• Title/Summary/Keyword: Phase-Average

Search Result 2,226, Processing Time 0.032 seconds

Correction of Lunar Irradiation Effect and Change Detection Using Suomi-NPP Data (VIIRS DNB 영상의 달빛 영향 보정 및 변화 탐지)

  • Lee, Boram;Lee, Yoon-Kyung;Kim, Donghan;Kim, Sang-Wan
    • Korean Journal of Remote Sensing
    • /
    • v.35 no.2
    • /
    • pp.265-278
    • /
    • 2019
  • Visible Infrared Imaging Radiometer Suite (VIIRS) Day/Night Band (DNB) data help to enable rapid emergency responses through detection of the artificial and natural disasters occurring at night. The DNB data without correction of lunar irradiance effect distributed by Korea Ocean Science Center (KOSC) has advantage for rapid change detection because of direct receiving. In this study, radiance differences according to the phase of the moon was analyzed for urban and mountain areas in Korean Peninsula using the DNB data directly receiving to KOSC. Lunar irradiance correction algorithm was proposed for the change detection. Relative correction was performed by regression analysis between the selected pixels considering the land cover classification in the reference DNB image during the new moon and the input DNB image. As a result of daily difference image analysis, the brightness value change in urban area and mountain area was ${\pm}30$ radiance and below ${\pm}1$ radiance respectively. The object based change detection was performed after the extraction of the main object of interest based on the average image of time series data in order to reduce the matching and geometric error between DNB images. The changes in brightness occurring in mountainous areas were effectively detected after the calibration of lunar irradiance effect, and it showed that the developed technology could be used for real time change detection.

Vulnerability Analyses of Wave Overtopping Inundation by Synthesized Typhoons with Sea-Level Rise (해수면 상승과 빈도 합성태풍이 고려된 월파범람 위험성 분석)

  • Kim, HyeonJeong;Suh, SeungWon
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.31 no.5
    • /
    • pp.253-264
    • /
    • 2019
  • Storm surges caused by a typhoon occur during the summer season, when the sea-level is higher than the annual average due to steric effect. In this study, we analyzed the sea-level pressure and tidal data collected in 1 h intervals at Incheon, Kunsan, Mokpo, Seogwipo stations on the Yellow Sea coast to analyze the summer season storm surge and wave overtopping. According to our analyses, the summer mean sea-level rise on the west and south coasts is approximately 20 cm and 15 to 20 cm higher than the annual mean sea-level rise. Changes in sea-level rise are closely related to changes in seasonal sea-level pressure, within the range of 1.58 to 1.73 cm/hPa. These correlated mechanisms generates a phase difference of one month or more. The 18.6 year long period tidal constituents indicate that in 2090, the amplitude of the $M_2$ basin peaks on the southwest coast. Therefore, there is a need to analyze the target year for global warming and sea-level rise in 2090. Wave overtopping was simulated considering annual mean sea-level rise, summer sea level rise, the combined effect of nodal factor variation, and 100-year frequency storm surge. As a result, flooding by wave overtopping occurs in the area of Suyong Bay, Busan. In 2090, overtopping discharges are more than doubled than those in Marine City by the recent typhoon Chaba. Adequate coastal design is needed to prepare for flood vulnerability.

Mechanisms of Salt Transport in the Han River Estuary, Gyeonggi Bay (경기만 한강 하구에서의 염 수송 메커니즘)

  • Lee, Hye Min;Kim, Jong Wook;Choi, Jae Yoon;Yoon, Byung Il;Woo, Seung-Buhm
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.33 no.1
    • /
    • pp.13-29
    • /
    • 2021
  • A 3-D hydrodynamic model is applied in the Han River Estuary system, Gyeonggi Bay, to understand the mechanisms of salt transport. The model run is conducted for 245 days (January 20 to September 20, 2020), including dry and wet seasons. The reproducibility of the model about variation of current velocity and salinity is validated by comparing model results with observation data. The salt transport (FS) is calculated for the northern and southern part of Yeomha channel where salt exchange is active. To analyze the mechanisms of salt transport, FS is decomposed into three components, i.e. advective salt transport derived from river flow (QfS0), diffusive salt transport due to lateral and vertical shear velocity (FE), and tidal oscillatory salt transport due to phase lag between current velocity and salinity (FT). According to the monthly average salt transport, the salt in both dry and wet seasons enters through the southern channel of Ganghwa-do by FT. On the other hand, the salt exits through the eastern channel of Yeongjong-do by QfS0. The salt at Han River Estuary enters towards the upper Han River by FT in dry season, whereas that exits to the open sea by QfS0 in wet season. As a result, mechanisms of salt transport in the Han River Estuary depend on the interaction between QfS0 causing transport to open sea and FT causing transport to the upper Han River.

Effects of dietary flavonoids on performance, blood constituents, carcass composition and small intestinal morphology of broilers: a meta-analysis

  • Prihambodo, Tri Rachmanto;Sholikin, Muhammad Miftakhus;Qomariyah, Novia;Jayanegara, Anuraga;Batubara, Irmanida;Utomo, Desianto Budi;Nahrowi, Nahrowi
    • Animal Bioscience
    • /
    • v.34 no.3_spc
    • /
    • pp.434-442
    • /
    • 2021
  • Objective: This study aims to evaluate the influence of dietary flavonoids on the growth performance, blood and intestinal profiles, and carcass characteristics of broilers by employing a meta-analysis method. Methods: A database was built from published studies which have reported on the addition of various levels of flavonoids from herbs into broiler diets and then monitored growth performance, blood constituents, carcass proportion and small intestinal morphology. A total of 42 articles were integrated into the database. Several forms of flavonoids in herbs were applied in the form of unextracted and crude extracts. The database compiled was statistically analyzed using mixed model methodology. Different studies were considered as random effects, and the doses of flavonoids were treated as fixed effects. The model statistics used were the p-values and the Akaike information criterion. The significance of an effect was stated when its p-value was <0.05. Results: Dietary flavonoids increased (quadratic pattern; p<0.05) the average daily gain of broilers in the finisher phase. There was a reduction (p<0.01) in the feed conversion ratio of the broilers both in the starter (linear pattern) and finisher phases (quadratic pattern). The mortality rate tended to decrease linearly (p<0.1) with the addition of flavonoids, while the carcass parameter was generally not influenced. A reduction (p<0.001) in cholesterol and malondialdehyde concentrations (both linearly) was observed, while super oxide dismutase activity increased linearly (p<0.001). Increasing the dose of flavonoids increased (p<0.01) the villus height (VH) and villus height and crypt depth (VH:CD) ratio (p<0.05) in the duodenum. Similarly, the VH:CD ratio was elevated (p<0.001) in the jejunum following flavonoid supplementation. Conclusion: Increasing levels of flavonoids in broilers diet leads to an improvement in growth performance, blood constituents, carcass composition and small intestinal morphology.

Emission Characteristics and Coefficients of Air Pollutants in Iron and Steel Manufacturing Facilities (제철제강시설의 대기오염물질 배출특성 및 배출계수 산정)

  • Kim, Byoung-Ug;Hong, Young-Kyun;Lee, Yeong-Seob;Yang, Seung-Pyo;Hyun, Geun-Woo;Yi, Geon-Ho
    • Journal of Environmental Health Sciences
    • /
    • v.47 no.3
    • /
    • pp.259-266
    • /
    • 2021
  • Objectives: This study was conducted to identify the emissions characteristics of total particulate matter (TPM), fine dust (PM10, PM2.5), and gaseous pollutants (SOx, NOx) in iron and steel manufacturing facilities in order to investigate emissions factors suitable for domestic conditions. Methods: Total particulate matter (TPM), fine dust (PM10, PM2.5), and gas phase materials were investigated at the outlet of electric arc furnace facilities using a cyclone sampling machine and a gas analyzer. Results: The concentrations of TPM ranged from 1.64 to 3.14 mg/Sm3 and the average was 2.47 mg/Sm3. Particulate matter 10 (PM10) averaged 1.49 mg/Sm3 with a range of 0.92 to 1.99 mg/Sm3, and the resulting ratio of PM10 to TPM was around 60 percent. PM2.5/PM10 ranged from 33.7 to 47.9% and averaged 41.6%. Sulfur oxides (SOx) were not detected, and nitrogen oxides (NOx) averaged 6.8 ppm in the range of 5.50 to 8.67 ppm. TPM emission coefficients per product output were in the range of 0.60 to 1.26 g/kg, 0.13 to 0.79 g/kg for PM10 and 0.12 to 0.36 g/kg for PM2.5, and showed many differences from the emissions coefficients previously announced. An emissions coefficient for NOx is not currently included in the domestic notices, but the results were calculated to be 0.42 g/kg per product output. Conclusions: Investigation and research on emissions coefficients that can reflect the characteristics of various facilities in Korea should be conducted continuously, and the determination and application of unique emissions coefficients that are more suitable for domestic conditions are needed.

Ferroelectric to Relaxor Transition Behavior in Lead-Free Ternary (Bi0.5Na0.5)TiO3-BiFeO3-SrTiO3 Piezoceramics (Bi0.5Na0.5TiO3-BiFeO3-SrTiO3 삼성분계 무연 압전 세라믹스의 강유전체-완화형 강유전체 상전이 거동)

  • Lee, Sang Sub;Lee, Chang-Heon;Duong, Trang An;Nguyen, Hoang Thien Khoi;Han, Hyoung-Su;Lee, Jae-Shin
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.34 no.1
    • /
    • pp.1-7
    • /
    • 2021
  • This study investigated the structural, dielectric, ferroelectric, and strain properties of (0.98-x)Bi1/2Na1/2TiO3-0.02BiFeO3-xSrTiO3 (BNT-BF-100xST, x=0.20, 0.22, 0.24, 0.26, and 0.28). All samples were successfully synthesized using the conventional solid-state reaction method and sintered at 1,175℃ for 2 h. The average grain size of the BNT-BF-100x ceramics decreased with increasing ST content. Furthermore, we observed that the ferroelectric- relaxor transition temperature (TF-R) decreased with increasing ST content, which eventually vanished in the BNT-BF-24ST ceramics. The results indicated that a ferroelectric to relaxor phase transition could be induced by ST modification. Consequently, a large electromechanical strain of 633 pm/V at 4 kV/mm was observed for the BNT-BF-26ST ceramics. These results imply that our materials have the competitive advantage of larger strain under lower operating field conditions compared with other BNT-based lead-free piezoelectric ceramics. We expect that BNT-BF-ST lead-free piezoelectric ceramics are promising candidates as a novel ternary BNT-based system and can find potential applications in actuators.

A Study on Inhibition of Bacterial Membrane Formation in Biofilm formed by Acne Bacteria in Valine through Property Analysis (물성 분석을 통한 Valine 의 여드름균 바이오필름 내부 세균막 형성 억제 연구)

  • Song, Sang-Hun;Hwang, Byung Woo;Son, Seongkil;Kang, Nae-Gyu
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.47 no.2
    • /
    • pp.163-170
    • /
    • 2021
  • This study was conducted to create a technology to remove acne bacteria with human-friendly materials. First, the Cutibacterium acnes (C. acnes) were adsorbed to the mica disc to grow, and then the biofilm was checked through an atomic microscope to see if the biofilm had grown. Based on the topographic image, the shape changed round, the size was 17% longer on average, and the phase value of the resonance frequency separating materials was observed as a single value, the biofilm grown by covering the extracellular polymeric substrate (EPS). As a result of processing 50 mM of amino acids in the matured biofilm, the concentration of C. acnes decreased when valine, serine, arginine and leucine were treated. Scanning with nanoindentation and AFM contact modes confirmed that the hardness of biofilms treated with Valine (Val) increased. This indicates that an AFM tip measured cell which may have more solidity than that of EPS. The experiment of fluorescent tagged to EPS displays an existence of EPS at the condition of 10 mM Val, but an inhibition of growth of EPS at the 50 mM Val. Number of C. acnes was also reduced above 10 mM of Val. Weak adhesion of biofilm generated from an inhibition of EPS formation seems to induce decrease of C. acnes. Accordingly, we elucidated that Val has an efficiency which eliminates C. acnes by approach of an inhibition of EPS.

The effect of Dy2O3 addition on crystal structure, grain growth, and dielectric properties in BaTiO3 (BaTiO3에서 Dy2O3 첨가가 결정구조, 입자성장 및 유전특성에 미치는 영향)

  • Ahn, Won-Gi;Choi, Moonhee;Kim, Minkee;Moon, Kyoung-Seok
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.32 no.4
    • /
    • pp.136-142
    • /
    • 2022
  • The crystal structure, grain growth behavior, and dielectric properties of BaTiO3 have been studied with the addition of Dy2O3. The powders were synthesized at ratios of (100-x)BaTiO3-xDy2O3 (mol%, x = 0, 0.5, 1.0, 2.0) by a conventional solid-state synthesis, and the powder compacts were sintered at 1250℃ for 2 hours in air. As the amount of added Dy2O3 was increased, the crystal structure of the sintered samples changed from a tetragonal to a pseudo-cubic structure, and the tetragonality decreased. In addition, a secondary phase of Ba12Dy4.67Ti8O35 appeared when Dy2O3 was added. The average grain size after sintering decreased and abnormal grains appeared as the amount of Dy2O3 increased. It can be explained that the grain growth behavior of the Dy2O3 added-BaTiO3 occurs due to the two-dimensional nucleation and growth, and is governed by the interface reaction. Further, the correlation between crystal structure, microstructure, and dielectric properties was discussed.

Changes in patterns of plastic surgery emergencies at a level I trauma center in India during the COVID-19 pandemic

  • Singh, Veena;Haq, Ansarul;Sharma, Sarsij;Kumar, Sanjeev;Kumar, Aditya;Kumar, Amarjeet;Kumar, Neeraj;Kumar, Anil
    • Journal of Trauma and Injury
    • /
    • v.35 no.2
    • /
    • pp.108-114
    • /
    • 2022
  • Purpose: The coronavirus disease 2019 (COVID-19) pandemic has had major effects worldwide, including sudden and forceful setbacks to the healthcare system. The COVID-19 pandemic has also led to changes in the plastic and reconstructive management of emergency cases, including those due to road traffic accidents. This study analyzed changes in patterns of plastic surgery emergencies and modifications in consultation policies to minimize the exposure of healthcare workers. Methods: Data on plastic surgery emergency calls received from the trauma and emergency department were collected for a period of 2 months before and during lockdown. The data were then analyzed with respect to the cause, mechanism, and site of the injury, as well as other variables. Results: During lockdown, there was a 40.4% overall decrease in the plastic surgery emergency case volume (168 vs. 100). The average daily number of consultations before lockdown was 2.8 as compared to 1.6 during lockdown. Road traffic accidents remained the most common mechanism of injury in both groups (45.8% vs. 39.0%) but decreased in number during the lockdown (77 vs. 39). Household accidents, including burns, were the second most common cause of injury in both phases (7.7% vs. 20.0%), but their proportion increased significantly from 7.7.% to 20.0% in the lockdown phase (P=0.003). The percentage of minor procedures done in the emergency department increased from 53.5% to 72.0% during lockdown (P=0.002). Procedures in the operating room decreased by 73.1% during lockdown (67 vs. 18, P=0.001). Conclusions: The COVID-19 pandemic and lockdown orders in India greatly influenced trends in traumatic emergencies as observed by the plastic surgery team at our tertiary care center. Amidst all the chaos and limitations of the pandemic period, providing safe and prompt care to the patients presenting to the emergency room was our foremost priority.

Studies on the Duration and Rate of Grain Filling in Rice (Oryza sativa L.) II. Difference between the Parts of a Panicle (수도의 등숙기간 및 등숙속도 연구 II. 이삭의 부위별 차이)

  • Cho, Dong-Sam;Jong, Seung-Keun;Son, Suk-Yeong;Park, Yeon-Kyu
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.33 no.1
    • /
    • pp.5-11
    • /
    • 1988
  • Varietal differences of grain filling duration and rate are generally recognized in rice (Oryza sativa L.). But the differences of grain filling characteristics between the parts within a panicle might be present since it takes 6-8 days to finish anthesis in a panicle. To elucidate this, 6 Japonica and 6 Japonica/Indica varieties were grown under three nitrogen levels at the Experimental Farm of Chungbuk National University in 1986, and grain filling characteristics of top, middle and bottom parts of a panicle were analyzed. Rice grain filling duration could be divided into 3 phases, i.e., Lag phase(LP) of 5 days after heading. Linear increasing period (LIP) of 5-20 days after heading and Late filling period (LFP) thereafter. Grain weight difference between the panicle parts was greater during LIP in all the varieties and was decreased during LFP. The difference was greater in Japonica/Indica varieties. Samgangbyeo and Seomjinbyeo had the shortest and the longest grain filling durations with 22.6 and 37.1 days, respectively. In average, grain filling duration of the bottom part of a panicle was 1-2 days shorter than that of top or middle part. The differences were negligible in Daecheongbyeo, Taebaegbyeo and Milyang 23, while it was greater in Tongil with 4.9 days. Grain filling rates were ranged from 0.612 to 1.097 mgㆍgrain$^{-1}$ㆍday$^{-1}$ㆍMilyang 23 showed the lowest rate with 0.612-0.682 mgㆍgrain$^{-1}$ㆍday$^{-1}$, while the rates of Baegyangbyeo, Yongmoonbyeo, Samgangbyeo, Nongbaeg and Daeseongbyeo were about 1 mgㆍgrain$^{-1}$ㆍday$^{-1}$ㆍGrain filling rate of bottom part of a panicle was lower than that of top or middle part. The difference was samll in Nongbaeg and Daeseongbyeo, while it was the greatest in Tongil with 0.222 mgㆍgrain$^{-1}$ㆍday$^{-1}$. Grain filling duration and rate were not afftected by nitrogen level, but varietal and spatial differences of grain filling characteristics were highly significant. However, the spatial difference of grain filling rates within a variety was not significant. Grain filling characteristics of each part of a panicle were significantly correlated (r=0.7207-0.9879) with those of a whole panicle.

  • PDF