• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.30-36
• /
• 2004

The development of LD(Laser Diode) tester and its control system based on the graphical programming language(LabVIEW) is addressed. The ill tester is used to check the optic power and the optic spectrum of the LD Chip. The emitter size of LD chip and the diameter of the Detector(optic fiber and photo diode) are very small, therefore the test device needs high accuracy. But each motion part of the test device could not accomplish high accuracy due to the limit of the mechanical performance. So, an image processing with machine vision is proposed to compensate for the error. By adopting our method we can reduce the error of position within $\pm$5$\mu\textrm{m}$.

• KSBB Journal
• /
• 제27권4호
• /
• pp.263-267
• /
• 2012

The purpose of this study was to determine optimum value of aeration rate for the cultivation of Chlorella sp. under illumination of red light emitting diode. The aeration rates varied from 0 to 2.4 vvm under the illumination of 4,400 lux of red light emitting diode. The highest specific growth rate of $1.51\;day^{-1}$ was obtained at the aeration of 0.7 vvm and lower specific growth rates were obtained for other aeration tests. Furthermore, the highest biomass concentration (1.02 g/L) was also obtained at the aeration of 0.7 vvm. Therefore, aeration of 0.7 vvm was determined to be the optimum aeration rate for the cultivation of Chlorella sp. under red light emitting diode.

• 한국군사과학기술학회지
• /
• 제10권4호
• /
• pp.152-159
• /
• 2007

In this paper, a new design technique on the LRF which is useful for low power laser and a CBDA(Cummulative Binary Detection Algorithm) is proposed. The LD(Laser Diode) and Si-APD(Silicon Avalanche Photo Diode) are used for saving a power. In order to prove the detection range, the Si-APD binary data are accumulated before the range computation and the range finding algorithm. A prototype of the proposed DLRF(Diode Laser Range Finder) system was made and tested. An experimental result shows that the DLRF system have the same detection range using a less power(almost 1/32) than an usual military LRF. The proposed DLRF can be applied to the Unmanned Vehicles, Robot and Future Combat System of a tiny size and a low power LRF.

• 전자공학회논문지T
• /
• 제35T권3호
• /
• pp.1-8
• /
• 1998

본 논문에서는 레이저 다이오드, 포토 다이오드, 그레이팅 렌즈, 빔 스프릿터가 반도체 공정으로 직접화된 홀로그램 레이저 다이오드와 4 와이어 부동형 엑츄에이터를 이용하여, 시장성이 풍부한 일반 오디오용 광학 픽업을 설계하였다. 또한, 이러한 홀로그램 레이저 다이오드의 특성을 이용하여 초간편 광학계를 구현하므로서, 기존외 제품 대비 조립성과 생산성을 향상시키고, 취부 부품의 수를 줄이고 형상을 단순화하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.272-272
• /
• 2012

Additional neutral particle analyzer has been installed to investigate the variation of fast ion tails with regard to the line of sight during 2012 KSTAR campaign. The system has the same photo-diode particle detector as previous system [1]. Both newly installed system and previous system modifield for 2012 campaign have two channels. One has a particle stopper transparent to hard X-ray, the other has no one. It will be used to separate the hard X-ray component from total hard X-ray and fast neutral counts. It is expected to measure fast ion tails more clearly through this extended system. A detailed system and calibration result will be presented in the conference.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.29-30
• /
• 2012

The objectives of this study are to examine the variation of flame chemiluminescence on flame condition and to evaluate the possibility to apply the optical sensor for air/fuel ratio control. Flame chemiluminescence is one of the most important factor to judge the real time flame condition like a air/fuel ratio. In this paper, it is experimentally found that a strong relationship between the air/fuel ratio and optical element output (i.e., photo diode) should be existed. This is verified through the flame spectral analysis for various PD output signal.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.89-92
• /
• 2000

Laser claddmg 1s thc deposition of material on the surface of a part or workpiece. Cladding of metals produces a 100% dense metallurgically-bonded coating with minimal dilution for enhanced corrosion, abrasion and wear resistance. Despite of minimal heat Input and reduced processing time, cladding quality 1s affected by various process condition such as laser power and feed rate. Therefore, it is necessary to develop the momtoring and control methods of laser cladding process for the best cladding quality. In this paper, laser cladding monitoring system using CCD camera for measuring cladding pool shape, and photo-diode sensor for detecting optical signal emitted from the cladding front is introduced The variables extracted using this system can be apphed to control the laser cladding system to achieve the best claddmg results..

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.319-320
• /
• 2015

This study is aiming to establish the relationship between the optical signal of flame through an optical fiber and the equivalent ratio of flame. In this experiment, flame optical signal in a furnace is measured using photodiode. The combustion system is composed of 15W turbulent burner and industrial boiler, and flame chemiluminescence is measured at various experimental conditions. In this study, the flame chemiluminescence of turbulent premixed flame is measured using commercially available photodiode. It is experimentally investigated the relationship between equivalent ratio and photodiode signal.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.869-871
• /
• 2012

고도의 과학기술발전으로 인해 일상생활에서 전자기기의 사용이 급속도로 늘어가고 있다. 또한 태양의 흑점 폭발이나 북한의 핵폭탄, 원전 사고 등으로 인해 방사선에 대한 관심도가 증가하고 있다. 태양으로부터 방출되는 펄스형태의 방사선은 전자장비에 장애를 초래하며 특히 핵폭발 시 전달되는 고준위 펄스 방사선의 경우 전자부품에 오동작 및 불용상태로 까지 영향을 미칠 수 있다. 이러한 방사선 영향에 대한 연구는 국내외에서 다양하게 진행되고 있다. 본 논문에서는 이러한 전자 부품에 영향을 줄 수 있는 펄스방사선 탐지를 위해 Si 기반의 포토다이오드를 제작하고 이를 통해 펄스 입출력 신호에 대한 회로 시뮬레이션과 일반 광원을 이용한 출력 특성을 연구하였다. 본 연구의 결과는 고 에너지의 펄스 방사선 영향으로부터 전자회로를 보호하기 위한 추가적인 모듈의 입력 센서로 활용 될 수 있다.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.1049-1054
• /
• 2011

Color is discerned due to the reflectance of object and its hue is determined by the Ratio of RGB spectrum. The aim of this study is to evaluate the Color information using by the optical system in terms of convenience and simplicity. Firstly, the differential Ratio of RGB is evaluated by photodiode Sensor which achieves a high efficiency with quick tranducer output. To extract the information of RGB Ratio, light emitting diode is built in Color sensing system with photodiode. Our proposed method is very economical, simple, and convenient. Our results can be applied to confirm the accurate information of Color in the research environments and commercial purposes. Thus RGB information can be determined subjectively and thus, the inherent characteristic of Color will be revealed precisely and its related features can be resolved in a real time mode.