• Journal of Periodontal and Implant Science
• /
• 제43권6호
• /
• pp.291-300
• /
• 2013

Purpose: Calcium phosphate (CaP)-coated implants promote osseointegration and survival rate. The aim of this study was to (1) analyze the dissolution behavior of the residual CaP particles of removed implants and (2) evaluate bone apposition of CaP-coated machined surface implants at the early healing phase. Methods: Mandibular premolars were extracted from five dogs. After eight weeks, the implants were placed according to drilling protocols: a nonmobile implant (NI) group and rotational implant (RI) group. For CaP dissolution behavior analysis, 8 implants were removed after 0, 1, 2, and 4 weeks. The surface morphology and deposition of the coatings were observed. For bone apposition analysis, block sections were obtained after 1-, 2-, and 4-week healing periods and the specimens were analyzed. Results: Calcium and phosphorus were detected in the implants that were removed immediately after insertion, and the other implants were composed mainly of titanium. There were no notable differences between the NI and RI groups in terms of the healing process. The bone-to-implant contact and bone density in the RI group showed a remarkable increase after 2 weeks of healing. Conclusions: It can be speculated that the CaP coating dissolves early in the healing phase and chemically induces early bone formation regardless of the primary stability.

• Journal of Pharmaceutical Investigation
• /
• 제37권3호
• /
• pp.193-196
• /
• 2007

This study aimed to evaluate and develop $Eudragit^{(R)}$-coated pellets based on the dissolution using the paddle method. As coating materials, two types of $Eudragit^{(R)}$ were applied to obtain either sustained release form or fast released form. The dissolution test was carried out in phosphate buffer solution (pH 6.5) at $37^{\circ}C$, 100 rpm. In order to develop a sustained release preparation containing felodipine, a comparative dissolution study was done using commercial product as a control. The dissolution at 30 min of felodipine from $Eudragit^{(R)}$ RS or RL-coated pellets were 0.96% and 99.65, respectively. The weight ratio of $Eudragit^{(R)}$ RL pellets to RS pellets altered the dissolution rate, but did not optimize the dissolution rate. However, the sustained dissolution of felodipine from pellets was optimized by varying the coating ratios of $Eudragit^{(R)}$ RS. It is suggested that the coating ratio of pellets is the main factor which controls dissolution rate. Taken together, $Eudragit^{(R)}$ RS 30D-coated pellets showed the most comparable dissolution rate pattern to commercial product, $Splendil^{(R)}$. This sustained release pellets for oral delivery system of felodipine was simply manufactured, and drug release behavior was highly reproducible.

• 한국응용과학기술학회지
• /
• 제38권6호
• /
• pp.1678-1686
• /
• 2021

본 연구에서는 가교제인 붕산과 아크릴 수지 바인더에 삼인산(3 인산), 피트산(6 인산) 또는 폴리인산암모늄(10 인산)을 혼합하여 인계 난연 코팅액을 제조하였다. 제조된 인계 난연 코팅액을 부직포에 각각 코팅하여 높은 난연 효과를 얻었다. 이렇게 제조된 난연성 부직포를 연기밀도기준시험(ASTM E662), 산소한계지수기준시험(ISO E622), 수직연소기준시험(UL 94)을 이용하여 평가하였다. 그들의 난연 효과는 phosphate 그룹의 수에 의해 영향을 받았으며, 천연 또는 합성 바인더 수지에 관계없이 그 효과는 ammonium polyphosphate > phytic acid > triphosphate의 순서로 나타났다. 천연 탄화수소 화합물도 바인더 수지의 난연성을 결정하기 위해 조사되었다. 그 결과 천연 탄화수소 바인더 수지가 난연성 부직포 제조에 사용될 수 있음을 보여주었다.

• 공업화학
• /
• 제16권2호
• /
• pp.250-256
• /
• 2005

자동차 산업에서의 도장 외관은 아주 중요하다. 이러한 도장외관의 향상을 위해서 기본적으로 도막의 내식성과 밀착성이 해결되어야 한다. 도막의 물성의 향상을 위해서 금속의 화성피막은 매우 중요한 요소가 되고 있다. 전착도장 중 음극에서의 pH는 12 정도까지 증가하고, 이 같은 강알카리 조건에서 금속과 화성피막의 용해가 일어난다. 이 같은 현상의 화성피막과 소재사이의 결합력을 감소시키게 된다. 일반적으로 인산염 피막구조는 hopeite 및 phosphphylife 구조를 갖지만 hopeite 피막 구조보다는 phosphophyllite 피막구조가 내식성이 보다 우수하고, 양이온 전착도료에 의한 전착도장에서 강알카리화된 계면에서 피막의 알카리 용해성이 적어 내수밀착성의 향상을 보인다. Ni, Mn 등의 보조금속의 첨가는 P-ratio (phosphophyllite/ hopeite + phosphophyllite)를 증가시키므로 내수 밀착성과 내식성을 향상시키게 됨을 알 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.147-147
• /
• 2003

탄소/탄소 복합체의 내산화 코팅을 위하여 산화티탄, 산화알루미늄, 산화이트륨 등을 포함하는 여러 가지 인산염계 유리를 제조하였다. 유리 산화물조성 몰비는 인산에 대하여 인산알루미늄을 15몰%, 30몰%, 45몰%로 하였고 산화티탄은 70몰%, 산화 이트륨은 25몰%이 되도록 코팅 액을 제조하였다. 제조 된 코팅액은 석영 도가니에서 열처리 하여 급냉 시켰으며, 급냉 시키고 다시 130$0^{\circ}C$, 1시간 동안 열처리하여 유리를 제조하였다. 제조된 유리의 열중량, 열팽창율, 열전도도를 분석하여 탄소 복합체와의 적합성을 조사하고, 내산화성 시험을 위해 탄소/탄소 복합체에 코팅액을 도포하여 산화 감량 비율을 측정하였다. 엑스선 회절분석기와 적외선 분광기를 통하여 인산염 유리의 구조분석을 실시하고 비커스 미세 경도 시험기를 이용하여 기계적 물성을 측정하였다.

• 열처리공학회지
• /
• 제10권3호
• /
• pp.165-171
• /
• 1997

Laser hardening for the piston ring groove of ductile cast iron was tried. Mechanical and microstructural investigation for the hardened area indicated that the laser heating technique could replace conventional induction hardening process completely and further showed that post grinding process would be eliminated by minimizing bulging of heat treated area. In laser hardening, the volume increase caused by martensitic phase transformation proved to be less than $10{\mu}m$, which insures no post machining on the hardened surface. As expected, the depth of hardening was inversely proportional to the beam scanning velocity and the highest surface hardness was obtained at the beam velocity of 0.75m/min. Heat treatment using phosphate coating demonstrated quite comparable result to the case of graphite suscepter.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.195-195
• /
• 2015

본 연구에서는 인산-망간 피막처리 공정 중에 생성되는 슬러지를 방지하기 위하여 인산-망간 화성처리액에 유기첨가제인 Tartaric acid를 첨가하여 내마모성 및 방청성 향상을 목적으로 슬러지를 방지하기 위한 인산-망간 화성피막의 특성을 연구하였다. Tartaric acid의 농도에 따른 표면 Morphology를 Scanning Electron Microscope (SEM)과 Energy Dispersive X-ray spectroscopy (EDS)을 이용하여 분석하였으며, EDS 분석을 통해 Mn, P, Fe, O, C의 성분을 확인 할 수 있었으며, 인산-망간 화성피막의 상(phase)을 확인하기 위하여 X-ray diffraction (XRD)을 분석을 통하여 $(Mn,Fe)_5H_2(PO_4)_44H_2O$으로 구성된 인산-망간 화성피막을 확인할 수 있었다. 또한 Tartaric acid의 농도에 따른 인산-망간 피막의 내마모 시험(Ball on disc) 및 경도시험을 실시하여 기계적인 특성 및 슬러지의 양에 대하여 분석하였다.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.372-376
• /
• 1998

Using calcium-phosphate-powder targets with the Ca/P ratios of 1.0-1.67, hydroxyapatite ($Ca_{10}(PO_4)_6(OH)_2$, HAp) thin films with 4-7㎛ thickness were prepared on titanium metal plates by r.f. magnetron sputtering, followed an annealing at $200^{\circ}C$ for 24 hr under a high water vapor pressure using an autoclave. All the specimens were systematically characterized by XRD, FT-IR, SEM and EDS analyses. The post-annealed films were confirmed to be a nonstoichiometric oxyhydroxyapatite by XRD and FT-IR measurements.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1107-1108
• /
• 2006

The coating of conductive polypyrrole (Ppy) on nonconductive ceramic substrates was performed by polymerization of pyrrole (Py) in an aqueous solution. The Ppy film was characterized by scanning electron microscopy and conductivity measurements. Electrophoretic deposition of bimodal alumina suspension prepared with a phosphate ester was performed using Ppy film as a cathode. Fabrication of alumina ceramics with irregular shapes or complicated patterns were also attempted by sintering the deposits together with the Ppy coated substrates in air.

• 한국정밀공학회지
• /
• 제12권6호
• /
• pp.87-95
• /
• 1995

In order to predict the case depth and case width in laser transformation hardening, a finite element method was used to analyze the temperature distribution on the material. Laser hardening of the specimens of SM45C and STE11steels was experimented by using the continuous wave CO$_{2}$ laser with the various travel speeds and the defocused Gaussian beam mode. Phosphate coating was adopted on the surface of SM45C to increase the absorption of 10.6 .mu. m laser energy. Experimental data show good agreement with the theoretical predictions. The maximum possible case depth can be predicted for the given laser hardening conditions, such as laser power, and travel speed.