• 전력전자학회논문지
• /
• 제6권3호
• /
• pp.265-272
• /
• 2001

기존의 전자레인지의 마그네트론 구동용 전원장치는 성층 철심을 사용한 60[Hz]고압 변압기, 큰 용량의 콘덴서와 싸이리스터를 이용한 위상제어 회로를 사용하기 때문에 부피가 크고 무거우며, 저효율의 단점을 가지고 있다. 본 논문은 출력 600[W]마그네트론을 장착한 전자레인지의 전원장치로 최대출력1[kW], 스위칭 주파수20[kHz]의 Phase-shifted Full-Bridge(FB)Zero-Voltage-Switched(ZVS) PWM 컨버터의 사용을 제안하고, 이를 개발.적용하여 전체 시스템의 경량화 및 고전력밀도의 목적을 달성하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1304-1306
• /
• 1995

In this study, a neural network algorithm through a data standardization method was developed to discriminate the phase-shifted partial discharge(PD) patterns such as a $\phi$-q-n pattern. Considering the PD measurement in the field, it is not so easy to acquire absolute phase angles of PD pulses. As a consequence, one of the significant problems to be solved in applying the neural network algorithm to practical systems is to develop a method that can discriminate phase-shifted $\phi$-q-n patterns. Therefore, authors established a new method which could convert phase-shifted $\phi$-q-n patterns to a standardized $\phi$-q-n pattern which was not influenced by phase shifting. This new standardization method improved the recognition performance of a neural network for the phase-shifted $\phi$-q-n patterns considerably.

• Current Optics and Photonics
• /
• 제6권6호
• /
• pp.634-641
• /
• 2022

A frequency stable and tunable optoelectronic oscillator (OEO) incorporating an optical phase shifter and a phase-shifted fiber Bragg grating (PS-FBG) is designed and analyzed. The frequency tunability of the OEO can be realized by using a tunable microwave photonic bandpass filter consisting of a PS-FBG, a phase modulator. The optical phase compensation loop is used to compensate for the phase variations of the RF signal from the OEO by adjusting an optical phase shifter. Simulation results demonstrate that the output RF signals of the OEO can be tuned in a frequency range of 118 MHz to 24.092 GHz. When the ambient temperature fluctuates within ±3.9 ℃, the frequency drifts of the output RF signals are less than 68 Hz, the side-mode suppression ratios are more than 69.39 dB, and the phase noise is less than -92.49 dBc/Hz at a 10 kHz offset frequency.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2496-2498
• /
• 2005

The transmission characteristics of multiply cascaded phase-shifted long-period fiber gratings (LPFGs) will be investigated theoretically and experimentally. Their passband can be changed by increasing the number of ${\pi}$ -shifted LPFGs. When two ${\pi}$ -shifted LPFGs with different grating lengths are cascaded in series, the bandwidth of the rejection band and passband can be controlled by the pristine characteristics of two gratings.

• Journal of Power Electronics
• /
• 제8권3호
• /
• pp.201-209
• /
• 2008

This paper presents the modeling and design of a digital controller for a phase-shifted full-bridge converter (PSFBC) in a discrete-time domain. The discretized PSFBC model is first derived and then analyzed considering the sampling effect and the system parameters. Based on this model, the digital controller is directly designed in a discrete-time domain. The simulation and experimental results are provided to show the validity of the proposed modeling and controller design.

• 전력전자학회논문지
• /
• 제18권5호
• /
• pp.501-506
• /
• 2013

A hold-up time compensation circuit is proposed to get high efficiency of the front-end phase-shifted full bridge DC/DC converter. The proposed circuit can make the phase-shifted full bridge front-end DC/DC converter built with 0.5 duty ratio so that the conduction loss of the primary side and voltage stress across rectifier in the secondary side are reduced and the higher efficiency can be obtained. Furthermore, the requirement of an output filter significantly can diminish due to the perfect filtered waveform. A 12V/100A prototype has been made and experimental results are given to verify the theoretic analysis and detailed features.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 추계학술대회 논문집
• /
• pp.218-219
• /
• 2016

This paper present Phase Shifted with carrier based on Sinusoidal PWM(SPWM) by using Cascaded NPC/H-birdge converter. The proposed Phase Shifted PWM method is adding third harmonic injection in switching signal. The advantage of the proposed method is reducing the voltage and capacity of the capacitor. This paper compare general Phase Shifted method with proposed Phase Shifted method that added the third harmonic injection. Each PWM method is tested without considering the switching loss by using PSIM 9.1.4 simulation.

• 산업기술연구
• /
• 제15권
• /
• pp.123-135
• /
• 1995

In this paper, we performed the modeling of a tunable three section DFB-LD with continuous phase using the coupled-wave equation. It was also proposed new modeling method for ${\lambda}/4$ phase shifted one. We got the characteristics of oscillation wavelength, gain, and photon density profiles according to parameters such as coupling coefficient K and current into the third sections for two case of continuous phase and ${\lambda}/4$ shifted phase one. The simulations for ${\lambda}/4$ phase shifted tunable three section DFB-LD prove that the continuous tuning range is about 4.2nm for $K=120cm^{-1}$, $L=180{\mu}m$, and the oscillation mode be within the stop-bands. Also when changed a current of both end sections, it is shown that a photon density reaches the maximum at the center.

• 융합신호처리학회논문지
• /
• 제14권1호
• /
• pp.39-44
• /
• 2013

본 논문에서는 멀티암(multi-arm) 스파이럴 안테나용 디지털 위상천이기(digital phase-shifter)를 힐버트 변환(Hillbert transform)을 이용하여 설계하였다. 힐버트 변환은 입력신호에 포함된 모든 주파수 성분을 $90^{\circ}$ 위상천이 시키며, 퓨리에 변환(Fourier transform)과 역퓨리에 변환(Inverse FIT)을 통해 구현된다. 디지털 위상천이기는 ADC(Analog-digital converter)로 샘플링된 입력신호에 힐버트 변환을 적용하여 위상차가 $90^{\circ}$인 두 신호를 생성하고, 이 두 신호를 이용하여 입력신호의 위상을 천이위상만큼 천이시키게 한다. 힐버트 변환 기반의 디지털 위상천이기는 Xilinx사의 System generator로 설계되었고, 입력 잡음, FFT 포인트 수, 샘플링 주기, 입력신호의 초기위상 및 천이 위상각 등에 따른 위상천이 성능을 시뮬레이션 하였으며, Matlab 결과와 비교하여 일치함을 확인하였다.

• 전력전자학회논문지
• /
• 제26권5호
• /
• pp.372-375
• /
• 2021

A three-leg inverter-type isolated DC-DC Converter that can use 220 and 440 V grid input voltages is introduced. The secondary circuit structure of the proposed topology is center-tap, which is the same as the conventional phase-shifted full-bridge converter. However, the primary circuit structure is composed of a three-leg inverter structure and a transformer, in which two primary windings are connected in series. The proposed circuit structure has a wider input voltage range than the conventional phase-shifted full-bridge converter, and the circulating-current on the primary-side is reduced. In addition, the voltage stress at the secondary rectifier is greatly improved, and high efficiency can be achieved at a high input voltage by removing the snubber circuit added to the conventional converter. Prototype converters with input DC of 311 V, output of 622 V, and 50 V and 6 kW class specifications were designed and manufactured to verify the validity of the proposed topology; the experimental results are presented.