• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.629-632
• /
• 1999

For replacing Li metal ai Lithium ton Bakery(LIB) system. we used carbon powder material which prepared by pyrolysis of phenol resin as starting material. It became amorphous carbon by pyrolysis through it\`s self condensation by thermal treatment. Amorphous carbon can be doped with Li intercalation and deintercalation because it has wide interlayer. however it has a problem with structural destroy causing weak carbon-carbon bond. So. we used ZnCl$_2$ as the pore-forming agent. This inorganic salt used together with the resin serves not only as the pore-forming agent to form open pores, which grow Into a three-dimensional network structure in the cured material, foul also as the microstructure-controlling agent to form a loose structure dope with bulky dopants. We analyzed SEM in order to find to different of structure. and can calculate distance of interlayer. CV test showed oxidation and reduction

• Journal of the Korean Wood Science and Technology
• /
• 제16권3호
• /
• pp.17-21
• /
• 1988

In order to investigate the extending effects on urea-formaldehyde resin- or phenol- formal- dehyde resin- glued keruing plywood, hot pressing temperatures were controlled to 110, 140, 170 and $200^{\circ}C$. As the extender, wheat flour, persimmon bark powder, chestnut bark powder, the equivalently- extended with the above three powders, and diatomite powder were respectively mixed with 5, 10, 15 and 20% ratios to the resin liquid, and also with these the no- extended was allowed. Based on the measured bonding strength, the conclusions were drawn: 1. In the urea- formaldehyde resin, extending effects on the bonding strength were in the order of wheat flour, the equivalently- extended with the wheat flour, persimmon- and chestnut bark powder, persimmon bark powder, chestnut bark powder. In the phenol- formaldehyde resin, the effects in the order of wheat flour, persimmon bark powder, diatomite powder, chestnut bark powder were resulted in. Specifically, superior bonding strength to the no-extended were given with the wheat flour and persimmon bark powder. 2. On the whole, the bonding strength decreased gradually, as the hot pressing temperature increased except for the diatomite powder extending.

• Journal of Preventive Medicine and Public Health
• /
• 제27권2호
• /
• pp.274-285
• /
• 1994

The effects of resin on the respiratory health have been investigated in 309 workers from four iron and steel foundries and the results compared with those from 122 workers who were not significantly exposed to resin gas and silica dust at the same industries. Phenol-formaldehyde resin was used in the core making and molding processes and workers were exposed to their decomposition products as well as to silica dust containing particulates. The subjects were grouped according to formaldehyde, dust and other gas exposures, and smoking habits were considered also in thi analysis. Standardized respiratory symptom questionnaire was administered by trained interviewers. Chest radiograph, pulmonary funtion tests, and methacholine challenge tests were done. Environmental measurements at the breathing zone were carried out to determine levels of formaldehyde, respiable dust and total dust. Foundry workers had a higher prevalence of symptoms of chronic bronchitis with chronic phlegm and chronic cough when exposed to dust. Exposure to gas was significantly associated with lowered $FEV_1$ and obstructive pulmonary function changes. Exposure to formaldehyde and phenol gas was associated with wheezing symptom among workers, but $FEV_1$ changes after methacholine challenge were not significantly different among different exposure groups. When asthma was defined as the presence of bronchial hyperreactivity with more than 20% decrease in $FEV_1$ after methacholine challenge, 17 workers out of 222 tested had asthma. Fewer asthmatic welters were found among groups exposed to formaldehyde, gas and dust, which indicates a healthy worker effects ill a cross-sectional study. The concentration of formaldehyde gas ranged from 0.24 to 0.43 ppm among studied foundries. The authors conclude that formaldehyde and phenol gas from combusted resin is probably the cause of asthmatic symptoms and also a selection force of those with higher bronchial reactivity away from exposures.

• KSBB Journal
• /
• 제11권5호
• /
• pp.577-585
• /
• 1996

본 연구에서는 페놀 분해 능력이 있는 활성슬러지 를 광경화성 수지에 포괄 고정화하여 페놀 분해에 미치는 영향인자에 대하여 조사 검토하였다. 고정화 활성슬러지의 경우 free 활성슬러지 보다 넓은 pH 범위에서 페놀 분해 상대활성도가 높게 나 타났￡며, 고정화비드 직경이 작을수록 페놀분해 시 간이 짧았다. 페놀농도 2000 mg/L까지는 free 활 성슬러지의 분해시간이 짧았으나, 3000 mg/L에서 는 고정화 활성슬러지의 분해능이 높았다. 고정화비 드 주입량에 따른 페놀 분해성은 반융기 내에 주입 된 고정화비드양에 정비례 하지는 않았으나 주입량 이 많을수록 페놀 처리율이 높았다. 고정화 활성슬 러지의 반융에서는 반복샤용 7회 이상일 때의 상대 활성도는 처음의 약 8배 정도 증가하였다. 고정화 활성슬러지를 합성폐수 또는 증류수에서 진탕 또는 정지상태로 20일간 보관한 후에는 700 mg/L의 페놀이 24시간 후면 거의 분해되었으며, 증 류수에 정지된 상태로, 40일간 보관한 후에는 마찬가지로 24시간 후에 96.7 % 이상이 분해되었다. 또 한 고정화 활성슬러지를 합성폐수에서 호기적으로 보존하면 80일간 보존이 가능하였다. 고정화 활성슬러지를 사용한 연속처리에서는 용적 부하 5.59 kg-phenol/m3.d에서 95 % 이상의 페놀 이 제거되었으며, 연속실험에서 페놀제거 효율이 95 % 이상일 때 처리성척을 비교해보면, 고정화 활성 슬러지 빛 free 활성슬러지 용척부하는 각각 7.46, 3 3.72 kg-phenol/m3.day로써 고정화 활성슬러지가 2배 더 높은 부하에서 처리가 가능하였다.

• Membrane and Water Treatment
• /
• 제6권6호
• /
• pp.439-449
• /
• 2015

Carbolic Acid which is called phenol is one of the important starting and/or intermediate materials in various industrial processes. However, its excessive release into environment poses a threat to living organisms, as it is a highly carcinogens and hazardous pollutant even at the very low concentration. Thus removal of phenol from polluted environments is very crucial for sustainable remediation process. We developed a low cost adsorption method for separating phenol from a model aqueous solution. The phenol adsorption was studied using two adsorbents i.e., Amber lite XAD-16 and Amber lite XAD-7 HP with a constant amount of resin 0.1 g at varying aqueous phenol concentrations ($50-200mgL^{-1}$) at room temperature. We compared the efficacy of two phenol adsorbents for removing higher phenol concentrations from the media. We investigated equilibrium and kinetics studies of phenol adsorption employing Freundlich, Temkin and Langmuir isotherms. Amberlite XAD-16 performed better than Amberlite XAD-7 HP in terms of phenol removal efficiency that amounted to 95.52%. Pseudo second order model was highly fitted for both of the adsorption systems. The coefficient of determination ($R^2$) with Langmuir isotherm was found to be 0.98 for Amberlite XAD-7 HP. However, Freundlich isotherm showed $R^2$ value of 0.95 for Amberlite XAD-16, indicating that both isotherms could be described for the isotherms on XAD-7 HP and Amberlite XAD-16, respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제39권4호
• /
• pp.344-350
• /
• 2011

라디에타소나무 단판적층재(LVL)를 제조함에 있어서, CuAz 및 ACQ 방부처리와 비처리, 수성비닐우레탄 접착제와 페놀변성 리조시놀수지 접착제의 상온경화형 접착제를 적용함에 따른 밀도경사, 접착 강도성능 및 내부후성(방부효력)을 살펴보았다. 결과, LVL의 밀도경사에서 접착층 주변이 원추형으로 밀도가 커지는 경사패턴을 보였다. 접착성은 수성비닐우레탄 접착의 경우, 자비반복시험 후 전층이 박리되거나, 일부 층이 박리하고 할렬 틈새 현상이 일어났다. 페놀변성 리조시놀수지 접착제 접착의 경우, 자비반복시험 후 접착층의 응력이 큰데 연유한 굽음과 상하 접착층 사이의 단판의 수직할렬 현상이 있었으나, 접착층의 박리나 할렬이 거의 발견되지 않아 침지박리접착력은 높은 것으로 판단되었다. 한편, 방부효력시험에 있어서, 수성비닐우레탄 접착제로 적층한 LVL의 경우 갈색부후균에 의한 부후도가 백색부후균보다 크게 나타났다. 페놀변성 리조시놀수지 접착제로 LVL을 제조한 경우에는 갈색부후균에 의한 질량감소가 적었고, 약제를 처리하지 않더라도 그 피해가 낮았으며, 약제처리한 것은 질량감소율 0 수준을 보일 정도로 방부효력이 큰 것을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권3호
• /
• pp.339-345
• /
• 2014

집성재의 생산성 향상을 위한 고주파 가열 경화기술에 대해 연구하였다. 고주파가 유전체에 가해지면 내부에서 에너지 손실에 의한 발열이 발생한다. 집성재를 구성하는 라미나와 접착제는 유전체이므로 집성재에 고주파를 주사하면 내부에서 발열이 발생한다. 집성재 제조에 이용되는 대부분의 상온 경화형 접착제는 고온에서 빠른 경화가 이루어지므로 고주파 가열 기술을 이용하면 집성재 내부 접착층의 온도를 상승시킴으로써 빠른 경화를 유도할 수 있다. 본 연구에서는 낙엽송재와 phenol-resorcinol-formaldehyde (PRF) 접착제의 유전 특성을 평가하고, 집성재 내부의 접착층의 빠른 경화를 유도하는 고주파 가열 경화 기작을 이론적으로 분석하였다. 연구 결과, 온도상승인자인 PRF 접착제의 상대손실계수가 낙엽송재의 상대손실계수에 비해 높았으나, 온도상승저해인자인 밀도와 비열도 높았다. 그러나 상대손실계수의 비율이 온도상승저해인자의 비율보다 높기 때문에 고주파 가열에 의한 발열량은 접착제에서 더 높을 것으로 예상된다. 이러한 실험 결과를 이용한 이론적 접근을 바탕으로, 접착층이 목표온도까지 상승하기 위한 ISM 영역의 고주파 주파수 별 전기장의 상대 세기를 추정하였다.

• 공업화학
• /
• 제32권2호
• /
• pp.174-179
• /
• 2021

인조흑연 제조용 바인더로 주로 이용되는 콜타르 핏치와 페놀 레진은 soft carbon 및 hard carbon의 초기 탄소화합물 구조에 차이가 있다. 따라서 탄화 온도에 따른 열분해 거동, 미세조직, 결정성의 변화 과정도 다를 것으로 예상할 수 있다. 본 연구에서는 콜타르 핏치 및 페놀 레진의 열분해 거동, 미세조직, 결정성 변화에 관하여 비교 분석하였다. 콜타르 핏치는 액상을 경유한 탄화 과정을 거치며, 탄화 온도가 증가함에 따라 미세조직이 점차 변화되는 것을 확인할 수 있었다. 탄화 온도가 증가함에 따라 콜타르 핏치 및 페놀 레진 모두 결정성은 증가하는 경향을 나타냈지만, 콜타르 핏치는 미세조직이 급변하는 500 및 600 ℃ 구간에서 결정성도 급격히 변화는 것을 확인할 수 있었다. 또한 미세조직과 결정성은 서로 밀접한 연관성이 있었다.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.19-26
• /
• 2017

The cure properties of ethoxysilyl bisphenol A type epoxy resin (Ethoxysilyl-DGEBA) systems with different hardeners were investigated, comparing with DGEBA and Diallyl-DGEBA epoxy resin systems. The cure kinetics of these systems were analyzed by differential scanning calorimetry with an isothermal approach, and the kinetic parameters of all systems were reported in generalized kinetic equations with diffusion effects. The Ethoxysilyl-DGEBA epoxy resin system showed lower cure conversion rates than DGEBA and Diallyl-DGEBA epoxy resin systems. The conversion rates of these epoxy resin systems with DDM hardener are lower than those with HF-1M hardener. It can be considered that the optimum hardener for Ethoxysilyl-DGEBA epoxy resin system is Phenol Novolac type. These lower cure conversion rates in the Ethoxysilyl-DGEBA epoxy resin systems could be explained by the retardation of reaction molecule movements according to the formation of organic-inorganic hybrid network structure by epoxy and ethoxysilyl group in Ethoxysilyl- DGEBA epoxy resin system.

• 한국가구학회지
• /
• 제10권1호
• /
• pp.51-56
• /
• 1999

This research was carried out to investigate the Hanji sludge(black color)-wood fiber and wood particle composited applied by waste sludges arising from the making process of Hanji (Korea paper). In experimental design, four levels of the mixed ratio of Hanji sludge to wood fiber or wood particle(10:90, 20:80, 30:70 and 40:60), three kinds of the resin(PMDI, urea and phenol resin)and three kinds of the specific gravity(0.6, 0.75 and 0.9) were designed to determine the tensile strength of Hanji sludge-wood fiber and wood particle composites. From the results and discussion, it may be concluded as follows: In Hanji sludge-wood fiber and wood particle composites, tensile strengths showed decreasing tendency absolutely by increasing Hanji sludge additive, but clearly increase with the increase of specific gravity. In Hanji sludge-wood fiber composites, there were no differences between PMDI and urea resin-bonded composites, but phenol resin-boned composites were made possibly until the addition of 30% Hanji sludge. On the other hand, Hnji sludge-wood particle composites(SpGr=0.6) have very low tensile strength values. But they were made favorably until the addition of 20% Hanji sludge in Hanji sludge-wood particle composites(SpGr=0.9).