• 한국가구학회지
• /
• 제25권3호
• /
• pp.207-212
• /
• 2014

With increased interests in environmental issues, people are looking for new materials that serve special and bio-activated functions. One of interesting materials is charcoal which has excellent adsorption ability for harmful volatile organic compounds, fireproof performance, far-infrared ray emission, and electromagnetic shielding. Since non-crack carbonized board was developed from wood-based composite materials, carbonization method might be applied to woodcraft products such as wood cup and bamboo. In this study, manufacture of wood charcoal bowl was conducted with carbonization method developed in 2009 in order to activate wood products market. Ash tree(Fraxinus rhynchophylla) cup was carbonized at $600^{\circ}C$ with two pretreatments which were phenol resin and wood tar solution treatment. After carbonization of ash tree cup, non-crack charcoal cup were successfully manufactured. Phenol resin treatment affected on charcoal cup manufacturing both positively and negatively. For a positive way, it prevented shrinkage. For a negative way, it decreased water repellency. On the contrary, wood tar treatment accelerated shrinkage a bit and increased water repellency. Based on the results, wood tar can be used as pre-treatment solution for reducing post-treatment costs. We confirmed woodcraft products can be carbonized without deformation, so carbonization may provide a high value-added products from wood.

• 한국환경과학회지
• /
• 제23권10호
• /
• pp.1693-1701
• /
• 2014

A rapid and simple method for the quantitative determination of volatile fatty acids (VFAs; propionic acid, n-butyric acid, i-valeric acid and n-valeric acid) and indoles (phenol, p-cresol, 4-ethyl phenol, indole and skatole) in pig slurry and dog excrement using solid-phase micro-extraction (SPME) coupled to gas chromatography was evaluated. $50/30{\mu}m$ DVB/CAR/PDMS (Divinylbenzene/Carboxen/Polydimethylsiloxane) fiber was used to extract the target compounds in aqueous media. Sample amount and adsorption time was standardized for the routine analysis. Detection limits were from 0.11 to $0.15{\mu}gL$ for VFAs and from 0.12 to $0.28{\mu}gL$ for indoles and the correlations observed ($R^2$) were 0.975~1.000. This method was applied to the pig slurry, fertilizer, compost and dog excrement. In nearly all cases, the indoles were detected in concentrations of higher than their limits of detection (DOLs). But the VFAs in swine manure were below their DOLs.

• Bulletin of the Korean Chemical Society
• /
• 제26권8호
• /
• pp.1214-1218
• /
• 2005

Ti-HMS samples in which titanium species exist in various forms of isolated tetrahedral state, finely dispersed $TiO_2$ cluster, and some in extra-framework anatase phase were prepared via a direct synthesis route using dodecylamine (DDS) as a structure directing agent by systematically varying the titanium loadings between 2 and 50 mol% Ti/(Ti+Si) in substrate composition. Physicochemical properties of the materials were evaluated using XRD, SEM/TEM, N2 adsorption, UV-vis and XANES spectroscopies. Catalytic properties of Ti-HMS in cyclohexene and 2,6-di-tert-butyl phenol (2,6-DTBP) oxidation using aqueous $H_2O_2$, and vapor phase photocatalytic degradation of acetaldehyde were evaluated. High $H_2O_2$ selectivity was obtained in cyclohexene oxidation, and cyclohexene conversion was found primarily dependent on the amount of tetrahedrally coordinated Ti sites. For bulky 2,6-DTBP oxidation and photocatalytic oxidation of acetaldehyde, on the other hand, conversions were found dependent on the total amount of Ti sites and maintaining an uniform mesoporous structure in the catalysts was not critical for efficient catalysis.

• Carbon letters
• /
• 제1권1호
• /
• pp.6-11
• /
• 2000

Coal tar pitch was chemically modified with 10 wt% benzoquinone (BQ) to raise the softening point of isotropic pitch precursor and the precursor was melt-spun into pitch fibers, stabilized, carbonized and activated with steam at $900^{\circ}C$. The weight loss of carbon fiber-benzoquinone (CF-BQ) increased with the increase of activation time like other fibers, but was lower than those of Kureha fiber at the same activation time in spite of larger geometric surface area. Those adsorption isotherms fitted into 'Type I' according to Brunauer, Deming, Deming and Teller classification. However, there was very thin low-pressure hysteresis that lower closure points of the hysteresis are about 0.42-0.45. From the pore size distribution curves, there might be some micropores having narrow-necked bottle; a series of interconnected pore is more likely than discrete bottles. FT-IR studies showed that the functional groups such as carboxyl, quinone, and phenol were introduced to ACFs-BQ surface after steam activation. Methylene blue decolorization and iodine adsorption capacity of ACF-BQ increased linearly with the increase of specific surface area and was larger than that of ACF-Kureha at the same specific surface area.

• 대한환경공학회지
• /
• 제31권7호
• /
• pp.541-548
• /
• 2009

본 연구에서는 매립장 침출수 같은 중금속과 유기물을 함께 함유하고 있는 폐수를 처리하기위하여, Fe(III)을 활성탄, 모래, 불가사리와 같은 담체에 첨착 및 코팅시킨 흡착제를 사용하였다. 제조된 Iron Impregnated Activated Carbon(Fe-AC), Iron Coated Sand(ICS), Iron Coated Starfish(ICSF)는 EPA 3050B 방법을 통하여 각 매질에 함유된 철 함량을 분석하였으며, 회분식 반응조에서의 흡착실험을 통하여 각 흡착제의 Mn(II), Zn(II) 및 Cu(II)의 제거성능을 비교하였다. Fe-AC 및 ICS의 철 함유량은 각각 1,612 mg/kg 및 1,609 mg/kg으로서 매우 유사하였으며 ICSF의 철 함유량은 1,768 mg/kg으로 ICSF의 철 코팅함량이 다른 두 가지에 비해 150 mg/kg 정도 높게 나타났다. 회분식 실험에서의 Mn(II), Zn(II), Cu(II)의 제거효율은 ICSF, Fe-AC, ICS의 순으로 높은 제거율을 보였다. 각 흡착제를 단일 및 다중층으로 충전한 칼럼반응기에 의한 연속식 실험결과, 단일 흡착제에 비해 ICS, Fe-AC, ICSF의 순으로 충전한 시스템에서 높은 중금속 및 페놀제거효율을 나타내었으며, Cu(II)와 Zn(II)에 대해서는 뚜렷한 파과능을 보였으나 Mn(II) 제거율은 상대적으로 낮게 나타났다. 각 흡착제를 병합 충전한 다중층 칼럼반응시스템은 중금속 및 phenol제거에 효과적임을 알 수 있었다.

• Asian Journal of Atmospheric Environment
• /
• 제11권1호
• /
• pp.15-28
• /
• 2017

The adsorptive removal properties of synthetic A4 zeolite were investigated against a total of 16 offensive odors consisting of reduced sulfur compounds (RSCs), nitrogenous compounds (NCs), volatile fatty acids (VFAs), and phenols/indoles (PnI). Removal of these odors was measured using a laboratory-scale impinger-based adsorption setup containing 25 g of the zeolite bed (flow rate of $100mL\;min^{-1}$). The high est and lowest breakthrough (%) values were shown for PnIs and RSCs, respectively, and the maximum and minimum adsorption capacity (${\mu}g\;g^{-1}$) of the zeolite was observed for the RSCs (range of 0.77-3.4) and PnIs (0.06-0.104), respectively. As a result of sorptive removal by zeolite, a reduction in odor strength, measured as odor intensity (OI), was recorded from the minimum of approximately 0.7 OI units (indole [from 2.4 to 1.6]), skatole [2.2 to 1.4], and p-cresol [5.1 to 4.4]) to the maximum of approximately 4 OI units (methanethiol [11.4 to 7.5], n-valeric acid [10.4 to 6.5], i-butyric acid [7.9 to 4.4], and propionic acid [7.2 to 3.7]). Likewise, when removal was examined in terms of odor activity value (OAV), the extent of reduction was significant (i.e., 1000-fold) in the increasing order of amy acetate, i-butyric acid, phenol, propionic acid, and ammonia.

• 한국항만학회지
• /
• 제14권3호
• /
• pp.373-378
• /
• 2000

Oil spill in sea water is the most frequent and significant problem of marine pollution. As an early detection sensor of the pollution, an activated carbon coated quartz crystal is prepared and examined for its performance of detection sensitivity and stability. Powdered activated carbon and phenol resin is coated on the surface of the sensor and the sensor is baked for an hour. Adsorption of acetone dissolved in water and salt water is measured using frequency shift of quartz crystal at different concentrations of solute material. The outcome indicates that the sensor preparation is adequate and the measurement of solute concentration is stable and sensitive enough to be implemented on the monitoring of solute concentration is stable and sensitive enough to be implemented in the monitoring of organic pollution of sea water.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.436-437
• /
• 2003

고형오구의 분산안정화 작용은 고체 입자의 계면에 흡착한 계면활성제에 의한 전기적 반발력과 입체적 보호작용에 영향을 받게 된다. 특히 현재 시판세제의 조성에서 비이온계 계면활성제의 혼합이 점차 중요시되는 이때 입체적 보호작용에 의한 고형오구의 분산안정성은 의류제품의 세척성 제고에 좋은 정보가 되리라 생각된다. 따라서 본 연구는 시판되고 있는 세제 대부분이 음-비이온계 계면활성제의 혼합으로 되어 있는 점을 고려하여 음이온 계면활성제로서 D5S(sodium dodecyl benzene sulfonate), 비이온계 계면활성계 NPE(nonyl phenol polyoxyethylene ether, EO$_{10}$) 혼합용액에서 음이온과 비이온계 계면활성제의 입자에의 흡착과 고형오구의 안정성을 관련시켜 고찰하였다. (중략)

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.135-138
• /
• 2003

Based on solid phase extraction, gas chromatography and mass spectrometry procedure for determining phenol and its derivatives in natural water was presented. In solid phase extraction, three types of techniques using solid phase adsorption material were treated with acid and salt, and converted second portion of acetyl derivatives. Under the these condition, extraction efficiency and detection ability dependent on extraction methods were discussed. Obtained results using optimized solid phase extraction techniques showed more convenience, simplifier and lower cost than the conventional analytical methods with holding wide dynamic range and lower detection limits.

• 대한화학회지
• /
• 제43권6호
• /
• pp.656-662
• /
• 1999

이 연구에서는 리간드 밀도가 높은 $C_18$정지상을 이용하여 30/70, 40/60, 50/50, 60/40, 70/30, 그리고 80/20(v/v %) 메탄올/물 이동상으로 25, 30, 35, 40, 45와 50$^{\circ}C$에서 benzene, toluene, ethylbenzene, phenol, acetophenone의 머무름 시간 자료를 얻었다. 이 자료로부터 van't Hoff 그래프를 그려 용질이 이동상에서 정지상으로 전이할 때 동반되는 엔탈피와 엔트로피 변화를 구하였다. 동공형성효과가 이동상과 정지상 간 용질분배에 주요한 인자임을 알았고 물의 함량이 높은 이동상에서는 소수성효과도 중요해 짐을 알았다. 또한 Shodex C18-5B 정지상은 부분적으로 흡착 메카니즘을 따르는 고밀도 고분자 형태 정지상인 것으로 결론을 내렸다.