• Korean Journal of Materials Research
• /
• v.13 no.5
• /
• pp.292-296
• /
• 2003

In an attempt to enhance phase transformation and homogenization of Mn-doped $FeSi_2$, mechanical alloying of elemental powders was applied. Cold pressing and sintering in vacuum were carried out to produce a dense microstructure, and then isothermal annealing was employed to induce a phase transformation to the $\beta$-$FeSi_2$semiconductor. Phase transitions in this alloy system during the process were investigated by using XRD, EDS and SEM. As-milled powders after 100 h of milling were shown to be metastable state. As-sintered iron silicides consisted of untransformed mixture of $\alpha$-$Fe_2$$Si_{5}$and $\varepsilon$-FeSi phases. $\beta$-$FeSi_2$phase transformation was induced by subsequent isothermal annealing at $830^{\circ}C$, and near single phase of $\beta$-$FeSi_2$was obtained after 24 h of annealing. Thermoelectric properties in terms of Seebeck coefficient, and electrical conductivity were evaluated and correlated with phase transformation. Seebeck coefficient electrical resistivity and hardness increased with increasing annealing time due to $\beta$ phase transformation.

• Korean Journal of Materials Research
• /
• v.11 no.12
• /
• pp.1068-1073
• /
• 2001

An n-type iron$silicide(Fe_{0.98}Co_{0.02}Si_2)$has been produced by mechanical alloying process and consolidated by vacuum hot pressing. Although as-milled powders after 120 hours of milling did not show an alloying progress,${\beta}-FeSi_2$phase transformation was induced by isothermal annealing at$830{\circ}C$for 1 hour, and the fully transformed${\beta}-FeSi_2$phase was obtained after 4 hours of annealing. Near fully dense specimen was obtained after vacuum hot pressing at$ 1100{\circ}C$with a stress of 60MPa. However, as-consolidated iron silicides were consisted of untransformed mixture of ${\Alpha}-Fe_2Si_5$and ${\varepsilon-FeSi$phases. Thus, isothermal annealing has been carried out to induce the transformation to a thermoelectric semiconducting${\beta}-FeSi_2$phase. The condition for${\beta}-FeSi_2$transformation was investigated by utilizing DTA, SEM, and XRD analysis. The phase transformation was shown to be taken place by a vacuum isothermal annealing at$830{\circ}C$and the transformation behaviour was investigated as a function of annealing time. The mechanical properties of${\beta}-FeSi_2$materials before and after isothermal annealing were characterized in this study.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.213-216
• /
• 2009

In this study, three cold-rolled TRIP steels containing different Al content (0.04wt%, 1.0 wt.% and 2.00wt%) were fabricated to understand the complex effects of Al in TRIP steel. The influences of Al on microstructural evolution of cold-rolled TRIP steels have been analyzed by using advanced analysis techniques, such as transmission electron microscope (TEM) and three dimensional atom probe tomography (3D-APT). TEM results revealed that second phases such as bainte and retained austenite decrease with increase of Al content. In addition, 3D-APT was used to characterize atomic-scale distribution of alloying elements at the constituent phases. Through these analysis techniques, the advanced characteristics of constituent microstructure in TRIP steels were identified depending on Al contents in TRIP steels.

• Computers and Concrete
• /
• v.5 no.4
• /
• pp.295-328
• /
• 2008

A previously published multiscale model for early-age cement-based materials [Pichler, et al.2007. "A multiscale micromechanics model for the autogenous-shrinkage deformation of early-age cement-based materials." Engineering Fracture Mechanics, 74, 34-58] is extended towards upscaling of viscoelastic properties. The obtained model links macroscopic behavior, i.e., creep compliance of concrete samples, to the composition of concrete at finer scales and the (supposedly) intrinsic material properties of distinct phases at these scales. Whereas finer-scale composition (and its history) is accessible through recently developed hydration models for the main clinker phases in ordinary Portland cement (OPC), viscous properties of the creep active constituent at finer scales, i.e., calcium-silicate-hydrates (CSH) are identified from macroscopic creep tests using the proposed multiscale model. The proposed multiscale model is assessed by different concrete creep tests reported in the open literature. Moreover, the model prediction is compared to a commonly used macroscopic creep model, the so-called B3 model.

• 연구논문집
• /
• s.23
• /
• pp.15-27
• /
• 1993

The single crystal specimens were solidified by modified Bridgeman method. The surface recrystallized single crystal specimens were prepared by shot peening followed by heat treatment. The surface recrystallization begins at the dendrite cores on the surface. The recrystallized grains grew into the inner side of the specimen. The growth of recrystallized grains was inhibited by the pores and eutectic phases. The primary $\gamma'$ phases were dissolved at the recrystallized grain boundaries during the grain growth. The grain growth of recrystallized grains was similar to the cellular type transformation. No orientation relationships were found bewteen the recrystallized grains and the parent phase.

• Journal of the Korean Ceramic Society
• /
• v.35 no.7
• /
• pp.665-670
• /
• 1998

Ferroelectric anomaly in PbO-{{{{ { {B }_{2 }O }_{3 } }}-{{{{ {TiO }_{3 } }}-BaO glasses which is observed in DAT measurements was in-vestigated together with the effect of BaO content on the shift of Cuire temperature. The temperature where the ferroelectric anomaly apperars on cooling in DTA decreased in proportion with increasing BaO content,. For as-crystallized samples the ferroelectric anomaly was not observed on heating but on cooling whilist for powder samples leached chemically from the crystallized samples both endothermic and ex-otehrmic peaks were observed. This fact suggests that the appearance of the ferroelectric anomaly in DAT largely depends on glassy phases surrounding individual {{{{ {PbTiO }_{3 } }} crystals rather than effects of grain size and crystallinity.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1295-1300
• /
• 2008

During the manufacturing and the service life of Au-Al wire bonded electronic packages, the ball bonds experience elevated temperatures and hence accelerated thermal diffusion reactions that promote the transformation of the Au-Al phases and the IMC growth. In this paper, the IC under high temperature storage (HTS) tests at $175^{\circ}C,\;200^{\circ}C$, and $250^{\circ}C$ are meticulously investigated. Thermal exposure resulted in the IMC growth, Kirkendall void and the crack of the Au-Al phases. The crack propagation occurs resulting in the failure of the Au-Al ball bonds. As the IC was exposed at the high temperature, decreased in the lifetime.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.3
• /
• pp.183-188
• /
• 2002

Antibacterial glass ceramics composed of $5Li_2O{\cdot}36CaO{\cdot}20TiO_2{\cdot}27P_2O_5$ were Prepared. After ion exchange in the $AgNO_3$solution, crystallization phases were $AgTi_2(PO_4)_3$, $LiTi_2(PO_4)_3$ and $Ca_3(PO_4)_2$. In case of ion exchange, the crystallization phases started to be transformed from $LiTi_2(PO_4)_3$ to $AgTi_2(PO_4)_3$in 0.5 mole $AgNO_3$ solution and the transformation was almost completed in 1.0 mole. ion exchange rate of glass-ceramics powder, considering ion exchange time, was more fast than that of bulk. The bacteriostatic effect of the glass-ceramics on Staphyloroccus aureus and Salmonella typhi bacteria was more excellent than that of glass when the crystallization phase was transformed from LTP to AgTP.

• Journal of the Korean Society for Railway
• /
• v.16 no.4
• /
• pp.348-351
• /
• 2013

The aim of this research is to analyze and periodize the relationship between railroad and river transportation as one aspect of the transformation of the land transportation system in Korea. As a result, three phases can be observed: a first phase of equality and interdependence (1910s); a second phase, subordinating rivers to feeder lines under railroad's dominance; and a third phase when trucks and buses became a major means for local transportation in place of traditional shipping routes. River ports were among the main planned destinations during the first and second phases, but such plans were changed or withdrawn after the third phase. This relationship between river and rail illustrates one geopolitical factor relating to the development of Korea's rail transportation network.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1145-1147
• /
• 2004

This paper proposed a new control method for single-phase hybrid active power filter. The proposed algorithm can change single phase system into the orthogonal system which has two phases giving time-delay in regular single phas and making the imaginary second phase. It can make orthogonal system like as being used in $3{\phi}/2{\phi}$ transformation with two phases. It can do complex calculation which calculates intantaneous reactive power. Istead of existing method applying to intantaneous reactive power theory in fixed reference frame, this paper proposed the algorithm which has advantage over reducing harmonics using rotating reference frame. It verified the effectiveness the proposed method through simulation and experiment.