hole injecting layer(HIL) of the OLED. A series of these phenomena was suggested the possibility of the application to the imaging plate.

  • PDF

개선된 신경망과 사진 인증을 이용한 여권 인식 (Recognition of Passports using Enhanced Neural Networks and Photo Authentication)

  • 김광백;박현정
    • 한국정보통신학회논문지
    • /
    • 제10권5호
    • /
    • pp.983-989
    • /
    • 2006
  • 현재의 출입국 관리는 여권을 제시하면 여권을 육안으로 검색하고 수작업으로 정보를 입력하여 여권 데이터베이스와 대비하는 것이다. 본 논문에서는 여권의 정보를 인식 할 수 있는 방법을 제안한다. 제안된 여권 인식 방법은 소벨 연산자와 수평 스미어링, 윤곽선 추적 알고리즘을 적용하여 코드의 문자열 영역을 추출한다. 추출된 문자열 영역을 이진화하고 이진화된 문자열 영역에 대해서 개별 코드의 문자들을 복원하기 위하여 CDM 마스크를 적용한 후에 수직 스미어링을 적용하여 개별 코드의 문자를 추출한다. 개별 코드의 인식은 ART2 알고리즘을 RBF 네트워크의 중간층으로 적용하고 중간층과 출력층의 학습에는 일반화된 델타 학습 방법으로 동작하는 RBF 네트워크를 적용한다. 사진 영역은 코드의 문자열 영역을 추출한 후에 코드의 문자열 영역이 시작되는 좌표를 중심으로 사진 영역을 추출한 후, Luminance, Edge, Hue 정보를 이용하여 사진 부분을 검증한다. 검증된 사진 부분 영상은 ART2 알고리즘을 적용하여 사진의 특징들을 분류하고, 이를 이용하여 사진 인증을 하게 된다. 제안된 방법의 성능을 확인하기 위해서 실제 여권 영상을 대상으로 실험한 결과, 제안된 방법이 여권 인식에 우수한 성능이 있음을 확인하였다.

열처리된 Znq2에 기초한 유기 EL소자의 발광특성 (Luminance Characteristics of Organic Electroluminescent Devices Based on Znq12 by Heating)

  • 조성렬;정은실;박수길;정평진
    • 한국재료학회지
    • /
    • 제9권6호
    • /
    • pp.564-568
    • /
    • 1999
  • The 8-hydroxyquinoline Zinc(Znq2) were prepared successfully from zinc chloride and zinc acetate as two kinds of starting material. The organic electroluminescent devices(ELDs) were fabricated by the structure of ITO/TPD/Znq2/Al with N-N'-diphenyl-N-N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) which acts hole trasporting layer and bis(8-oxyquinolino) zinc(II)(Znq2) which acts as emission and electron transporting layer. EL efficiency of Znq2 prepared by heating was investigated. The 570nm of main emission peak which is yellowich green was investigated by photo luminesence(PL) and this results shows that electro luminescence(EL) is from Znq2. The V-J curve shows that carrier injection were investigated from 4V. Maximum luminance and luminance efficiency were 1600cd/$\m^2$, 0.9lm/W. From this results, the Znq2 can be one of the useful organic EL material.

  • PDF

Thermal Reflow 공정 적용 Micro Pattern 형상 변화를 통한 광 향상 구조층 연구 (Study on Optical Control Layer for Micro Pattern Shape Change Using Thermal Reflow Process)

  • 성민호;차지민;문성철;유시홍;이성의
    • 한국전기전자재료학회논문지
    • /
    • 제28권5호
    • /
    • pp.306-313
    • /
    • 2015
  • In this study, the change of optical characteristics was studied according to the micro optical pattern provided by photo lithography followed by thermal reflow process. The shape and luminance variation with micro pattern was evaluated by SEM and spectrometers. Also, we analyzed the luminance characteristics using the 3D-optical simulation (Optis works) program. As a result, we found that the radius of curvature(R) in micro pattern is decreased up to 77%($150^{\circ}C$) compared to the radius of curvature at the condition $100^{\circ}C$, which is caused by efficient reflow of organic material without chemical changes. The highest enhancement of brightness with optimum micro pattern was obtained at the condition of $120^{\circ}C$ reflow process. The brightness gain with optical micro patterns is more than 15% at the condition of R=16.95 um, ${\Theta}=77.14^{\circ}$ compared to original optical source. The results of light simulation with various radius of curvature and side angle of pattern shows the similar result of experiment evaluation of light behavior on optical micro patterns. It is regarded that the more effect on light enhancement was contributed by side angle which is effective factor on light reflection, rather than the curvature of micro-patterns.

LTPS TFT LCD 패널의 광 센서를 위한 dual slope 보정 회로 (Design of Readout Circuit with Dual Slope Correction for photo sensor of LTPS TFT-LCD)

  • 우두형
    • 대한전자공학회논문지SD
    • /
    • 제46권6호
    • /
    • pp.31-38
    • /
    • 2009
  • 휴대용 기기의 소비 전력을 낮추고 영상의 질을 개선하기 위해, 주변 밝기에 따라서 LCD 모듈의 백라이트를 조정하는 방법을 사용할 수 있다. 이를 효과적으로 구현하기 위해서 LCD 패널에 광 센서와 신호취득 회로를 집적하고자 했으며, LTPS TFT 공정을 이용하여 설계했다. 서로 다른 LCD 패널의 광 센서에 대한 특성 편차를 보정하기 위해 새로운 개념의 start-up 보정 방식을 제안하였다. 이와 더불어 광 전류 정보를 디지털 형태로 전달하기 위해 time-to-digital 방식을 사용하였으며, 이를 start-up 보정 방식과 효과적으로 결합하는 dual slope 보정 방법을 제안하였다. LTPS TFT 공정을 이용하여 최종적인 신호취득 회로를 구현하고자, 간단하고 안정적인 회로 구조와 타이밍을 제안하고 설계 및 검증을 진행했다. 설계한 신호취득 회로는 별도의 검사 설비 없이 광 센서 편차의 보정이 가능하며, 60dB 범위의 입력 광에 대해 10배수 구간 마다 4 단계의 디지털 데이터를 출력한다. 신호취득 속도는 100Hz이며, 디지털 변환의 선형 오차는 18% 미만이다.

경관조명 주관평가 실험에서의 평가대상 제시 방법에 대한 유효성 검증 (The Validity Verifying of Evaluation Object Method Proposal in Subject evaluation experiment for Exterior Lighting)

  • 이진숙;유재연;김병수
    • 조명전기설비학회논문지
    • /
    • 제17권4호
    • /
    • pp.1-7
    • /
    • 2003
  • 본 연구의 목적은 야간경관조명의 다양한 조명기법을 대상으로 컴퓨터 시뮬레이션을 통한 이미지 예측실험을 통해 조명기법별 평가특성을 분석하기 위한 기초연구로서 현장실험을 기준으로 물리량 및 주관 평가의 유효성을 검증하는데 있다. 연구는 우선 예비실험을 통해 선정된 평가어휘를 바탕으로 현장실험의 실험조건별 사진촬영과 물리량 측정 및 주관평가를 수행하여 조명 해석 프로그램에서 계산된 물리량과, 현장 실험에서 측정된 물리량을 비교하였으며 각각의 주관평가 결과를 가지고 현장과 CG, 현장과 사진에 대한 유효성을 검증하였다. 연구결과 1) 물리량의 유효성 검증결과 유의차가 5% 내외로 유의차가 없었으며 2) 현장실험과 CG, 현장실험과 사진실험의 주관평가 유효성 검증 결과 일부 항목을 제외한 대부분의 항목에서 유의차가 없는 것으로 나타났다.

펄스방사선 탐지를 위한 Photo Diode 출력특성 연구 (The Study of the Photo Diode Output Signal for Pusle Radiation Detection)

  • 황영관;이남호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 춘계학술대회
    • /
    • pp.869-871
    • /
    • 2012
  • 고도의 과학기술발전으로 인해 일상생활에서 전자기기의 사용이 급속도로 늘어가고 있다. 또한 태양의 흑점 폭발이나 북한의 핵폭탄, 원전 사고 등으로 인해 방사선에 대한 관심도가 증가하고 있다. 태양으로부터 방출되는 펄스형태의 방사선은 전자장비에 장애를 초래하며 특히 핵폭발 시 전달되는 고준위 펄스 방사선의 경우 전자부품에 오동작 및 불용상태로 까지 영향을 미칠 수 있다. 이러한 방사선 영향에 대한 연구는 국내외에서 다양하게 진행되고 있다. 본 논문에서는 이러한 전자 부품에 영향을 줄 수 있는 펄스방사선 탐지를 위해 Si 기반의 포토다이오드를 제작하고 이를 통해 펄스 입출력 신호에 대한 회로 시뮬레이션과 일반 광원을 이용한 출력 특성을 연구하였다. 본 연구의 결과는 고 에너지의 펄스 방사선 영향으로부터 전자회로를 보호하기 위한 추가적인 모듈의 입력 센서로 활용 될 수 있다.

  • PDF

라플라스 피라미드 융합을 이용한 역광영상의 개선 방법 (An Enhancement Technique for Backlit Images using Laplace Pyramid Fusion)

  • 김진헌
    • 전기전자학회논문지
    • /
    • 제26권2호
    • /
    • pp.292-298
    • /
    • 2022
  • 역광 조명에서 촬영된 영상은 한 장면에 지나치게 밝은 부분과 어두운 부분이 혼재되어 있어서 이를 전역적인 처리로 화질을 개선하는데는 한계가 있다. 본 논문은 역광 촬영된 사진을 각각 어두운 영역과 밝은 영역을 개선하는 두 장의 가상 영상으로 만들어 이를 원본 영상과 함께 라플라시안 피라미드로 융합하여 사진의 품질을 개선하는 방안에 대해 소개한다. 제안된 기법은 두 장의 가상 영상을 만들 때 LUT로 단순화할 수 있는 히스토그램 스트레칭과 감마변환을 활용하여 연산 부담을 저감하였다. 또한 색상 강화된 영상을 얻기 위해 HSV 좌표계를 사용하여 휘도에 대해서만 명암 변환을 실시하였다. 제안된 기법은 표준 영상 데이터 세트를 사용하여 몇 가지의 NIQA 지표를 산출하여 그 효용성을 보였다.

저분자 유기 광다이오드 소자의 p형 유기물 두께에 따른 전류 특성에 관한 연구 (A Study on the Thickness Dependence of p-type Organic Layer on the Current of Small Molecule-based Organic Photodiode)

  • 김영우;이동운;전용민;조의식;권상직
    • 반도체디스플레이기술학회지
    • /
    • 제22권3호
    • /
    • pp.101-105
    • /
    • 2023
  • Organic photo Diodes (OPDi) give multiple advantages in the growing interest of the flexible optoelectronic devices. Organic semiconductors are freeform as they can deposit on any substrate, so it could be flexible. But the inorganic material photodiodes (PDs) are usually fabricated on silicon wafers which are solid. So, normally PDs are inflexible. By those reasons, we decided to make the vacuum deposited small molecule OPDi. We have investigated the OPDi's J-V characteristic by changing the thickness of p-type layer of OPDi. This device consists of indium-tin-oxide (ITO) / 2,3:6,7-dibenzanthracene (pentacene) / buckminsterfullerene (C60) / aluminum (Al). Its J-V characteristics were measured in the probe station(4156C) that can give dark condition while measuring. And for the luminance characteristics, the photocurrent was measured with the bright halogen lamp and a probe station.

  • PDF