• 한국산림과학회지
• /
• 제48권1호
• /
• pp.40-50
• /
• 1980

본(本) 연구(硏究)는 합판공장(合板工場)에서 증량제(増量剤)로 사용(使用)하고 있는 도입소맥분(導入小麥粉)을 국내(国內)에서 값싸게 생산(生産)할 수 있는 증량제(増量剤)로 대체(代替)키 위한 가능성(可能性)을 규명하기 위해 실시(実施)되었다. 증량재료(増量材料)로는 주(主)로 삼립부산물(森林副産物)을 이용개발(利用開発)키 위(爲)해서 밀가루, 목분(木粉), 수피(樹皮), 소나무낙엽(落葉), 포푸리낙엽(落葉)을 택(擇)하였으며 각각(各各) $100{\sim}105^{\circ}C$에서 24시간(時間)동안 전건(全乾) 시킨 다음 60~100mesh로 분쇄(粉碎)하였다. 증량방법(増量方法)은 요소수지(尿素樹脂)와 요소(尿素)-melamine 공축합수지(共縮合樹脂)는 소맥분(小麥粉), 목분(木粉), 수피분(樹皮粉), 포푸라낙엽분(落葉粉)을 각각(各各) 10, 20, 30, 50%로 증량(増量)하였으며 수용성석탄산수지(水溶性石炭酸樹脂)는 소맥분(小麥粉), 목분(木粉), 수피분(樹皮粉), 소나무낙엽분(落葉粉)을 각각(各各) 10, 20, 30, 50%로 증량(増量)하였다. 본(本) 연구(硏究)에서 얻은 결론(結論)은 다음과 같다. 1. 요소수지(尿素樹脂)에 있어서는 상태(常態) 및 내수접착력(耐水接着力) 모두 소맥분(小麥粉)을 능가(能加)하는 증량제(増量剤)가 없었다. 2. 요소(尿素)-melamine 공축합수지(共縮合樹脂)에 있어서 접착력(接着力)은 요소수지(尿素樹脂)보다 대체로 모두 양호(良好)하였으나 상태접착력(常態接着力)에 있어서 소맥분(小麥粉)보다 좋은 접착제(接着剤)는 없었다. 3. 요소(尿素)-melamine 공축합수지(共縮合樹脂)에 있어서 내수접착력(耐水接着力)의 경우 10, 20%증량(増量)에서 포푸라낙엽분(落葉粉), 소맥분(小麥粉), 목분(木粉)이 가장 양호(良好)했으며 이들간(間)의 유의적(有意的)인 차이(差異)는 없었다. 4. 수용성석탄산수지(水溶性石炭酸樹脂)의 경우 상태접착력(常態接着力)은 10% 증량(増量)의 경우 소맥분(小麥粉)보다도 소나무낙엽분(落葉粉)이 더 양호(良好)하였으며 20% 증량(増量)의 경우도 유의적(有意的)인 차이(差異)는 없었다. 5. 수용성석탄산수지(水溶性石炭酸樹脂)의 경우 내수접착력(耐水接着力)은 10% 증량(増量)의 경우 목분(木粉)이 소맥분(小麥粉)보다 우수(優秀)했으며 20, 30, 50% 증량(増量)의 경우 목분(木粉) 및 수피분(樹皮粉)은 소맥분(小麥粉)보다도 양호(良好)하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.388-396
• /
• 2009

본 연구에서는 두부비지 가수분해물과 페놀수지로 조제된 마루판 화장용 접착제의 접착성능을 확인하기 위하여 수행하였다. 먼저 두부비지를 황산과 수산화나트륨으로 화학적으로 개량한 후 가교제로 phenol formaldehyde (PF) prepolymer와 혼합하여 접착제를 조제하였는데, 이 접착제는 고형분 함량을 기준으로 35%의 황산 가수분해물(AC), 35%의 수산화나트륨 가수분해물(AK) 그리고 30%의 PF로 조제하였다. 이렇게 조제된 접착제를 고밀도섬유판에 $300g/m^2$의 비율로 도포한 후 참나무 무늬목을 접착시켜 $7kg/m^2$의 압력으로 $120^{\circ}C$에서 열압하여 마루판을 제조하였다. 제조된 마루판에 대하여 formaldehyde/phenol 몰비(1.8, 2.1, 2.4), 퇴적시간(0분, 10분, 20분), 열압시간(90초, 120초)이 평면인장강도, 준내수 박리율, 포름알데히드 방산량에 미치는 영향에 대해 조사하였다. 두부비지 접착제를 이용하여 제조된 목질마루판의 평면인장강도는 KS 규격의 최소값을 상회하였으며, 대부분의 포름알데히드 방산량 값은 KS 규격의 E0 기준에 근접하는 것으로 나타났다. 따라서 두부비지 접착제가 마루판 화장용 접착제로 사용될 수 있다는 가능성을 보여 주었으나, 상용화를 위하여 내수성의 향상과 포름알데히드 방산량의 저감을 위한 연구가 필요할 것으로 생각한다.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.14-18
• /
• 1998

A low density polyethylene(LDPE) was examined as an additive in phenol-formaldehyde(PF) resin adhesive for bonding radiata pine plywood. The LDPE was supplied by the commercial manufacturer. The LDPE was compared to a commercial filler commonly used in structural plywood adhesives in the United States. The adhesive mixes were made by following the recommended procedure of Georgia-Pacific Resins Inc.. using plywood-type PF resin. A total of 48 three-ply plywoods. 6.3 mm nominal thickness and 30 by 30 em in size, were made at two press times (4 and 5 min). two press temperatures (150 and $160^{\circ}C$) and 30 minute assembly times for four adhesive mixing types. Evaluations of the LDPE addition were carried out by performance tension shear tests after two cycle boil aging tests on plywood per the U.S. Product Standard PS I-83. After accelerated-aging tests. plywoods were exhibited no delamination. The test results included tension shear strength and estimated wood failure values. The plywood test results support the use of polyethylene as an additive in plywood adhesives.

• Journal of the Korean Wood Science and Technology
• /
• 제31권6호
• /
• pp.83-88
• /
• 2003

The woodceramics are porous amorphous carbon and glassy carbon composite materials. Woodceramics attracted a lot of attention in recent years because they are environmentally friendly and because of their unique functional characteristics such as catalysis, moisture absorption, deodorization, purification, carrier for microbial activity, specific stiffness, corrosion and friction resistance, and their electromagnetic shielding capacity. In this paper, we made new products of clay-woodceramics to investigate the industrial analysis and ethylene gas adsorption for basic data of building- and packging- materials keeping fruit fresh for a long time. Clay-woodceramics were carbonized for 3 h of heating in a special furnace under a gas flow of nitrogen(15 ml/min.) from 3 layers-clay-woodparticleboard made from pallet waste wood, phenol- formaldehyde resin(hereafter PF, Non volatile content:52%, resin content 30%), and clay(10%, 20% and 30%). Carbonization temperature was 400℃, 600℃ and 800℃. Experimental results shows that the higher the carbonization temperature, the higher the fixed carbon and the lower the volatile contents. The higher the clay content, the more the ash content. The higher the carbonization temperature, the more the ethylene gas adsorption. Carbonization temperature of 800℃ gave the best reslts as same as that of white charcoal and activated carbon.(800℃-clay-woodceramic: 5.36 ppm, white charcoal: 5.66 ppm, activated carbon: 5.79 ppm) The clay contents did not make difference of ethylene gas adsoption.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.253-264
• /
• 2019

This study characterized the chemical compounds in tannin from mangium (Acacia mangium) bark extract and determined the physical-mechanical properties of glued laminated timber (glulam) made from sengon (Falcataria moluccana), jabon (Anthocephalus cadamba), and mangium wood. The adhesives used to prepare the glulam were based on mangium tannin and phenol resorcinol formaldehyde resin. Five-layer glulam beams measuring $5cm{\times}6cm{\times}120cm$ in thickness, width, and length, respectively, were made with a glue spread of $280g/m^2$ for each glue line, cold pressing at $10.5kgf/cm^2$ for 4 h and clamping for 20 h. Condensed mangium tannin consisted of 49.08% phenolic compounds with an average molecular weight of 4745. The degree of crystallinity was 14.8%. The Stiasny number was 47.22%. The density and the moisture content of the glulams differed from those of the corresponding solid woods with mangium having the lowest moisture content (9.58%) and the highest density ($0.66g/cm^3$). The modulus of rupture for all glulam beams met the JAS 234-2003 standard but the modulus of elasticity and the shear strength values did not. Glulam beams made with tannin had high delamination under dry and wet conditions, but glulam made from sengon and jabon wood met the standard's requirements. All glulam beams had low formaldehyde emissions and were classified as $F^{****}$ for formaldehyde emissions according to the JAS 234 (2003) standard.

• Journal of the Korean Wood Science and Technology
• /
• 제31권5호
• /
• pp.15-22
• /
• 2003

국산 간벌재 3수종을 이용하여 밀도 및 수지첨가량을 달리해서 톱밥보드를 제조한 후 감압 후 상압, 감압·초음파 병행 후 상압으로 20분씩 3반복 함침하여 밀도 및 수지첨가량에 따른 함침 보드의 물성을 측정하고, 함침 시 초음파처리 효과를 조사하였다. 밀도 및 수지첨가량이 증가함에 따라 함침 보드의 밀도, 휨강도 및 브리넬 경도는 증가하였으나, 수지 함침율은 감소하였다. 감압·초음파 병행 후 상압 함침에 의한 함침보드의 밀도, 수지함침율, 휨강도 및 브리넬 경도가 감압 후 상압에 의한 함침 보드 보다 컸다. 보드 함침 시 초음파처리를 병행함으로써 수지 함침율이 증가되어 함침 보드의 물성에 영향을 미치는 것으로 판단된다.

• 임산에너지
• /
• 제24권1호
• /
• pp.28-32
• /
• 2005

목탄의 제조 과정 중 얻어지는 목타르의 활용방안을 모색코자 페놀수지에 목타르를 혼합하여 합판을 제조하여, 물리적, 기계적 및 포름알데히드 방출성능을 조사하였다. 목타르를 혼합하여 제조된 합판의 경우, 목타르를 혼합하지 않은 합판에 비해 물리적, 기계적인 면에서 별다른 감소를 보이지 않았으며, 인장전단 접착력은 비내수, 내수 모두 목타르의 혼합으로 인하여 오히려 향상되는 것으로 나타났다. 또한 포름알데히드 방출량에서도 목타르의 첨가는 방출량을 감소시키는 것으로 나타났다.

• 펄프종이기술
• /
• 제44권3호
• /
• pp.41-48
• /
• 2012

Materials used for the inks in the printing industry is an important material following the paper. The composition of the ink is pigment and organic solvents. However, Ink is used in a variety of chemicals, they are classified as non-green. Therefore, rosin-modified phenolics manufactured by the reaction of phenol and formaldehyde can take the place of eco-phenol free resin and by experiment density, gloss, trapping, contrast and dot gain of printing has been studied as printability. The result of study can support that the properties of printing using eco-phenol free resin such as density, gloss, contrast and trapping is similar to existing ink. In the part of dot gain, the result is excellent. So we were thought to be able to improve some characteristics such as dispersion of black ink, that will be possible for the field applicability.

• Journal of Microbiology and Biotechnology
• /
• 제6권2호
• /
• pp.116-119
• /
• 1996

The biological treatment by a mixed culture GE2 immobilized on activated carbon was investigated with a phenolic resin industrial wastewater containing 41,000 mg/l of phenol and 2,800 mg/l of formaldehyde. At a dilution of 20 times with aerated tap water, influent and effluent $COD_{Mn}$ were 4,587 mg/l and 46 mg/l, that is, $COD_{Mn}$ removal efficiency was 99.0%. At this time, phenol and formaldehyde con-centration of the effluent were 1.24 and 6.80 mg/l, indicating removal efficiencies of 99.9 and 94.1%, respectively.

• Carbon letters
• /
• 제8권1호
• /
• pp.17-24
• /
• 2007

Microporous carbons with narrow pore size distribution have been successfully synthesized by using hydrolyzed and calcined silica as templates and phenol formaldehyde (pf) resin as carbon precursor. Phenol formaldehyde-silica micro composites were prepared by solution route. Subsesequently, silica templates were removed by HF leaching. Resulting carbons were steam activated. The porous carbons were characterized by nitrogen adsorption-desorption isotherm, SEM, FTIR analysis, iodine adsorption, thermogravimetry analysis, etc. Adsorption isotherms show that the porous carbon prepared from calcined silica as templates are microporous with 88% pores of size <2 nm porosity and are of type I isotherm, while porous carbon prepared by using hydrolyzed silica are microporous with 89% microporosity, shows hysteresis loop at high relative pressure indicating the presence of some mesoporosity in samples. The microporosity in porous carbon materials has a bearing on the nature of silica templates used for pore formation.