• Journal of Veterinary Clinics
• /
• 제26권2호
• /
• pp.138-143
• /
• 2009

Ischemia/reperfusion injury(I/RI) is the major cause of acute renal failure and delayed graft function(DGF) unavoidable in renal transplantation. Enormous studies on ischemia damage playing a role in activating graft rejection factors, such as T cells or macrophages, are being reported. Present study was performed to determine whether ischemia time would play an important role in activating rejection-related factors or not in rat models of I/RI. Male Sprague-Dawley rats were submitted to 30, 45, and 60 minutes of warm renal ischemia with nephrectomy or control animals underwent sham operation(unilateral nephrectomy). Renal function and survival rates were evaluated on day 0, 1, 2, 3, 5 and 7. Immunofluorescence staining of dendritic cells(DCs), natural killer(NK) cells, macrophages, B cells, CD4+ and CD8+ T cells were measured on day 1 and 7 after renal I/RI. Survival rates dropped below 50% after day 3 in 45 minutes ischemia. Histologic analysis of ischemic kidneys revealed a significant loss of tubular architecture and infiltration of inflammatory cells. DCs, NK cells, macrophages, CD4+ and CD8+ T cells were infiltrated from a day after I/RI depending on ischemia time. Antigen presenting cells(DCs, NK cells or macrophages) and even T cells were infiltrated 24 hours post-I/RI, which is at the time of acute tubular necrosis. During the regeneration phase, not only these cells increased but B cells also appeared in more than 45 minutes ischemia. The numbers of the innate and the adaptive immune cells increased depending on ischemia as well as reperfusion time. These changes of infiltrating cells resulting from each I/RI model show that ischemic time plays a role in activating rejection related immune factors and have consequences on progression of renal disease in transplanted and native kidneys.

• The Journal of the Petrological Society of Korea
• /
• 제4권1호
• /
• pp.61-87
• /
• 1995

On the basis of lithology, the Precambrian Hongjesa Granitic Gneiss can be locally zoned into granoblastic granitic gneiss, porphyroblastic granitic gneiss, migmatitic gneiss from its center to the marginal part. There are no distinct differences in mineral assemblages by lithologic zoning, but it partly shows the change of mineral assemblage in the adjacent with migmatitic gneiss, thus mineral assemblage can be subdivided into Zone I and Zone II. In terms of mineral compositions, the characteristics of Zone I are coexisting K-feldspar+muscovite+sillimanite. The characteristics of Zone II are (1) breakdown of muscovite, (2) coexisting garnetScordierite, (3) coexisting garnet+cordierite + orthoamphibole. The Buncheon Granitic Gneiss is mainly composed of augen gneiss. In the adjacent area with Honjesa Granitic Gneisses, Buncheon Granitic Gneiss has the mineral assemblage of sillimanite+biotite+K-feldspar+(kyanite). Kyanite occurs as relict grains in the Buncheon and Hongjesa Granitic Gneissess. Kyanite shows anhedral to subhedral form and coexists with sillimanite in only one of these samples. Garnet from a migmatitic gneiss (Zone 11) has relatively high $X_{Fe}$ value in core and rim. Garnet from a porphyroblastic granitic gneiss(Zone I) has relatively homogemeous core but compositionally-zoned rim. Biotites show various colour from greenish-brown, brown to reddish brown at maximum adsorption. Also, the Ti, and Mg content in biotites increases from Zone I to Zone II. The plagioclases shows the chemical composition of $Ab_{84}An_{16}$ -$Ab_{70}An_{30}$ (oligoclase) in Zone I and $Ab_{70}An_{30}$ -$Ab_{50}An_{50}$(andesine) in Zone 11. These variations indicate that the gneisses in the study area experienced a upperamphibolite facies. The presence of kyanite as relict grains indicates that the metamorphic rocks in this area exprienced a high-temperature/medium-pressure type metamorphism, followed by high-temperaturellow-pressure metamorphism. Metamorphic P-T conditions for each gneiss estimated from various geothermobarometers and phase equilibria are 698-$729^{\circ}C$/6.3-11.3 kbar in augen gneiss, 621-$667^{\circ}C$/1.0-5.4 kbar in migmatitic gneiss, and 602-$624^{\circ}C$/1.9-3.4 kbar in porphyroblastic granitic gneiss. These data suggest that the study area was subjected to a clockwise P-T path with isothermal decompression (dP/dT=about 60 bar/$^{\circ}C$).

• Journal of Conservation Science
• /
• 제26권2호
• /
• pp.171-182
• /
• 2010

The slag excavated from Gyesil-ri in Gongju, Yeonje-ri in Cheongwon and Beopcheonsaji (temple) site in Wonju are analyzed by X-ray Fluorescence Analyzer, metallurgical microscope, SEM-EDS etc., for chemical composition and microstructure to figure out the raw material and the iron manufacturing technique. First of all, as a result of principal component analysis, the total Fe-content of slag from Gyesil-ri is 39 to 44% and the modified rate is 15 to 21%, which is common in ancient iron slag. Yeonje-ri site is found the ancient iron-smelting furnace. The total Fe-content of slag from Yeonje-ri is 41 to 43% and modified rate is 18~30%, which is also the general value in the ancient slag. However only slag is excavated in the residential area at Beopcheonsaji site and there is no iron making relic. In addition, the result of principal component analysis contains that the total Fe-content of Beopcheonsaji site is 52 to 57%, and modified rate is 8 to 14%. It shows that the total Fe-content of Beopcheonsaji site is higher than relic from Gyesil-ri and Yeonje-ri and the modified rate is lower than other sites. This results mean that recollecting rate of Fe in Beopcheonsaji site is lower than other sites. Also, as a result of minor elements analysis, the slag from Gyesil-ri has the higher level of Ti, V and Zr than other sites and the microstructure are observed as magnetite and ulvospinel, so that the raw material of slag is iron sand. But the slag from Yeonje-ri and Beopcheonsaji site are identified to use iron ore. As a result of microstructure observation, fayalite, gray-columnar crystal, is found in the slag from Yeonje-ri and big wustite as main phase is observed in the slag from Beopcheonsaji site. This study show that the slag from Yeonje-ri is made of smelt ash produced during smelting works and the slag from Beopcheonsaji site is made of forging ash produced during forging work concerning the excavated location and the microstructure.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제54권1호
• /
• pp.88-103
• /
• 2009

The volatile and semi-volatile compounds of 5 accessions of domestic scented and 25 accessions of introduced scented were extracted by solid phase microextraction (SPME) and analyzed by gas chromatographymass spectrum (GC-MS). A total of 156 volatile and semivolatile compounds were identified from 30 accessions of aromatic rice, including 32 alcohols, 25 acids, 25 ketones, 21 hydrocarbon, 18 esters, 16 aldehydes, 4 ethers, 5 amines, 2 phenols, 2 bases, and 8 miscellaneous compounds. By UPGMA/Neighbor-join tree analysis, the thirty accessions of aromatic rice could be classified into seven groups according to the major odor or aroma compounds. Group I included indica type of Basmati varieties. Group II and Group IV included japonica type introduced scented. Group III consisted only Hyangmibyeo1ho in domestic scented. Group V and Group VII included indica type of Basmati and non-Basmati varities. Group VI included four of domestic scented of seven accessions excepted Basmati6129, Basmati 6311, and Seratus Malam.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제10권11호
• /
• pp.3514-3523
• /
• 2009

Before 1990's, Korea had only few colleges that had film and film related majors. As Korean film industry started its marvelous improvement in both commercial and artistic phase, many colleges were interested in this new academic field. They hurried up to launch this new and profitable major; as a result, Korea now has more than hundred colleges and universities that has film related majors. Each college enumerates numbers of academic courses that may look reasonable; they have almost every course a fine film school should provide such as film theory, production, and performance in film. Lots of film schools offer lots of film courses; and they look alike. One unique thing in film major is its vast sub fields and categories. After you decide to study film, you have to select what specific field in film you want to study. Studying film theory and film production can be as different as majoring physics and physical education. The problem Korean colleges are dealing with is that there are too much film schools, and moreover those colleges have similar curriculums that just look like a department store that sells everything. One suggestion is specializing its curriculum in which the school can take advantages using their special conditions. San Francisco Art Institute is one of United States well known private film schools, but many people remember this school as a specialized film school in experimental film. San Francisco where this school is located has had many liberal and experimental artists as the city has been supporting and offering them an environment they can concentrate their work. Naturally, the school has world famous faculty members in experimental film, and students who want to study and make experimental film come to this school from all over the world because they know this school would be the best to study experimental film. There are many film schools in metro Los Angeles area; since its location near Hollywood, no wonder these schools concentrate on film producing and film production. They take advantage of their geographical location to hire film industry professional and to focus on commercial feature film productions. What we can do now to adjust the curriculum in film and film related major in Korean colleges is to adapt new standards in this changed film industry. One school can emphasize digital production while another school focuses on digital intermediate process. But if one school tries to both fields or all fields of film major just like we have done so far, the school could not take care of all the equipment and the faculty that the fields would need. Korean film schools should devide the field in film major and concentrate what they selected. Selection and concentration can be and should be applied in Korean film schools.

• Korean Journal of Animal Reproduction
• /
• 제9권1호
• /
• pp.9-30
• /
• 1985

The study was carried out to find out the changes of the sex hormone levels in the milk of Holstein cows during the reproductive stages such as the estrous cycle, pregnancy and periparturient period. The FSH, LH, estradiol-17$\beta$ and progesterone from the milk samples were assayed by radioimmunoassay methods. The results of this study were summarized as follows: 1. The levels of progesterone and estradiol-17$\beta$ were similar among inter-quarters, but they were higher in after milking than before milking times, with no statistical significance. 2. The milk progesterone levels during the estrous cycles reached a peak mean level of 3.55$\pm$0.26ng/$m\ell$ at 15 days after estrus and they did not show any differences among the length of estrous cycles. The estradiol-17$\beta$ levels during the estrous cycles showed a peak level of 36.40$\pm$2.38pg/$m\ell$ at estrus, and decreased(17.20$\pm$0.46 pg/$m\ell$ to 18.65$\pm$1.26pg/$m\ell$) at luteal phase. 3. The FSH levels during the estrous cycles ranged from 2.25$\pm$0.23mIU/$m\ell$ to 4.35$\pm$0.24mIU/$m\ell$ showing significant changes. The LH levels during the estrous cycles gradually increased and remained a peak level of 10.90$\pm$0.36mIU/$m\ell$ from 20 to 25 days after estrus. 4. The progesterone levels during the pregnancy were decreased from 30 to 60 days after artificial insemination, and therafter continuously increased until 240 days. The estradiol-17$\beta$ levels during the pregnancy were 24.56$\pm$1.19pg/$m\ell$ at day 30 after artificial inseminaton, and increased rapidly until 180 days. The levles were agagin decreased by 26.17$\pm$3.03pg/$m\ell$ until 210 days and markedly increased by 68.00$\pm$8.70pg/$m\ell$ until 240 days. 5. The prolactin levels during the pregnancy were 31.27$\pm$2.31ng/$m\ell$ and 42.60$\pm$2.37ng/$m\ell$ at day 150 and 240 after artificial insemination respectively. The LH levels during the pregnancy reached a peak of 27.47$\pm$7.90mIU/$m\ell$ at day 30 after artificial insemination, and thereafter gradually decreased. 6. The progesterone levels during the periparturient period reached a peak of 4.61$\pm$0.34ng/$m\ell$ at day 3 prepartum, and thereafter gradually decreased, and showed 2.05$\pm$0.60ng/$m\ell$ at day 7 postpartum. The estradiol-17$\beta$ levels during the periparturient period showed high level from 207.23$\pm$6.04pg/$m\ell$ at day 1 prepartum to 239.90$\pm$13.90pg/$m\ell$ at day 2 prepartum, and thereafter began to decline and reached 51.87$\pm$1.72pg/$m\ell$ at by 7 postpartum. 7. The prolactin levels during the periparturient period showed relatively higher level at the time of parturition. The LH levels during the periparturient period rnage from 6.32$\pm$0.32mIU/$m\ell$ to 13.90$\pm$1.37mIU/$m\ell$ showing significant changes. 8. The progesterone levels(4.6$\pm$0.8ng/$m\ell$) of the pregnant cows were significantly higher than those (1.84$\pm$1.4ng/$m\ell$) of nonpregnant cows. The cows of artificial insemination from 61 to 90 days after parturition showed higher progesterone levels. 9. During 20 to 25 days after artificial insemination, the accuracy of pregnancy diagnosis from milk progesterone levels were 94.4% for nonpregnant cows(<2.3ng/$m\ell$), and 75.0% for pregnant cows( 3.2ng/$m\ell$). The average overall accuracy of pregnancy prediction for nonpregnant and pregnant cows 83.3% 10. The results obtained this study suggest that the understanding of the endocrinological mechanisms by means of milk hormone analysis during the estrous cycle, pregnancy and parturition would give the basic information needed for increasing efficiency of reproduction. This study would not only provide an accurate method of the early pregnancy diagnosis by milk progesterone levels but also contribute to the research of providing the method of detecting of FSH levels in milk, which was difficult in blood serum.

• Journal of Life Science
• /
• 제21권11호
• /
• pp.1518-1525
• /
• 2011

Sorafenib is the only approved systemic, therapeutic agent for hepatocellular carcinoma (HCC). The use of Ginseng Extract (GE) in cancer patients is growing worldwide; however, drug interaction between sorafenib and GE has not been illuminated. Four different human cancer cell lines including HepG2 were used and immunocompetent mice were implanted subcutaneously with a mouse HCC cell line. Treatment with low dose GE stimulated cell growth, while a high dose inhibited growth. pERK (phosphorylation of extracellular signal-regulated kinase) was concomitantly increased and decreased respective of different doses of GE. Antitumoral effect of sorafenib decreased in non-proliferating phase cells but was sensitized after low dose GE (LDG) treatment. PD98059 (ERK phosphorylation inhibitor) efficiently blocked ERK phosphorylation, resulting in loss of sorafenib sensitization even after LDG treatment. In the HCC mouse model, LDG alone slightly increased tumor size while sorafenib alone significantly decreased it. However, a combination of LDG and sorafenib significantly decreased tumor size compared with sorafenib alone. Increase of pERK was observed in some normal mice organs and mild inflammatory change was observed in some of these organs, suggesting pERK activation by LDG may cause unexpected toxicity in normal cells. GE, dose-dependently, induced stimulation or inhibition in some human cancer cell lines. Combinational use of GE and sorafenib possibly potentiated an antitumoral response to sorafenib. pERK level has been provided as a potential predictive marker for sorafenib. Our result may suggest GE's dual effects in relation to pERK level in HCC cancer cell lines, and that certain doses of GE can sensitize sorafenib.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제18권3호
• /
• pp.248-256
• /
• 2007

In this paper, we propose a selective DFT spreading method to solve a high PAPR problem in uplink OFDMA system. A selective characteristic is added to the DFT spreading, so the DFT spreading method is mixed with SLM method. However, to minimize increment of computational complexity, differently with common SLM method, our proposed method uses only one DFT spreading block. After DFT, several copy branches are generated by multiplying with each different matrix. This matrix is obtained by linear transforming the each phase rotation in front of DFT block. And it has very lower computational complexity than one DFT process. For simulation, we suppose that the 512 point IFFT is used, the number of effective sub-carrier is 300, the number of allowed sub-carrier to each user's is 1/4 and 1/3 and QPSK modulation is used. From the simulation result, when the number of copy branch is 4, our proposed method has more than about 5.2 dB PAPR reduction effect. It is about 1.8 dB better than common DFT spreading method and 0.95 dB better than common SLM which uses 32 copy branches. And also, when the number of copy branch is 2, it is better than SLM using 32 copy branches. From the comparison, the proposed method has 91.79 % lower complexity than SLM using 32 copy branches in similar PAPR reduction performance. So, we can find a very good performance of our proposed method. Also, we can expect the similar performance when all number of sub-carrier is allocated to one user like the OFDM.

• Geophysics and Geophysical Exploration
• /
• 제12권1호
• /
• pp.121-131
• /
• 2009

In recent years, microtremor array observations have been used for estimation of shear-wave velocity structures. One of the methods is the conventional spatial autocorrelation (SPAC) method, which requires simultaneous recording at least with three or four sensors. Modified SPAC methods such as 2sSPAC, and linear array methods, allow estimating shear-wave structures by using only two sensors, but suffer from instability of the spatial autocorrelation coefficient for frequency ranges higher than 1.0 Hz. Based on microtremor measurements from four different size triangular arrays and four same-size triangular and linear arrays, we have demonstrated the stability of SPAC coefficient for the frequency range from 2 to 4 or 5 Hz. The phase velocities, obtained by fitting the SPAC coefficients to the Bessel function, are also consistent up to the frequency 5 Hz. All data were processed by the SPAC method, with the exception of the spatial averaging for the linear array cases. The arrays were deployed sequentially at different times, near a site having existing Parallel Seismic (PS) borehole logging data. We also used the imaginary part of the SPAC coefficients as a data-quality indicator. Based on perturbations of the autocorrelation spectrum (and in some cases on visual examination of the record waveforms) we divided data into so-called 'reliable' and 'unreliable' categories. We then calculated the imaginary part of the SPAC spectrum for 'reliable', 'unreliable', and complete (i.e. 'reliable' and 'unreliable' datasets combined) datasets for each array, and compared the results. In the case of insufficient azimuthal distribution of the stations (the linear array) the imaginary curve shows some instability and can therefore be regarded as an indicator of insufficient spatial averaging. However, in the case of low coherency of the wavefield the imaginary curve does not show any significant instability.

• Journal of Korean Society of Environmental Engineers
• /
• 제32권2호
• /
• pp.165-174
• /
• 2010

The numerical modeling of a coal gasification reaction occurring in an entrained flow coal gasifier is presented in this study. The purposes of this study are to develop a reliable evaluation method of coal gasifier not only for the basic design but also further system operation optimization using a CFD(Computational Fluid Dynamics) method. The coal gasification reaction consists of a series of reaction processes such as water evaporation, coal devolatilization, heterogeneous char reactions, and coal-off gaseous reaction in two-phase, turbulent and radiation participating media. Both numerical and experimental studies are made for the 1.0 ton/day entrained flow coal gasifier installed in the Korea Institute of Energy Research (KIER). The comprehensive computer program in this study is made basically using commercial CFD program by implementing several subroutines necessary for gasification process, which include Eddy-Breakup model together with the harmonic mean approach for turbulent reaction. Further Lagrangian approach in particle trajectory is adopted with the consideration of turbulent effect caused by the non-linearity of drag force, etc. The program developed is successfully evaluated against experimental data such as profiles of temperature and gaseous species concentration together with the cold gas efficiency. Further intensive investigation has been made in terms of the size distribution of pulverized coal particle, the slurry concentration, and the design parameters of gasifier. These parameters considered in this study are compared and evaluated each other through the calculated syngas production rate and cold gas efficiency, appearing to directly affect gasification performance. Considering the complexity of entrained coal gasification, even if the results of this study looks physically reasonable and consistent in parametric study, more efforts of elaborating modeling together with the systematic evaluation against experimental data are necessary for the development of an reliable design tool using CFD method.