• Journal of Applied Biological Chemistry
• /
• 제63권3호
• /
• pp.267-274
• /
• 2020

상추 중 살균제 mandipropamid 및 살충제 thiamethoxam의 생산단계 잔류허용기준(PHRLs)를 추정하기 위해 3곳의 상추 시설재배지에서 두 약제의 경시적 잔류량 감소특성을 조사하였다. 상추 중 농약 잔류량은 HPLC-PDA 또는 UVD를 이용하여 분석하였으며 우수한 회수율 및 변이값을 보여 분석의 유효성을 확보하였다. 농약안전사용기준에 따라 약제살포 권고량을 살포한 후 살포 후 수확일(PHI)을 포함한 10일 동안 출하시기에 적합한 개체를 채취하여 잔류량을 분석하였다. 포장별 초기 평균 잔류량은 mandipropamid 6.68-17.87 mg/kg, thiamethoxam 4.96-8.31 mg/kg이었고 10일 경과 후 각각 초기잔류량의 16-54 및 14-44% 수준으로 감소하였다. Thiamethoxam의 대사산물인 clothianidin은 <0.02-0.37 mg/kg으로 검출되었다. 상추 중 두 약제의 잔류량은 단순 1차 감쇄반응처럼 감소하였으며 포장구분없이 일자별 잔류량 회귀식을 산출한 결과, 평균 감소상수 및 생물학적 반감기는 mandipropamid의 경우 -0.1060 및 6.5일이었고 thiamethoxam은 -0.1236 및 5.6일이었다. 상추 잔류량 감소상수의 95% 신뢰구간 상한치는 mandipropamid -0.0746 및 thiamethoxam -0.1091이었으며, 출하 10일 및 5일 전 PHRLs은 mandipropamid의 경우 63.24 및 43.56 mg/kg, thiamethoxam은 44.66 및 25.88 mg/kg으로 산출되었다. 본 연구결과는 농가에서 농작물 출하시기를 조절하는데 활용될 수 있으며 농가의 소득 안정화에 기여할 것으로 판단된다.

• 천문학회보
• /
• 제37권2호
• /
• pp.207.1-207.1
• /
• 2012

One of the key aspects of the upcoming Ultra-Fast Observatory (UFFO) Pathfinder for Gamma-Ray Bursts(GRBs) identification will be the UFFO Burst Alert & Trigger Telescope(UBAT), based on a novel space telescope technique. The UBAT consists of coded mask, hopper, and detector module(DM). The UBAT DM consists of YSO crystal arrays, multi-anode photo mulipliers, and readout electronics. We will present the design and construction of the UBAT DM, and the response of the UBAT DM to X-ray sources.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1210-1210
• /
• 2001

On farm analysis of protein, moisture and oil in cereals and oil seeds is quickly being adopted by Australian farmers. The benefits of being able to measure protein and oil in grains and oil seeds are several : $\square$ Optimize crop payments $\square$ Monitor effects of fertilization $\square$ Blend on farm to meet market requirements $\square$ Off farm marketing - sell crop with load by load analysis However farmers are not NIR spectroscopists and the process of calibrating instruments has to the duty of the supplier. With the potential number of On Farm analyser being in the thousands, then the task of calibrating each instrument would be impossible, let alone the problems encountered with updating calibrations from season to season. As such, NIR technology Australia has developed a mechanism for \ulcorner\ulcorner\ulcorner their range of Cropscan 2000G NIR analysers so that a single calibration can be transferred from the master instrument to every slave instrument. Whole grain analysis has been developed over the last 10 years using Near Infrared Transmission through a sample of grain with a pathlength varying from 5-30mm. A continuous spectrum from 800-1100nm is the optimal wavelength coverage fro these applications and a grating based spectrophotometer has proven to provide the best means of producing this spectrum. The most important aspect of standardizing NIB instruments is to duplicate the spectral information. The task is to align spectrum from the slave instruments to the master instrument in terms of wavelength positioning and then to adjust the spectral response at each wavelength in order that the slave instruments mimic the master instrument. The Cropscan 2000G and 2000B Whole Grain Analyser use flat field spectrographs to produce a spectrum from 720-1100nm and a silicon photodiode array detector to collect the spectrum at approximately 10nm intervals. The concave holographic gratings used in the flat field spectrographs are produced by a process of photo lithography. As such each grating is an exact replica of the original. To align wavelengths in these instruments, NIR wheat sample scanned on the master and the slave instruments provides three check points in the spectrum to make a more exact alignment. Once the wavelengths are matched then many samples of wheat, approximately 10, exhibiting absorbances from 2 to 4.5 Abu, are scanned on the master and then on each slave. Using a simple linear regression technique, a slope and bias adjustment is made for each pixel of the detector. This process corrects the spectral response at each wavelength so that the slave instruments produce the same spectra as the master instrument. It is important to use as broad a range of absorbances in the samples so that a good slope and bias estimate can be calculated. These Slope and Bias (S'||'&'||'B) factors are then downloaded into the slave instruments. Calibrations developed on the master instrument can then be downloaded onto the slave instruments and perform similarly to the master instrument. The data shown in this paper illustrates the process of calculating these S'||'&'||'B factors and the transfer of calibrations for wheat, barley and sorghum between several instruments.

• 한국방사선학회논문지
• /
• 제17권3호
• /
• pp.473-479
• /
• 2023

본 연구에서는 고 에너지를 이용한 전립샘암의 방사선 치료 시 발생되는 광중성자의 선량을 광자극발광선량계를 사용하여 측정하였다. 이에 따른 복부에 발생되는 유효선량에 의한 유전적 위험확률을 연구하고자 하였다. 15 MV 에너지 발생이 가능한 의료용 선형가속기 True Beam STx(Varian Medical Systems, USA)와 방사선 치료 계획 시스템(Eclipse, Varian Medical System, USA)을 사용하였다. 선형가속기 Couch 위에 인체팬텀을 설치하고, 광중성자 선량의 측정은 Albedo Neutron Optical Stimulation Luminescence Neutron Detector(Landauer Inc., IL, USA)를 사용하였다. VMAT과 3C-CRT 의 복부에서 광중성자 선량값은 VMAT이 3D-CRT에 비하여 2배 이상 높은 52.8 mSv 였다. 전립샘암의 방사선 치료 시, 광중성자 선량으로 인한 복부에 발생되는 유효선량에 의한 유전적 위험확률은 VMAT는 1,000명 당 3.2명, 3D-CRT는 1.4명이 발생률임을 산출하였다. 전립샘암의 방사선 치료 시 발생할 수 있는 큰 부작용이 있는 복부를 연구함으로써 전립샘암 환자들의 삶의 질과 확률적 영향을 연구하는데에 의미 있는 연구로 활용되어지길 기대한다.

• Journal of Astronomy and Space Sciences
• /
• 제30권3호
• /
• pp.193-206
• /
• 2013

The detector subsystem of the Optical Wide-field Patrol (OWL) network efficiently acquires the position and time information of moving objects such as artificial satellites through its chopper system, which consists of 4 blades in front of the CCD camera. Using this system, it is possible to get more position data with the same exposure time by changing the streaks of the moving objects into many pieces with the fast rotating blades during sidereal tracking. At the same time, the time data from the rotating chopper can be acquired by the time tagger connected to the photo diode. To analyze the orbits of the targets detected in the image data of such a system, a sequential procedure of determining the positions of separated streak lines was developed that involved calculating the World Coordinate System (WCS) solution to transform the positions into equatorial coordinate systems, and finally combining the time log records from the time tagger with the transformed position data. We introduce this procedure and the preliminary results of the application of this procedure to the test observation images.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.717-722
• /
• 2004

A design was done, and all characteristic of photodetectr of the web pattern type which a standard process of the Bipolar which Si PIN structure was used in this paper, and was used for the current amplifier design was used, and high-speed, was used as receiving optcal area of high altitude, and the module which had a low dark current characteristic was implemented with one chip with a base. Important area decreases an area of Ie at the time of this in order to consider an electrical characteristic and economy than the existing receiving IC, and performance of a product and confidence are got done in incense. First of all, the receiving IC which a spec, pattern of a wafer to he satisfied with the following electrical optical characteristic that produced receiving IC of 5V and structure are determined, and did one-chip is made. On the other hand, the time when AR layer of double is $Si_{3}N_{4}/SiO_{2}=1500/1800$ has an optical reflectivity of less than $10{\%}$ on an incidence optical wavelength of 660 ,and, in case of photo detector which reverse voltage made with 1.8V runs in 1.65V, an error about a change of thickness is very the thickness that can be improved surely. And, as for the optical current characteristic, about 5 times increases had the optical current with 274nA in 55nA when Pc was -27dBm. A BJT process is used, and receiving IC running electricity suitable for low voltage and an optical characteristic in minimum 1.8V with a base with two phases is made with one chip. IC of low voltage operates in 1.8V and 3.0V at the same time, and optical link receiving IC is going to be implemented

• 전기전자학회논문지
• /
• 제13권4호
• /
• pp.70-74
• /
• 2009

본 논문에서는 백색 LED와 PD를 이용하여 가시광 무선 통신 링크를 제안하였다. 제안된 구조는 Q-factor와 eye pattern을 이용하여 실험을 통해 그 특성을 분석하였다. 또한, 일반적으로 사용되는 조명용 형광등을 이용하여 간섭광 잡음 환경에 대한 송, 수신 특성을 분석하였다. LED와 PD 모듈간의 거리가 1m일 경우, 10Mb/s 까지 비트 오율 없이 전송 가능함을 알 수 있었으며, 간섭광 잡음 환경 하에서는 5Mb/s 까지 낮은 비트오율로 전송 가능함을 알 수 있었다. 또한, 수신기의 위치가 중심축으로부터 5cm 와 10cm 떨어진 거리에 위치해 있는 경우 각각 10Mb/s와 1Mb/s 의 데이터까지 낮은 비트오율로 전송 가능함을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.194.1-194.1
• /
• 2015

Transition metal dichalcogenide (TMD) with layered structure, has recently been considered as promising candidate for next-generation flexible electronic and optoelectronic devices because of its superior electrical, optical, and mechanical properties.[1] Scalability of thickness down to a monolayer and van der Waals expitaxial structure without surface dangling bonds (consequently, native oxides) make TMD-based thin film transistors (TFTs) that are immune to the short channel effect (SCE) and provide very high field effect mobility (${\sim}200cm^2/V-sec$ that is comparable to the universal mobility of Si), respectively.[2] In addition, an excellent photo-detector with a wide spectral range from ultraviolet (UV) to close infrared (IR) is achievable with using $WSe_2$, since its energy bandgap varies between 1.2 eV (bulk) and 1.8 eV (monolayer), depending on layer thickness.[3] However, one of the critical issues that hinders the successful integration of $WSe_2$ electronic and optoelectronic devices is the lack of a reliable and controllable doping method. Such a component is essential for inducing a shift in the Fermi level, which subsequently enables wide modulations of its electrical and optical properties. In this work, we demonstrate n-doping method for $WSe_2$ on poly-4-vinylphenol and poly (melamine-co-formaldehyde) (PVP/PMF) insulating layer and adjust the doping level of $WSe_2$ by controlling concentration of PMF in the PVP/PMF layer. We investigated the doping of $WSe_2$ by PVP/PMF layer in terms of electronic and optoelectronic devices using Raman spectroscopy, electrical measurements, and optical measurements.

• 한국화재소방학회논문지
• /
• 제29권4호
• /
• pp.81-88
• /
• 2015

본 연구에서는 다양한 화재실험에서 광학 연기밀도 측정을 위하여 광소멸법을 이용한 저가형 장치가 개발되었다. 저가형 장치의 상대적 측정 정확도는 He-Ne 레이저, 포토디텍터 및 다양한 광학부품을 이용한 고가의 표준장치에 의해 측정된 연기밀도의 비교를 통해 평가되었다. 저가형 장치는 레이저 모듈, 포토셀 그리고 아크릴 보드로 구성되었다. 연기농도의 조절이 용이한 연기 발생장치 실험을 통해, 저가형 장치는 표준장치에 비해 ${\pm}10%$의 범위 내에서 연기밀도를 측정할 수 있음을 확인하였다. 저가 장치의 신뢰성은 또한 폴리에틸렌 화염을 이용한 실험에서도 확인되었다. 결론적으로 개발된 저가형 장치는 연기밀도 측정을 위한 간편한 설치 및 실시간 측정과 함께 고가의 표준장치를 대신하여 사용될 것으로 기대된다.

• 한국산업보건학회지
• /
• 제21권1호
• /
• pp.11-24
• /
• 2011

Working in a research laboratory means exposure to a wide range of hazardous substances. Several studies indicated that laboratory workers, especially working with chemicals, might have an increased risk of certain cancers. However, exposure assessment data in laboratory settings are scarce. This study was performed to examine several approaches for quantitatively assessing the exposure levels to volatile organic compounds (VOCs) among workers in chemistry laboratories. The list of 10 target VOCs, including ethanol, acetone, 2-propanol, dichlormethane, tetrahydrofuran, benzene, toluene, n-hexane, ethyl acetate, chloroform, was determined through self-administered questionnaire for six chemistry research laboratories in a university, a government-funded research institute, or private labs. From September to December 2008, 84 air samples were collected (15 area samples, 27 personal time weighted samples, 42 personal task-basis short-term samples). Real time monitors with photo ionization detector were placed during the sampling periods. In this study, benzene was observed exceeding the action levels, although all the results were below the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV). From the air sampling results, we concluded that (1) chemicals emitted during experiments could directly affect to neighbor office areas (2) chemical exposures in research laboratories showed a wide range of concentrations depending on research activities (3) area samples tended to underestimate the exposures relative to personal samples. Still, further investigation, is necessary for developing exposure assessment strategies specific to laboratories with unique exposure profiles.