• 태양에너지
• /
• 제5권2호
• /
• pp.46-53
• /
• 1985

Hydrogenated amorphous silicon solar cells which are fabricated by photo-chemical vapor deposition (photo-CVD) system has been investigated. In the photo-CVD system which consists of three separate reaction chambers, low-pressure mercury lamp has been used as a light source. The main reactant ($Si_2H_6/He$) gases which are premixed with a small amount of mercury vapor in a mercury-vaporizer kept at $50^{\circ}C$ have been used. Using $C_2H_2$ and $SiH_2(CH_3)_2$ as the carbon source, p-type wide band gap a-SiC:H films have been obtained. The result has been found that the undoped layers of the pin/substrate solar cells are influenced by the residual impurities, such as phosphorus and boron during the deposition process. By minimizing the effect of the impurities in the i-layer and optimizing conditions at the p-layer and p/i interface, the energy conversion efficiency of 9.61 % under AM-1 ($100mW/Cm^2$) has been achieved for pin/substrate solar cells illuminated through their p-layers, using the three separate reaction chamber apparatus. It is expected that a-SiC:H solar cells with the energy conversion efficiency over 10% have been fabricated by Photo-CVD method.

• 한국컴퓨터그래픽스학회논문지
• /
• 제30권3호
• /
• pp.149-158
• /
• 2024

오프라인에서 사진을 촬영하는 포토부스는 자신이 원하는 포즈와 소품 등을 통해 자연스럽게 나다운 모습을 촬영할 수 있으며, 함께한 사람들과 추억을 공유하는 특별한 경험을 선사한다. 최근 다양한 표현을 가능하게 하고자 생성형 AI를 활용한 포토부스 사례들이 등장했다. 그러나 기존 AI 포토부스는 단체 사진 촬영이 불가능하고, 대부분 사용자의 포즈를 반영하지 못하며, 개별 인물마다 다른 컨셉을 적용하기 어려운 한계가 존재한다. 본 연구는 이러한 문제를 해결하여 사용자가 자유롭게 포즈와 위치, 컨셉을 선택하여 촬영할 수 있는 AI 포토부스 시네마픽을 제안한다. 인물별 개별 컨셉 적용을 위해 개별 생성 워크플로우를 전처리, 생성, 후처리 세 단계로 설계하고, 이를 실제 프로토타입으로 구현했다. 이 과정에서 인물별 투명 이미지 생성, 배경 생성 후 합성시 발생하는 아티팩트를 줄이는 재생성 테크닉, 최적화 모델 적용 및 GPU 병렬화 등 다양한 방식을 워크플로우에 통합하여 한계점을 극복하였다. 사용자 품질 평가와 약 400명의 사용자를 대상으로 대규모 시범 운영을 통해 시스템의 효과성을 검증했다. 그 결과, 사용자들은 기존 방식에 비해 높은 선호도를 보였으며, 이를 통해 실제 포토부스로의 도입 가능성을 확인했다. 본 연구에서 제안하는 AI 포토부스 시네마픽은 더욱 창의적이고 차별화된 시장을 개척할 수 있을 것으로 기대하며, 앞으로 다양한 응용 분야에서 널리 활용될 것으로 기대된다.

• 대한의용생체공학회:의공학회지
• /
• 제5권2호
• /
• pp.149-154
• /
• 1984

A digital X-ray system was designed using photo-diode arrays. This system consists of the following five sub-units; (1) slit and driving system (2) X-ray detection system (3) data-conversion system (4) computer (5) image display system. Using this system, one can obtain scatter-free, high contrast, digitally formatted, high quality image, as compared with the conventional film-based X-ray system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권3호
• /
• pp.387-393
• /
• 2008

This paper has dealt with the probability of oyster shell desiccant cooling system driven by renewable energy of photo-volatic effect with fundamental experiment. The test materials for desiccant are activated charcoal, silica-gel, hi-dry, and oyster shell. The experiments were mainly performed with focusing on the observation of surface features, adsorption amounts of the adsorbent species, and the effect of temperature. Oyster shell has sufficient probability for using as desiccant in a air-conditioning system. Moreover, the heat releasing device would be attached in the system, the system based with oyster shell can be operated with high efficiency.

• 한국전자통신학회논문지
• /
• 제7권3호
• /
• pp.579-583
• /
• 2012

환경적으로 발생하는 미세입자를 감지하는 시스템을 설계하고 제작하였다. 미세입자 감지시스템은 광산란 현상을 이용하였으며, 레이저다이오우드, 렌즈, aperture, 수광소자로 구성되어진다. 검출시스템의 성능을 좋게 하기 위해 aperture, 렌즈, 수광소자의 위치를 시뮬레이션을 통해 최적화하였다. 제작된 감지시스템으로 유입되는 미세입자에 의한 광산란을 감지하므로 빠른 응답특성를 가지는 미세입자 감지시스템을 제작하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.117-117
• /
• 2007

• Spatial Information Research
• /
• 제11권1호
• /
• pp.33-40
• /
• 2003

본 논문에서는 도로 및 도로시설물의 신설과 보완에 관련된 정보의 효과적인 관리를 위해 CCD(Charge-Coupled Device) 카메라, GPS(Global Positioning Systems), INS(Inertial Navigation Systems)와 같은 3개의 위치관측센서를 통합한 차량을 이용하여 시범지역을 측량하고 이를 통해 획득된 자료를 구조적으로 Photo Database에 저장할 수 있는 방안을 제시하였다. 저장된 Database를 이용한 도로시설물관리시스템의 프로토타입(Prototype)은 해당지점에 대한 실제사진을 이용해서 사용자의 대상물에 대한 인식성을 높이고 속성정보와의 연계를 통해서 해당 시설물에 대한 정성적인 정보추출과 관리가 가능함을 보여주었다.

• 한국정밀공학회지
• /
• 제11권5호
• /
• pp.180-188
• /
• 1994

Error assessment and evaluation for machine for machine tool slides have been considered as essential tools for improving accuracy. In this paper, a computer aided measurement technique is proposed using photo pin diodes of quadrant type and laser source. In thedeveloped system, three photo diodes are mounted on a sensor mounting table, and the sensored signal is processed by specially designed signal conditioner to give fine resolution with minimum noise. A micro computer inputs the processed signal, and the geometric errors of five degree of freedoms are successfully evaluated. Pitch, roll, yaw, vertical and horizontal straightness errors are thus assessed simultaneously for a machine tool slide. Calibration techniques such as optics calibration, photo diode calibration are proposed and implemented, giving precise calibration for the measurement system. The developed system has been applied to a practical machine tool slide, and has been found as one of efficient and precise technique for machine tool slide.

• Rapid Communication in Photoscience
• /
• 제3권4호
• /
• pp.64-66
• /
• 2014

Synthesis of a deuterium-labeled derivative of nitrospirobenzopyran (NSP), one of representative photochromic compounds, has been described. Four deuteriums were successfully introduced on 1-methyl and ${\alpha}$-methyne relative to spiro-carbon in the title compound with more than 95atom%D purity. Main photodegraded products of NSP were two oxindoles in acetonitrile, and additional products were formed in poly(isobutyl-methacrylate) films possibly due to restricted molecular motion in polymer matrix. Quantitative HPLC analysis revealed that partial introduction of deuterium to NSP brought a noticeable isotope effect, recognizable enhancement in photo-resistivity of NSP, i.e.,8.3% in solutions and 29% in polymeric films.

• Nuclear Engineering and Technology
• /
• 제31권5호
• /
• pp.506-511
• /
• 1999

The pilot system for radioactive liquid laundry waste was developed with treatment capacity, 1ton/hr and set up in the Yong Kwang unit #4. The system is composed of tank module, RO systems and a UV/$H_2O$$_2$photo-oxidation unit. The RO system consists of the BW unit (low-pressure RO for brackish water desalination) and the SW unit (high-pressure RO for seawater desalination). The BW unit possesses 4 RO membranes and it can reduce the feed water volume down to 1/10. This concentrated feed water can be reduced again up to 1/10 in its volume in the SW unit composed of 4 RO membranes. The UV/$H_2O$$_2$ photo-oxidation process unit was used for the detergent degradation. The operation of the pilot system was carried out and verified in its capability through the continuous operation and concentration operation using the actual liquid waste from the power plant. The design criteria and data for industrialization were yielded. The efficiency of the UV/$H_2O$$_2$ photo-oxidation process and the optimum operational procedure were evaluated. The decontamination factors for radioactive cobalt and cesium were measured. This on-site test showed the experimental result in the DF$\geq$300 and volume reduction factor$\geq$100.